JoAnn Axford on thu 17 jul 97
I am going to be testing some crystaline glazes in my new (computerized)
Skutt kiln. I would appreciate any help from anyone experienced in this
area. I have a couple ^ 3-4 glazes to try..Any glaze formulas or firing
schedules would be helpful. Thanks in advance. JoAnn Axford
J.C. Pot on sat 19 jul 97
Jo Ann,
I found a site with crystaline glaze:
http://www.barra.se/stoneware/glasyrer/recept/6713-31.htm
I hope you can find it, if not e mail me
Hannie
JoAnn Axford schreef in artikel
<970717002148_-1158235086@emout10.mail.aol.com>...
> ----------------------------Original message----------------------------
> I am going to be testing some crystaline glazes in my new (computerized)
> Skutt kiln. I would appreciate any help from anyone experienced in this
> area. I have a couple ^ 3-4 glazes to try..Any glaze formulas or firing
> schedules would be helpful. Thanks in advance. JoAnn Axford
>
Jim Duffy on mon 21 jul 97
I used to do some ^10 crystaline glazes. The critical time for this type
of glaze is the cooling cycle. Take your firing to peak at any normal
rate, then cool 100 degrees or so. Holdfor thirty minutes to allow the
crystals to develop. The Sanders book recommended in other mail is my
favorite and the source for the glazes I developed. Good luck.
JoAnn Axford wrote:
> ----------------------------Original
> message----------------------------
> I am going to be testing some crystaline glazes in my new
> (computerized)
> Skutt kiln. I would appreciate any help from anyone experienced in
> this
> area. I have a couple ^ 3-4 glazes to try..Any glaze formulas or
> firing
> schedules would be helpful. Thanks in advance. JoAnn Axford
Lasse Vstman on tue 29 jul 97
The correct URL is http://www.barra.se/stoneware
Go for Glaze Page - recipes - crystal. Look also on
the Exhibitions.
Lasse Vstman, author of the site
J.C. Pot wrote
> Jo Ann,
>
> I found a site with crystaline glaze:
> http://www.barra.se/stoneware/glasyrer/recept/6713-31.htm
> Hannie
>
> JoAnn Axford schreef in artikel
> > I am going to be testing some crystaline glazes in my new
(computerized)
> > Skutt kiln. I would appreciate any help from anyone experienced in
this
> > area. I have a couple ^ 3-4 glazes to try..Any glaze formulas or
firing
> > schedules would be helpful. Thanks in advance. JoAnn Axford
| |
|
