search  current discussion  categories  kilns & firing - misc 

fireproof glue

updated fri 31 may 96

 

Richard Burkett on tue 23 apr 96


I just saw this on the sci.materials.ceramics newsgroup:

>The glue I use for repairing my ceramics is:
> - Fireproof Glue DA157
> Maximum Temp: 1260 C.
>I get this in a shop which is specialised in ceramics. It works great, when
I
>glue the pieces I can glaze it when the glue is dry and then have it stoked.
>
>Success, Frida Robben, The Netherlands.

Does anyone (Russell Fouts, for instance) have any more info on it? Is it
different than firebrick mortar (Sairset, or whatever)? Who sells it? Etc.

Richard Burkett -
School of Art, Design, & Art History, SDSU, San Diego, CA 92182
E-mail: richard.burkett@sdsu.edu <-> Voice mail: (619) 594-6201

c. van riemsdijk on thu 25 apr 96

I am unfamiliar with Sariset, or any of the other american brands, but it is
definately not mortar.
it is a whitish, gooie substance that will dry out of not careful, but can be
mixed back to life with a little water.
From what I have heard, Amaco's Magic Mender works very well to.
Unfortunately it is discontinued. (dont know why.)
By the way, for glueing little bits of greenware, I use vinager.Works fine for
me.
For mending bisque I use powdered clay from the clay I used 50:50 Neph. syenite.
refire bisque.
Shows the least difference in body color. However does not glue.
Hope this helps

Carolien from Keramikos.(pottery supply shop in Haarlem, the Netherlands)

Dawne Fowkes on tue 7 may 96

Another mender to try is a product called QF-180 from Carborundum. We
used this where I was in Grad school and brought some with me when I came
to Finland. To repair greenware mix it with your dry clay body or with very
thick slurry. Use ground up bisque shards to repair bisque ware. Let it
dry and then you can carefully sand off any excess. The repaired joint is
usually very strong after firing. It's terrific for those pieces that
you've been working for ever on and don't want to trash.


Dawne Jenelle Fowkes
Univ. of Art and Design Helsinki
(where spring is just on the barely here)

On Thu, 25 Apr 1996, c. van riemsdijk wrote:

> ----------------------------Original message----------------------------
> I am unfamiliar with Sariset, or any of the other american brands, but it is
> definately not mortar.
> it is a whitish, gooie substance that will dry out of not careful, but can be
> mixed back to life with a little water.
> >From what I have heard, Amaco's Magic Mender works very well to.
> Unfortunately it is discontinued. (dont know why.)
> By the way, for glueing little bits of greenware, I use vinager.Works fine for
> me.
> For mending bisque I use powdered clay from the clay I used 50:50 Neph. syenit
> refire bisque.
> Shows the least difference in body color. However does not glue.
> Hope this helps
>
> Carolien from Keramikos.(pottery supply shop in Haarlem, the Netherlands)
>

Lisa Skeen on tue 7 may 96

Where is the QF stuff available?


Lisa

Dawne Fowkes on wed 8 may 96

Lisa,
QF 180 is available through a company called Carborundum, I think and
they may be located in New York? I'm not sure as I got my supply when I
was in grad school.

Dawne Jenelle Fowkes
UIAH