Gerry Barbe on fri 17 may 96
Hi,
The disclaimer first: I will recieve no financial gain from this
notice. I'm writing to you as a favour for a potter in London, Ontario,
Canada who is selling the contents of her studio after working in clay
since 1953. She has everything a potter would want. Some of the
equipment is old, like one of the first kiln sitters. It's still in the
box and has never been used. It's more of a museum piece, or
conversation piece than something you want to use. Most of the big
equipment is newer and in mint condition. If you want to know more
please email me privately:
Some of the contents:
Robert Brent Model C Wheel, 1'2 HP motor. Electronic speed control, 12"
head and splashpan. From the looks of it this wheel has never been
used. Price $800.00
Ball mill sith stand and motor, 2 one gallon and i one quart porcelain
jars. Price 175.00
Walker Pugmill (like new) with bagging mold and stand. Price $1400.00
Also for sale: Shelves of chemicals, glazes, underglazes, engobes, cones
(museum pieces), Books.
Enquiries to Marilyn Barbe via:
Gerry Barbe - gbarbe@julian.uwo.ca
Dept. OB/GYN
University of Western Ontario
London, Ontario, CANADA
______________________________________________________________________________
Karl David Knudson on fri 17 may 96
Are these prices in US$ or Canadian$? Do they include shipping?
On Fri, 17 May 1996, Gerry Barbe wrote:
> ----------------------------Original message----------------------------
> Robert Brent Model C Wheel, 1'2 HP motor. Electronic speed control, 12"
> head and splashpan. From the looks of it this wheel has never been
> used. Price $800.00
> Ball mill sith stand and motor, 2 one gallon and i one quart porcelain
> jars. Price 175.00
>
> Walker Pugmill (like new) with bagging mold and stand. Price $1400.00
>
> Also for sale: Shelves of chemicals, glazes, underglazes, engobes, cones
> (museum pieces), Books.
>
> Enquiries to Marilyn Barbe via:
>
> Gerry Barbe - gbarbe@julian.uwo.ca
> Dept. OB/GYN
> University of Western Ontario
> London, Ontario, CANADA
Gerry Barbe on sat 18 may 96
On Fri, 17 May 1996, Karl David Knudson wrote:
> ----------------------------Original message----------------------------
> Are these prices in US$ or Canadian$? Do they include shipping?
**The prices are Canadian but we love those greenbacks. She will not
ship articles. She has problems with her arms and back and can't do any
lugging or parcelling. Sorry the response has to be to the negative.
Yours, Marilyn Barbe in hot, hot, Ailsa Craig.
Gerry Barbe - gbarbe@julian.uwo.ca
Dept. OB/GYN
University of Western Ontario
London, Ontario, CANADA
______________________________________________________________________________
Jonathan Kaplan on mon 27 jan 97
I have a 2 level or 2 tier ball mill for sale with jars and grinding media.
Excellent condition, great price. If anyone on the list is interested,
please post me personally.
Jonathan
Jonathan Kaplan
http://www.craftweb.com/org/jkaplan/cdg.shtml
(aka "Scooter)
jonathan@csn.net
Ceramic Design Group Ltd./Production Services Voice:
970-879-9139 POB 775112
FAXmodem: same
Steamboat Springs, Colorado 80477, USA CALL before faxing
"Arrive on time, tell the truth, be a good listener, and don't
be too attatched to the results. Above all, maintain a sense of
humor!"
Jonathan Kaplan on fri 21 feb 97
Once again, if any on the list are interested in a killer deal on a 2 tier
ball mill, jars, and grinding media (sold all together) please post me
personally so as not to clutter the list.
Jonathan
Jonathan Kaplan
Ceramic Design Group Ltd./Production Services
PO Box 775112
Steamboat Springs CO 80477
jonathan@csn.net
(970) 879-9139*voice and fax
http://www.craftweb.com/org/jkaplan/cdg.shtml
Jonathan Kaplan on sat 7 mar 98
Still trying to sell my RAM tabletop press:
3 ton pneumatic RAM tabletop press with mobile cart
like new, 2 years old, mint condition paid $3200.00
sacrifice for $2000.00 FOB Steamboat Springs Co
no crating charge
also
Dayton/Graingers 60 gallon compressor(vertical style)
220 V 20 amps
brand new compressor pump
has powered our shop very well these many years
Asking $750, take both the press and the compressor for $2500.00
Seems like a great deal to me.
Jonathan
Jonathan Kaplan, president jonathan@csn.net
http://www.sni.net/ceramicdesign/
Ceramic Design Group Ltd./Production Services
PO Box 775112
Steamboat Springs CO 80477
(USPS deliveries only)
Plant Location
1280 13th Street Unit 13
Steamboat Springs CO 80487
( UPS, courier, and common carrier deliveries)
(970) 879-9139*voice and fax
http://www.sni.net/ceramicdesign/
http://digitalfire.com/education/clay/kaplan1.htm
Bill Geisinger on sat 6 jun 98
A friend of mine had their studio rent double. Thus there is lots of
equipment for sale. Give Kath a call at 408 554 9538. The materials are in
northern california thus if you cannot come and pick things up you might
want to pay for shipping. She has several fairly new electric wheels, and
extruder, spray booth, tables, etc.
Daniel Russ on sat 5 sep 98
The following used pottery equipment is for sale in the Reno, Nevada area. =
All
are in good working condition and are available for pick-up. They include:
Lockerbie kick wheels, a Pacifica GT800 w/seat and a Shimpo Master (M750)
electric wheel, a Walker and a 3.5=22 Venco de-airing pug-mill, a Soldner
=22Professional=22 clay mixer, and two Cress FXT31 kilns.
For details on these items reply to: nevadadan=40earthlink.net
john eden on mon 7 sep 98
Could you please give location and prices? Thankyou, John.
At 12:27 PM 9/5/1998 EDT, you wrote:
>----------------------------Original message----------------------------
>The following used pottery equipment is for sale in the Reno, Nevada area. =
>All
>are in good working condition and are available for pick-up. They include:
>Lockerbie kick wheels, a Pacifica GT800 w/seat and a Shimpo Master (M750)
>electric wheel, a Walker and a 3.5=22 Venco de-airing pug-mill, a Soldner
>=22Professional=22 clay mixer, and two Cress FXT31 kilns.
>
>For details on these items reply to: nevadadan=40earthlink.net
>
>
John Eden
Hudson, Quebec, J0P 1H0, Canada
Tel. # 514-457-6610 ext. 395 (office)
Tel. # 450-458-7097 (home)
e-mail> john.eden@johnabbott.qc.ca
Stephani Stephenson on tue 2 mar 99
Wanted to let everyone know about two kilns and a pugmill for sale,
north San Diego area.
KILN: Halvorsen, gas kiln. 30 cubic ft. shuttle/car kiln. excellent
condition.$4,200.
KILN:Halvorsen style, gas kiln. 24 cubic ft.double door. brand spankin'
new.$2,000.
PUGMILL: 5hp, $2,800.
For more info, call Laird Plumleigh, Alchemie studio, (760)-942-6051
Stephani Stephenson on tue 2 mar 99
Wanted to let everyone know about two kilns and a pugmill for sale,
north San Diego area.
KILN: Halvorsen, gas kiln. 30 cubic ft. shuttle/car kiln. excellent
condition.$4,200.
KILN:Halvorsen style, gas kiln. 24 cubic ft.double door. brand spankin'
new.$2,000.
PUGMILL: 5hp, $2,800.
For more info, call Laird Plumleigh, Alchemie studio, (760)-942-6051
Christen Grace Aaron on thu 17 aug 00
Having broken my thumb twice in the last 2 years, serious potting is
winding down for me.
Must sell the following equipment by 8/25. This is my final posting to
clayart... aren't any of you folks into haggling or counter-offering?
The following equipment is for sale in Southwest Colorado, Pagosa
Springs. Would be willing to deliver within a reasonable radius of 2-3
hours. Which includes Santa Fe...
Christen Aaron
970-264-543
cgrace@bwn.net
Venco 3" de-airing pug Mill mounted on a custom 2-wheeled welded steel
frame/cart, 20' cord, in-line 15 amp breaker (warranty requirement) and
has clocked less than 50 hrs of use.
asking $3000
Brent wall mounted extruder (no dies)
asking $200
Brent SR-20 Slab roller (the big one)
asking $1000
1/2 ton of cone 5 porcelain (laguna)
Misc. Glaze materials- gerstley borate, whiting, silica,
ball clay, kaolin, nepheline syn,
frit 3134, barium, manganese diox, and lots of stain,
12 cone 5 glazes already mixed up. recipes available as well.
Some tools- screens, etc..., My thought was to give the clay and glazes
away with the purchase of individual larger items.
Jonathan Kaplan on fri 2 mar 01
Here we go again....
I have the following for sale
1. Weiland 5 ton semi automatic hydraulic press. Mint condition. Lots of
round die rings included. Excellent machine for tile and small hollow ware.
2. Dayton(speedair) 3 HP vertical air compressor. 60 gallon tank, new
compressor head. 220 volts
The press is be crated no charge. Compressor is on a skid. All shipped FOB
Steamboat Springs Colorado.
Asking $2500 for the package. No reasonable offer refused.
Post me off the list or call me.
Jonathan
--
Jonathan Kaplan
Ceramic Design Group
PO Box 775112
Steamboat Springs CO 80477
jdkaplan@cmn.net
Plant Location (use for all UPS, Common Carrier, and Courier deliveries)
1280 13th Street
Steamboat Springs CO 80487
barbara lewis on fri 25 may 01
Hi everybody! I'm scaling down my studio. Will make pots, but also making
PMC jewelry and would like to free up some space & money to invest in new
insanity!
Brent Model C, less than 20 hours of use $575.00 (This wheel has been my
back-up wheel and is in excellent condition)
Bailey Standard 9 Extruder with 6 dies (4"round, 8"round, 4"octagon,
8"octagon, 8"square, 8" spherical bowl) $525.00 (Rarely used. Several
dies are unused)
If interested, contact me privately by e-mail or you can call me at (301)
932-3915. Leave a message if I'm not at home and I'll return your call. I
live in Southern Maryland, about 1 hour south of DC, 1.5 hours south of
Baltimore, 1.5 hours north of Richmond. Barbara
Estrellita Ammirati on sat 26 may 01
Hi Barbara:
Is the Brent Wheel still up for grabs. I'm not sure
if it's doable in terms of getting it to NY or how I
would work it out. Have to talk to hubby but thought I
would touch base with you first.
Thanks.
Estrellita
--- barbara lewis wrote:
> Hi everybody! I'm scaling down my studio. Will make
> pots, but also making
> PMC jewelry and would like to free up some space &
> money to invest in new
> insanity!
>
> Brent Model C, less than 20 hours of use $575.00
> (This wheel has been my
> back-up wheel and is in excellent condition)
>
> Bailey Standard 9 Extruder with 6 dies (4"round,
> 8"round, 4"octagon,
> 8"octagon, 8"square, 8" spherical bowl) $525.00
> (Rarely used. Several
> dies are unused)
>
> If interested, contact me privately by e-mail or you
> can call me at (301)
> 932-3915. Leave a message if I'm not at home and
> I'll return your call. I
> live in Southern Maryland, about 1 hour south of DC,
> 1.5 hours south of
> Baltimore, 1.5 hours north of Richmond. Barbara
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
Karen Ann Peters on sun 27 may 01
Sorry the Brent sold almost immediately to a local girl.
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
barbara lewis on tue 29 may 01
I'm sorry, but the wheel has already sold. Thanks for inquiring though.
Barbara
At 05:51 PM 5/26/01 -0700, you wrote:
>Hi Barbara:
>
>Is the Brent Wheel still up for grabs. I'm not sure
>if it's doable in terms of getting it to NY or how I
>would work it out. Have to talk to hubby but thought I
>would touch base with you first.
>
>Thanks.
>Estrellita
>--- barbara lewis wrote:
>> Hi everybody! I'm scaling down my studio. Will make
>> pots, but also making
>> PMC jewelry and would like to free up some space &
>> money to invest in new
>> insanity!
>>
>> Brent Model C, less than 20 hours of use $575.00
>> (This wheel has been my
>> back-up wheel and is in excellent condition)
>>
>> Bailey Standard 9 Extruder with 6 dies (4"round,
>> 8"round, 4"octagon,
>> 8"octagon, 8"square, 8" spherical bowl) $525.00
>> (Rarely used. Several
>> dies are unused)
>>
>> If interested, contact me privately by e-mail or you
>> can call me at (301)
>> 932-3915. Leave a message if I'm not at home and
>> I'll return your call. I
>> live in Southern Maryland, about 1 hour south of DC,
>> 1.5 hours south of
>> Baltimore, 1.5 hours north of Richmond. Barbara
>>
>>
>___________________________________________________________________________
___
>> Send postings to clayart@lsv.ceramics.org
>>
>> You may look at the archives for the list or change
>> your subscription
>> settings from http://www.ceramics.org/clayart/
>>
>> Moderator of the list is Mel Jacobson who may be
>> reached at melpots@pclink.com.
>
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Auctions - buy the things you want at great prices
>http://auctions.yahoo.com/
>
>___________________________________________________________________________
___
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
Darlene Beverlin on sun 10 jun 01
I have an extruder, 24" slab roller and a lockerbie motorized kickwheel =
for sale.
darlene
Have a super sun shine day
L. P. Skeen on sun 10 jun 01
Goody. Where are you?
----- Original Message -----
From: Darlene Beverlin
To:
Sent: Monday, June 11, 2001 12:19 AM
Subject: equipment for sale
I have an extruder, 24" slab roller and a lockerbie motorized kickwheel for
sale.
darlene
Have a super sun shine day
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Jeff Lawrence on sun 10 jun 01
Hello Clayart,
The auction almost cleared out almost everything, but some items are
still for sale:
- 400 gallon tanks -- $1650 for both:
#1 is 600 rpm prop mixer/agitator,
#2 is 2.5 rpm storage ark with alumuminum paddle
- 4 inch Venco deairing pug mill, 3 years old, only white clay
ingested, with shopbuilt wooden truck $3200
- Autopotter jolly jigger (and vertical lathe) $2100
- 8" fiber car kiln (MFT variation) movable intacto with
forklift and flatbed $8500
Everything is cash and carry -- I am no longer doing shipping.
Also, please note that my phone and email have changed -- old
ones no longer work.
Jeff Lawrence ph. 505-660-3642
Los Alamos, NM 87544 jml@cybermesa.com
Eric Suchman on mon 11 jun 01
>From: Darlene Beverlin
>Reply-To: Ceramic Arts Discussion List
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: equipment for sale
>Date: Sun, 10 Jun 2001 23:19:11 -0500
>
>I have an extruder, 24" slab roller and a lockerbie motorized kickwheel for
>sale.
>
>darlene
>
>Have a super sun shine day
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.
Where do you have this Lockerbie wheel? How much are you asking for it? I'm
in Southern California. -Eric
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
m markey on mon 11 jun 01
Hi Darlene!
Since many of us may or may not live near where your equipment is, could you
tell us where you live (City, State, country). Remember, this is an
international group.
Thanks!
Mohabee NakedClay@Hotmail.com
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
jcullen on mon 11 jun 01
Maybe Darlene would like to tell us where the equipment is located and
asking prices.
----- Original Message -----
From: "Darlene Beverlin"
To:
Sent: Sunday, June 10, 2001 11:19 PM
Subject: equipment for sale
I have an extruder, 24" slab roller and a lockerbie motorized kickwheel for
sale.
darlene
Have a super sun shine day
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Penni Stoddart on mon 11 jun 01
Darlene,
Where are you located? ANd how can we contact you off list about these
items??
Penni Stoddart
----- Original Message -----
From: "Darlene Beverlin"
To:
Sent: Monday, June 11, 2001 12:19 AM
Subject: equipment for sale
I have an extruder, 24" slab roller and a lockerbie motorized kickwheel for
sale.
darlene
Have a super sun shine day
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Jean Stephenson on mon 11 jun 01
Where are you located? Thanks, Jean
----- Original Message -----
From: "Eric Suchman"
To:
Sent: Monday, June 11, 2001 6:41 AM
Subject: Re: equipment for sale
> >From: Darlene Beverlin
> >Reply-To: Ceramic Arts Discussion List
> >To: CLAYART@LSV.CERAMICS.ORG
> >Subject: equipment for sale
> >Date: Sun, 10 Jun 2001 23:19:11 -0500
> >
> >I have an extruder, 24" slab roller and a lockerbie motorized kickwheel
for
> >sale.
> >
> >darlene
> >
> >Have a super sun shine day
> >
>
>___________________________________________________________________________
___
> >Send postings to clayart@lsv.ceramics.org
> >
> >You may look at the archives for the list or change your subscription
> >settings from http://www.ceramics.org/clayart/
> >
> >Moderator of the list is Mel Jacobson who may be reached at
> >melpots@pclink.com.
> Where do you have this Lockerbie wheel? How much are you asking for it?
I'm
> in Southern California. -Eric
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
John Gibson on tue 12 jun 01
Darlene, where are you, how much, mfg. on extruder, and slabroller, how old
each? thanks John
Monica Klement on tue 12 jun 01
Darlene!
Where are you located?
Monica
LakesidePottery@AOL.COM on sat 24 nov 01
Hi,
Where are you located?
Thanks, Morty
linda blossom on sat 24 nov 01
Dear Roger,
I would be interested in your burners. Email me if they are still
available. I will be driving to NY from Ca next week. I'll leave here on
Friday morning and have a friend helping with the driving so that I can go
through without spending the night. I will go through St Louis and thought
about stopping to get them but the space in the car is at a premium since I
will be traveling with three dogs! I can send a check Monday however and
have you check on the cost to send them ups.
thanks,
Linda Blossom
760-510-6488
Linda Blossom
760-510-6488
240 S. Bent
San Marcos, CA 92069
lindablossom@att.net
www.nottinghamarts.org
----- Original Message -----
From: "ROGER CLARK"
To:
Sent: Saturday, November 24, 2001 5:27 PM
Subject: equipment for sale
I HAVE A DUNCAN KILN 1029-1 FOR SALE. APPROX 11 YEARS OLD. BRICKS ARE =
IN GOOD SHAPE. ASKING $600.00 OR BEST OFFER. THIS WILL NEED TO BE PICKED =
UP AT MY HOME, TOO BIG FOR ME TO ARRANGE SHIPPING. I ALSO HAVE 2 RANSOM =
BURNERS WITH THE BASO SAFETY VALVE ATTACHED. I HAD BOUGHT FOUR OF THESE =
IN ONE LOT BUT ONLY NEEDED THE TWO. I AM ASKING $330.00 FOR THE TWO OF =
THEM.
I HAVE A SCOTT CREEK SUPERDUTY CLAY EXTRUDER WITH THE 5-INCH EXPANSION =
BOX AND ONE WOOD DIE KIT FOR SALE. HAVE OVER 550.00 INVESTED. ONLY USED =
MAYBE 5 TIMES. SELLING ALL FOR $350.00 THIS AND THE BURNERS CAN BE =
SHIPPED UPS. I LIVE IN SOUTHEAST MISSOURI NEAR CAPE GIRARDEAU, MO. YOU =
CAN TELEPHONE ME AT (573) 624-8535 AFTER 6PM CENTRAL TIME.
E-MAIL ME AT crpotts@bootheel.net
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
ROGER CLARK on sat 24 nov 01
I HAVE A DUNCAN KILN 1029-1 FOR SALE. APPROX 11 YEARS OLD. BRICKS ARE =
=3D
IN GOOD SHAPE. ASKING $600.00 OR BEST OFFER. THIS WILL NEED TO BE PICKED =
=3D
UP AT MY HOME, TOO BIG FOR ME TO ARRANGE SHIPPING. I ALSO HAVE 2 RANSOM =
=3D
BURNERS WITH THE BASO SAFETY VALVE ATTACHED. I HAD BOUGHT FOUR OF THESE =
=3D
IN ONE LOT BUT ONLY NEEDED THE TWO. I AM ASKING $330.00 FOR THE TWO OF =
=3D
THEM.
I HAVE A SCOTT CREEK SUPERDUTY CLAY EXTRUDER WITH THE 5-INCH EXPANSION =
=3D
BOX AND ONE WOOD DIE KIT FOR SALE. HAVE OVER 550.00 INVESTED. ONLY USED =
=3D
MAYBE 5 TIMES. SELLING ALL FOR $350.00 THIS AND THE BURNERS CAN BE =3D
SHIPPED UPS. I LIVE IN SOUTHEAST MISSOURI NEAR CAPE GIRARDEAU, MO. YOU =
=3D
CAN TELEPHONE ME AT (573) 624-8535 AFTER 6PM CENTRAL TIME.
E-MAIL ME AT crpotts@bootheel.net
ROGER CLARK on mon 26 nov 01
I AM LOCATED IN DEXTER, MISSOURI. 3 HOURS SOUTH OF ST.LOUIS AND 3 HOURS
NORTH OF MEMPHIS, TN.
THANKS
TAMMY CLARK
----- Original Message -----
From:
To:
Sent: Saturday, November 24, 2001 8:05 PM
Subject: Re: equipment for sale
> Hi,
> Where are you located?
>
> Thanks, Morty
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
Ceramic Design Group on thu 26 sep 02
I need to sell some equipment as we are downsizing into something much more
manageable. (we are still VERY MUCH in business!)
2 Lehman 100 gallon blungers 220-240V catalog#3236B excellent condition
heavy duty stand included $800 each
1 Wilden air operated pump 150.00
8 Lehman casting tables, molded fiberglass 31" wide x 97" long with dowels
and legs catalog #CT8
$250 each
You can also buy this entire casting system for the discounted price of
$3500.
Post me off the list if interested.
Jonathan
--
Jonathan Kaplan
Ceramic Design Group
PO Box 775112
Steamboat Springs CO 80477
infor@ceramicdesigngroup.net www.ceramicdesigngroup.net
(use PO BOX for all USPS correspondence)
970 879-9139
Plant Location
1280 13th Street
Steamboat Springs CO 80487
(use PLANT LOCATION for all UPS, Common Carrier, and Courier deliveries)
Cindy Gatto on thu 26 sep 02
Johnathan:
Where is the equipment located at? As far as in relation
to NYC.
Thanks: Mark
Phil Raskin on tue 3 dec 02
50 Gallon capacity slip casting table. Pump fills molds and conditions the
slip. This is a great production toll for slip casting pottery, figurines,
tableware, and multi-part forms. Almost new condition. ready to add clay
and start pouring. Molds are filled with the handle and turned over to
drain on the hardwood racks.
612 871 3421 North Prairie Tileworks Minneapolis MN
Cindy Gatto on thu 16 jan 03
Hello All:
We have some equipment that we want to sell.
1) There is a small table top electric test kiln - Aim test kiln 110 volt 15
amp model 64 j, in excellent shape asking for $100.
2) A home made Giorginni tile press, built to the exact specifications of the
Frank Giorginni tile making book. Works great. $100.00.
3) A stand up treadle wheel manufacturer and model unknown, All metal looks
just like the Amaco stand up treadle wheel. Good condition. $100.00
4) 1 Bag electric cement mixer - 110 volt, Hardly used. $200.00
You can e mail us at Mudpitnyc@aol.com or you can call either Cindy or Mark
at 718-218-9424. Everything is located at our shop The Mudpit in Brooklyn,
NY.
Thank You
Cindy Gatto & Mark Petrin
The Mudpit
228 Manhattan Ave
Brooklyn NY 11206
718-218-9424
mudpitnyc@aol.com
www.mudpitnyc.com
bea pix on sun 19 jan 03
hi, are you on line now?
can i come tomw to see the press?
how do i get to you by subway?
what hours will you be there, do you think?
thanks,
bernice
njzappa on tue 15 mar 05
We have a 20 cubic foot stackable gas fiber kiln for sale & a motorized
Randall potters wheel. We are in Montrose CO.
e-mail for info.
HYPERLINK "mailto:info@zappapottery.com"info@zappapottery.com
Nick Zappa
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005
njzappa on mon 21 mar 05
We have a Gas Fiber Kiln (20 cubic ft. stackable) and 1 Randall motorized
wheel for sale.
Please contact off list for information.
HYPERLINK "mailto:info@zappapottery.com"info@zappapottery.com
Nick & Joan Zappa
Zappa Pottery
18220 Puma Trail
Montrose, CO. 81401
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005
njzappa on wed 6 apr 05
We have a Fiber kiln (20cubic feet stackable, with shelves) for sale. Also a
bunch of straight, number 1&2 arch, soaps, and super size hard bricks for
sale. Please contact off list for info.
Nick
Nick & Joan Zappa
Zappa Pottery
18220 Puma Trail
Montrose, CO. 81401
e-mail info@zappapottery.com
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.3 - Release Date: 4/5/2005
C. Tullis on tue 15 mar 11
Older bluebird pug mill - 6"
Thomas Stuart kickwheel
$400 each
located in Denver, CO
email or call with questions
clyde.tullis@gmail.com
719-221-3255
| |
|
