katie rose on wed 27 mar 96
clayart folks,
i am posting this notice for a friend who is not yet on line.
FOR SALE: paragon TNF-28-3 kiln. approximately 6 years old and in excellent
condition. fires to cone 8, full range touch-and-fire computer control, 3"
brick throughout for economy. 10.4 cu ft capacity, excellent for larger
pieces. asking $800. one inch shelves available.
anyone who is interested or has questions, please call wayne directly. his
phone no is (520) 639-3220 (arizona)
katie rose
***********************
katie rose
raven@sedona.net
"Love is the reflection of God's unity in the world of duality. It
constitutes the entire significance of creation." (Meher Baba)
John G Haddad III on tue 30 apr 96
Olympic Oval with Orton kiln vent. 11 complete sets of shelves
and ample kiln furniture. Cone 10. Incredibly clean and in
good condition. Serious inquiries only to:
jghaddad@vm.temple.edu
Hendriks; Eleanor D. on wed 1 may 96
Dear John, (I have always wanted to begin a letter in this way :-))
Where is this kiln for sale located?!
Thanks,
Eleanor Hendriks, Fergus, Ontario
On Tue, 30 Apr 1996, John G Haddad III wrote:
> ----------------------------Original message----------------------------
> Olympic Oval with Orton kiln vent. 11 complete sets of shelves
> and ample kiln furniture. Cone 10. Incredibly clean and in
> good condition. Serious inquiries only to:
>
> jghaddad@vm.temple.edu
>
WMNSWK5@aol.com on sun 5 may 96
This is a serious inquiry. I live in SC and am just starting up own studio
and exhibition space. How much and where. Why are you selling if you don't
mind me asking? Goingout of the business? Thanks, Suzanne at WMNSWK5
Suki Meyer on sun 25 aug 96
HEAR YE -- HEAR YE One Gas Kiln For Sale!!! 27 cu. ft.,
sprung-arch with blower, set for propane, custom stack, detailed
building plans plus video of construction of kiln. Specs. available
upon request at: claypot@freedomnet.com Kiln located just west of
Richmond,VA Suki Meyer
Arlene Cason on mon 9 sep 96
A potter has asked that I post a message to see if anyone might be
interested in the following: Barrel-shaped (28" dia. by 36" height)
expanded metal with fiber fax raku/cone 10 kiln. She says this is kiln only
and can be used for reduction. If you'll e-mail your phone no., I can pass
it on to her.
tom huber on tue 10 sep 96
hi i would like more info on the kiln tom huber 207 6467140 thanks
At 06:29 PM 9/9/96 EDT, you wrote:
>----------------------------Original message----------------------------
>A potter has asked that I post a message to see if anyone might be
>interested in the following: Barrel-shaped (28" dia. by 36" height)
>expanded metal with fiber fax raku/cone 10 kiln. She says this is kiln only
>and can be used for reduction. If you'll e-mail your phone no., I can pass
>it on to her.
>
>
Barnstudio Howard on mon 16 sep 96
Where are you at? I mean where's the kiln located at?
Earl
Lynn Zimmer on sat 30 nov 96
" Carol Suzanne" Ceramic
fiber kiln for sale. 8 cu ft, gas, 8 burners, 340,000 BTU, Max. firing
temp. 2340F, waist high double doors. Once converted to an electric
kiln..the elements and wiring remain intact. Included are the switchbox,
kiln sitter, electronic soaker & wiring. As an electric kiln it drew 88
amps/230 volts/single phase on HI. The asking price of $1,300 includes
shelves, posts and DELIVERY! [San Diego area only] For more information call Nan
Lynn Zimmer on sun 1 dec 96
" Carol Suzanne" Ceramic
fiber kiln for sale. 8 cu ft, gas, 8 burners, 340,000 BTU, Max. firing
temp. 2340F, waist high double doors. Once converted to an electric
kiln..the elements and wiring remain intact. Included are the switchbox,
kiln sitter, electronic soaker & wiring. As an electric kiln it drew 88
amps/230 volts/single phase on HI. The asking price of $1,300 includes
shelves, posts and DELIVERY! [San Diego area only] For more information
call Nancy at voice mail 685-5588."
Nancy Utterback on fri 17 oct 97
I have a small updraft, natural gas kiln for sale. It has approx 11 cubic
feet of firing space, four burners, some shelves, posts etc. I am asking
$1200.00 for it. It is soft brick construction and movable is a small truck
in one piece. I have had if for a long time but started doing salt firing so
I havn't used it for four or more years. It fires great, good control and
easy reduction, can be fired on household pressure. Anyway, if anyone is
interested or needs more information let me know. I am near Boulder,
Colorado.
Thanks Nancy Utterback
carrie jacobson on sun 19 apr 98
Hi folks, the Stonington, Conn., pottery where I am taking classes has a
small kiln for sale. It is a Skutt model 181, probably about 5 cubic feet.
It stands maybe 3 feet high on its stand, and is perhaps 18 inches across.
It has a maximum fire temperature of cone 6, but is not firing to that
level, as the elements need to be replaced. Also, there is no furniture, no
shelves, you know, it's just an empty kiln.
But it's for sale for $75.
Call Mary Sanford at the Stonington Community Center, 860-535-2476, if you
want it.
Cheers!
Carrie Jacobson
Carrie Jacobson
Pawcatuck, CT
mailto:jacobson@brainiac.com
jo ohara on mon 11 may 98
Hello all,
Due to a electrical blunder on my part I unfortunately have my brand new CONEAR
^10..10cu foot kiln for sale.
shelves and supports also available. Would prefer to sell all together.
I live outside Coombs on Vancouver Island..
please feel free to enquire.
TIA
jo ohara
1 250 752 3797
or email johara@island.net
jjcat on wed 20 may 98
Check out our web site for pre-owned equipment....http://www.kilnray.com
We can post your equipment on our web page.
Fax us your equipment information and a few words about the condition and
acessories. Please include state or city & country
914-986-1808
thank you
carrie or peter jacobson on wed 16 dec 98
A guy called me the other day with a kiln for sale. It is a big Skutt, he
says, model 1027-240, looks like a ^6??, from what he read to me, max temp
2350.
I have NOT seen this kiln, I can NOT vouch for it, but the guy says it is
in fine shape, though he doesn't know much about kilns.
It was given to him for something or other, and whatever it was he wanted
to do with it didn't work out, and he's an older guy and at any rate, he
wants to sell it for $650.
I do not know if he will move on the price.
At any rate, you can call him -- his name is Frank DiRoma, and he is in
Westerly, R.I. -- at 401-596-1782. He is home from work this week, and is
happy to talk to anyone about this, he told me.
Cheers,
Carrie
Carrie Jacobson
Pawcatuck, CT
mailto:jacobson@brainiac.com
MRABoysen on sat 30 jan 99
kiln for sale. Never used AIM top loading (yes, there is such a thing, it =
looks
and is loaded just like an electric kiln but has gas jets at the bottom) gas
kiln. Bought from Bailey but has never been connected. Has all
furniture,paperwork etc..
Large size , approximately 23x29 in deep. Located near Washington D.C.
original cost =242,4000plus furniture all of .it now priced at =
=242,000.00.
call -540-554-2554 Puddleduck Farm Pottery, buyers only.
Dr.Tom Roess on sun 14 feb 99
------------------
Skutt kiln for sale in Colorado, Aspen area.. Perfect condition. Never
used. Automatic Model KM-1027-3. 240 V, single phase Goes to Cone 10.
Three inch brick means more efficiency. =241400. includes Kiln Furniture
Kit. 8 half shelves, set of 36 stilts, six each of 1 to six inches. Pick
it up and save shipping charges. Contact me via e-Mail or call me at 970
927-3051.
Carol Durnford on fri 19 feb 99
>----------------------------Original message----------------------------
>------------------
>Skutt kiln for sale in Colorado, Aspen area.. Perfect condition. Never
>used. Automatic Model KM-1027-3. 240 V, single phase Goes to Cone 10.
>Three inch brick means more efficiency. $1400. includes Kiln Furniture
>Kit. 8 half shelves, set of 36 stilts, six each of 1 to six inches. Pick
>it up and save shipping charges. Contact me via e-Mail or call me at 970
>927-3051.
>
>Have you sold your kiln yet? I live in Missoula Montana and am interested.
Do you have a controller or does it have onloy a kiln sitter. I'm
rechecking my catalogues to see if this was the kiln I had looked at
purchasing earlier at the Bray Foundation and if it would be cost effective
for me to travel that far to pick it up.
Sincerely Dave Durnford
Snowdrop@mssl.uswest.net
Lily on sat 17 apr 99
Hi all.
I have a friend who is not on e-mail and would like to sell his kiln and has
asked me to post this. Here are the facts:
Location: Portland, Oregon
Type of Kiln: Skutt Electric Automatic Kiln, Model KM1227
Included: Some kiln furniture, envirovent.
Conditon: Fours years old and in good condition. Has only been fired to =
cone
03.
Price: =241200.00
If interested please contact him at area code (503) 261-2922. Anyone who
answers the phone can help you.
This is all I know so please contact him if you have questions.
Thank you
Lydia in Portland Oregon and enjoying a beautiful sunny day.
mary ann on thu 29 apr 99
Coneart oval, 72 amp, single phase, 13 cu. ft., 7 yrs. old in excellent
condition. Includes kiln sitter, Sigma programmable controller, kiln
furniture. Rated for ^10. Originally $4500. $2500 or best offer.
Mary Ann Bowman
Ithaca, NY
maryannb@lightlink.com
Jonathan Kaplan on wed 5 may 99
I have the following kiln for sale:
Paragon TnF-28-3(slightly under 10 cu ft)with new heavy duty elements
(requires 90 amp breaker), DTC 600 controller
Includes Orton Kiln Vent, shelves, some props. Also 1/4" steel plate to
support the kiln on top of the stand/vent.
Kiln is in excellent shape, the usual wear and tear. It fires even, fast,
and it can be yours, FOB Steamboat Springs CO
Post me off the list for the price and more details.
Jonathan
Jonathan Kaplan, president
Ceramic Design Group LTd/Production Services
PO Box 775112
Steamboat Springs, CO 80477
(970) 879-9139 voice and fax
http://www.sni.net/ceramicdesign
James Bonnefond on wed 21 jul 99
Hi,
I am selling a Cone Art (4236-10)Kiln with an Orton Autofire Plus
controller. Also, 5 layers of shelves with 36-6" and 24-8" spuare
posts, 125 amp breaker w/40 ft. wire and pvc conduit. Kiln was used for
8 months. $2750.00 Email or phone (615) 673-9929
Jim
Susan Park on thu 22 jul 99
Where are you (and your kiln) located?
James Bonnefond on tue 27 jul 99
> I am selling a Cone Art Electric Kiln (22 cu. ft., 100 amp) with an Orton
> Autofire Plus
> controller. Also, 5 layers of shelves with 36-6" and 24-8" spuare
> posts, 125 amp breaker w/40 ft. wire and pvc conduit. Used for
> 8 months. $2750.00 Email or phone (615) 673-9929
>
> Jim Bonnefond
Joy Friedman on fri 30 jul 99
Hi Jim,
could you tell me how many cubic feet the kiln has? also where do you
live? I'm interested in it.
Thanks
Joy
Marg Waller on wed 15 sep 99
Greetings:
I have a Kiln ( Econo K 230) for sale in Southwestern
Ontario. For more info contact me off list at: mmm@cyg.net or
1-519-271-4420 or 1-519-271-2504
"You can take a horticulture but you can't make her think."
Dorothy Parker
James Bonnefond on sat 2 oct 99
> Cone Art Electric Kiln (22 cu. ft., 100 amp) with an Orton Autofire Plus
> controller, 5 layers of shelves with 36-6" and 24-8" square posts, 125 amp
> breaker w/40 ft. wire and pvc conduit. Used for 8 months. $2500.00 Email
> or phone (615) 673-9929
>
> Jim Bonnefond
jjcat on mon 21 feb 00
Memembers,
CONEART Kiln, oval model UW3627D-1-240V
Dual thermocouple UniTemp control, double wall, 12 cubic feet, infinite
switches, 1 phase, 240 volt, 63 amps, cone 10. With counterweight lid
assembly. New, still in original carton, $1,950.00.
Shipping included, anywhere in the U.S.
If interested e-mail to; jjcat@warwick.net
Thank you
Andrew Francis on sun 20 aug 00
I am selling a gas kiln, round (approx 18 cu') with a three burner setup
below with bottleneck burners (not standard venturis) - and is set to
fire on Natural gas. Includes baso style safety shutoff, individual
burner valves, a main valve and a ribbon style pilot/warmup system (like
a small oven burner). The kiln is in Very very good condition. I
believe that it is made by Alpine. The kiln has 3 inches of softbrick,
three rings, and separate bottom and hinged top.
Make offers - the burner system alone is very nice and could be used for
other kilns of approximately the same size. You pick up in Western MA
- 10 minutes from I-90 and the NY border, 50 minutes from Pioneer
Valley.
Thanks, and hope this'll work out for someone - our kiln pad is not big
enough for another kiln!! Please Email me directly -
afrancis@student.umass.edu
Andrew Francis
The Interlaken School of Art
413 298-5252
Morgan Britt on wed 10 jan 01
Skutt KM714 Kiln with electronic controller and full Bailey venting
system. Has only been fired 4 times. Fires to ^8. Paid $1365.00 plus
tax. Will sell for $1000.00 o/b/o. Located in the Sacramento area,
Northern California. For more info contact Morgan Britt (916) 988-9330
or email mbritt@jps.net.
Jeff Lawrence on sun 13 may 01
Hello Clayart,
I am putting together a pdf brochure with digital images on the kiln =
described below -- please drop me an email if you would like to receive =
the brochure.
Jeff Lawrence
jml@cybermesa.com
Kiln for sale: 80 usable cubic foot, natural-gas forced air fired =
downdraft kiln constructed of angle-iron frame supporting 2800 IFB floor =
and 8 inch ceramic fiber walls and top. Firing chamber is 64" long X 56" =
wide X 60" tall, and the setting footprint is six 20"X20" shelves (about =
30 used shelves and furniture included).
Forced-air burners are from Ward Burner Company, fitted with small pilot =
burners that also serve as candling burners (reach 300-400F in the =
morning after candling all night). The fuel (natural gas) is metered by =
an orifice valve for precise duplicability from firing to firing (screw =
valve goes from 0-max over sixteen revolutions). The ITC-100 coating on =
the interior surface of the fiber turned orange-tan after the first =
firing and looks unchanged now after 280 firings. The coating is crisp =
and the interior does not generate fiber dust.
Price: $9875, ($2,000 less than cost of materials).=20
Location: Espanola, New Mexico (20 miles north of Santa Fe, New Mexico)
Portability: My Texan engineer buddy who did the welding says "we could =
move it in a minute". With care, a forklift and a 16 foot lowboy flatbed =
trailer, I think he's right.=20
Other notes:
I posted the plans I used on www.digitalfire.com if you'd like to see =
how much work you would save by buying this one already put together. =
The design is the downdraft design from Nils Lou's book, "The Art of =
Firing," with two basic differences:
- I built an angle-iron frame that raises the whole firing chamber above =
the ground (better insulation and portability as a result)
- The four sides and top are single angle-iron framed units of 8" =
compressed fiber (monolithic fiber modules) that are welded to the =
frame. This means that there are only four interior joints to tend to as =
the fiber shrinks -- three around the top and three around the bottom. =
This compares favorably to the popular 12X12 fiber modules, where all =
the joints tend to grow as the fiber shrinks.
The fiber is very energy efficient -- it costs me $11-15 to fire to cone =
04, and $18-30 to fire to cone 6, depending on how long I soak, level of =
reduction, etc. The floor is 2800 IFB. I have records of 280 firings -- =
mostly cone 04 bisque, with some cone 6 reduction.
I fired to cone 10 a few times, and never had any problem getting to =
temperature, but my clay couldn't handle it and I didn't want to change =
bodies.
Problems:
- Needs a clamp on the top of the door (been using a wood-worker's clamp =
for the last two years and never took the next step)
- Needs a new side clamp (on hand) re-tapped=20
- The flue I built (9X9 interior) has always sucked too hard. Also, it =
means that the majority of damper control happens in the last two inches =
of insertion (thanks to Dave Finkelnburg for that insight). The flue is =
fire-clay mortared together and would have be dismantled anyway to move. =
I'd recommend building the fluebox with the hardbrick and going the =
route recommended on clayart of using smaller-bore fiberboard cylinders =
as a future flue.
- The brick in the flame paths is showing some wear -- I've given it a =
few coats of ITC 100 to cover the iron age-spotting.=20
- Early on, before I lined the flue opening, the stainless steel framing =
in the flue opening in the modules buckled a bit. Not an issue now.
- Firing caveat: go easy on the gas -- since getting the metering gas =
valve, I've seldom used even half the gas pressure (7 water column =
inches coming in). The burners give you enough power (500,000 each) to =
get as hot as you want as fast as you want, but usually at the cost of =
evenness and quality of ware. Slower usually means a better firing.
ILENE MAHLER on wed 6 jun 01
Is anyone interested in an old gare kiln? It is 220 volts 60 amp 1
phase.It is in working condition .I need a fast firing slow cooling kiln
for crystal firings have a new (9 firings) digital controller $650(
paragon 1000 with the Kiln I am asking $850. That is $600 for controller
and $250 for kiln to be sold together.It fires to cone 10 I have used it
mostly for bisque and cone 6,and since March for crystals am in West
Hartford Conn. you can call me at 860-232-9051 or e-mail me off list at
imahler@home.com...Thanks Ilene
ILENE MAHLER on fri 8 jun 01
Gare 2327.. 23x 27(inside width and depth)220/240 volts 45 amps with a
pug (doesn't need to be direct wired) in working condition..Will fire to
cone 10..Also available is the paragon digital controller 1000.Kiln
asking price is $350 controller is $600 fired 9xs Together I want
$850.It isn't good for crystals as you really need 3 inch brick..e-mail
me.. imahler@home.com or call 860-232-9051 in Conn..Thanks.. Ilene... oh
if the nice young man who bought the clay will be in my area I have some
colored clay and blocks of color and more dried glaze for him.I never
kept his name & # etc...
Andie Carpenter on fri 8 jun 01
Where is the kiln?
ILENE MAHLER wrote:
> Gare 2327.. 23x 27(inside width and depth)220/240 volts 45 amps with a
> pug (doesn't need to be direct wired) in working condition..Will fire to
> cone 10..Also available is the paragon digital controller 1000.Kiln
> asking price is $350 controller is $600 fired 9xs Together I want
> $850.It isn't good for crystals as you really need 3 inch brick..e-mail
> me.. imahler@home.com or call 860-232-9051 in Conn..Thanks.. Ilene... oh
> if the nice young man who bought the clay will be in my area I have some
> colored clay and blocks of color and more dried glaze for him.I never
> kept his name & # etc...
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
Tracy Wilson on wed 22 aug 01
CLAYART Digest - 20 Aug 2001 to 21 Aug 2001 (#2001-233)Howdy all,
I've got a 40 cu ft.(34 or so loading space) sprung arch, down draft car =
kiln for sale with all the fixins' It's got 4 venturi B-4a burners. =
It's dry laid but the door is mortared so you'd want a flat bed type =
trailer to move it.
It's ready for a rebuild and I decided to buy a ready built kiln =
instead. I've got a few more firings scheduled for it but It'll need to =
be out of here sometime the last three weeks of Oct.
Email me personally (or call the studio) if you're interested and I'll =
give you any more info you'd like.
Thanks,
Tracy
________________________________
Tracy Wilson
Saltbox Pottery
4 Shaw Rd.
Woolwich, ME 04579
Phone: 207-443-5586
Out of State: 1-800-755-7687 (POTS)
Email: Tracy@saltboxpottery.com
Web: www.saltboxpottery.com
________________________________
Neil Fallon on sun 26 aug 01
How much are you asking for the kiln?
Jessica Gitlis on wed 29 aug 01
SKUTT AUTOMATIC 1227, single phase, 240 volt, 3 years old -$1200, for =
sale from the University of Maryland, Art and Learning Center. Call =
Alicia Simon @ 301-314-2787 for details.
Tracy Wilson on sat 1 sep 01
I've got a 40 cu ft.(34 or so loading space) sprung arch, down draft car =
kiln for sale with all the fixins' It's got 4 venturi B-4a burners. =
It's dry laid and the frame is bolted together so it's easy to =
disassemble. The door is mortared so you'd want a flat bed type trailer =
to move it
It's ready for a rebuild and I decided to buy a ready-built kiln =
instead. I've got a few more firings scheduled for it but It'll need to =
be out of here sometime the last three weeks of Oct.
First $2500 takes it and that includes a bunch of stilts and 28 good =
alumina shelves (12 x 24) and about 12 not-so-good but useable shelves =
some alumina and some silicon carbide (same size)
Email me personally (or call the studio) if you're interested and I'll =
give you any more info you'd like. =20
__________________________
Tracy Wilson
Saltbox Pottery
4 Shaw Rd.
Woolwich, ME 04579
Maine: 1-207-443-5586
Out of State: 1-800-755-POTS (7687)
Email: tracy@saltboxpottery.com
Web: www.saltboxpottery.com
_____________________________
mark davis on wed 5 sep 01
I am trying to sell my gas downdraft kiln. It is a 22 cu. ft. Olympic =
downdraft, fiber-lined model. It has 6 burners and is rated for 360,000 =
b.t.u.'s per hour. shelves included.
Memphis, TN. area. $2750
Contact me at alsih2o@bellsouth.net
Tracy Wilson on sun 30 sep 01
40 cu ft.(34 or so loading space) sprung arch, down draft car kiln for =
sale Includes shelves and furniture It's got 4 venturi B-4a burners. =
It's dry laid but the door is mortared. The entire kiln frame bolts =
together. Asking $2500. =20
It's ready for a rebuild and I decided to buy a ready built kiln =
instead. I've got a few more firings scheduled for it but It'll need to =
be out of here sometime the end of Oct. or so.
Email me personally (or call the studio) if you're interested and I'll =
give you any more info you'd like.
Thanks,
Tracy
__________________________
Tracy Wilson
Saltbox Pottery
4 Shaw Rd.
Woolwich, ME 04579
Maine: 1-207-443-5586
Out of State: 1-800-755-POTS (7687)
Email: tracy@saltboxpottery.com
Web: www.saltboxpottery.com
_____________________________
Nick Zappa on sat 6 oct 01
We have a 20 cubic foot stackable gas kiln for sale. It is fiber, =
encased in a metal framework (similar to geil, bailey ) it has an =
attached hinged door. It is a downdraft with 6 atmospheric burners. =
Fires to cone 10 in 6-8 hours depending on how fast you want to go.=20
The outside dimensions are 53" wide x 59" long including the stack =
(stack is 18" x 18") the height is a total of 68" tall that includes 12" =
legs. The inside is 38" wide x 34" long x 42" tall. The burner system is =
underneath so no bagwall is needed. Further questions please call or =
e-mail off list. $2500.00 we do have some shelves that are included. =
Nick Zappa=20
Zappa Pottery & Gallery Inc.
18800 P-61 Trail
Montrose CO. 81401
www.zappapottery.com
info@zappapottery.com*******
970.249.6819 Studio
970.252.0303 Gallery
970.252.0104 Fax
877.504.6819 Toll Free*********
Ron Collins on mon 22 oct 01
I have an Olympic kiln for sale. It is located 90 miles east of Dallas =
in Henderson, Texas. It is :
Olympic model 2827H rated to cone 10. It has about 6 or seven good half =
shelves, and has been stored for over three years. It is about 11 years =
old, but I did not use it much-I don't think that it has had fifty =
firings total, and never to cone 10, just to cone 6. The kiln was in =
perfect shape when I stored it three years ago. It is at my mother's =
house, she would like me to do something with it, and I can't bring it =
down here. I am asking $550, which I think is a good deal for kiln and =
shelves. It really is in excellent shape. Melinda Collins, Antigua, =
Guatemala
Lesley Alexander on tue 8 jan 02
Santa Barbara, CA... a friend with a home-built small downdraft kiln
would like to sell it. Any somewhat local interest? Lesley,
celadon@silcom.com
ROGER CLARK on fri 11 jan 02
I posted this kiln back in Nov. for sale, but no one has taken it home =
with them yet. It is a Duncan DK1029-1 with a Dawson Kiln Sitter. It is =
in good condition. Was firing once or twice a month with this kiln. I =
just recently purchased a new digital kiln and don't need this one =
anymore. Asking price is $550.00 obo. Contact me for further questions =
or phone me at 573-624-8535. I live in Southeast Missouri. Will need to =
be picked up.
Thanks,
Tammy Clark=20
Paul Bailey / Janet Moe on fri 11 jan 02
I have a full set of elements (brand new, still in packages) for this kiln (DK 1029/ DK 1020). I bought them and then decided to buy a new kiln and convert the Duncan to a raku kiln. If anyone is interested contact me and we can talk, trade and/or cash. Janet
ROGER CLARK wrote:
> I posted this kiln back in Nov. for sale, but no one has taken it home with them yet. It is a Duncan DK1029-1 with a Dawson Kiln Sitter. It is in good condition. Was firing once or twice a month with this kiln. I just recently purchased a new digital kiln and don't need this one anymore. Asking price is $550.00 obo. Contact me for further questions or phone me at 573-624-8535. I live in Southeast Missouri. Will need to be picked up.
> Thanks,
> Tammy Clark
>
Gargiulo, Tony on mon 14 jan 02
Dan,
How are u. Sorry I haven't gotten by there, but just now getting over this
cold.
What do you think about this kiln? Is it any good? Do you have a picture of
it?
Hope all is well
Tony
-----Original Message-----
From: ROGER CLARK [mailto:crpotts@BOOTHEEL.NET]
Sent: Friday, January 11, 2002 2:31 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: Kiln For Sale
I posted this kiln back in Nov. for sale, but no one has taken it home with
them yet. It is a Duncan DK1029-1 with a Dawson Kiln Sitter. It is in good
condition. Was firing once or twice a month with this kiln. I just recently
purchased a new digital kiln and don't need this one anymore. Asking price
is $550.00 obo. Contact me for further questions or phone me at
573-624-8535. I live in Southeast Missouri. Will need to be picked up.
Thanks,
Tammy Clark
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
dan mc kinnon on tue 15 jan 02
tony, don't have a clue what it is or looks like, just
saw the posting in clayart and thought you might be
interested.... will try to back with you tomorrow when
i have more time .. later ... dan
--- "Gargiulo, Tony" wrote:
> Dan,
> How are u. Sorry I haven't gotten by there, but just
> now getting over this
> cold.
> What do you think about this kiln? Is it any good?
> Do you have a picture of
> it?
> Hope all is well
> Tony
>
> -----Original Message-----
> From: ROGER CLARK [mailto:crpotts@BOOTHEEL.NET]
> Sent: Friday, January 11, 2002 2:31 PM
> To: CLAYART@LSV.CERAMICS.ORG
> Subject: Kiln For Sale
>
>
> I posted this kiln back in Nov. for sale, but no one
> has taken it home with
> them yet. It is a Duncan DK1029-1 with a Dawson Kiln
> Sitter. It is in good
> condition. Was firing once or twice a month with
> this kiln. I just recently
> purchased a new digital kiln and don't need this one
> anymore. Asking price
> is $550.00 obo. Contact me for further questions or
> phone me at
> 573-624-8535. I live in Southeast Missouri. Will
> need to be picked up.
> Thanks,
> Tammy Clark
>
>
____________________________________________________________________________
> __
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at
> melpots@pclink.com.
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/
Taylor on thu 21 mar 02
I have a 10 cu. ft. Olympic model 2827H electric kiln for sale. I =
bought it in 1992 and the last time it was fired was November of 2000. =
It's in excellent shape and has been well maintained. It is equipped =
with a Skutt kiln-sitter and timer. Asking $1500 Cdn FOB my studio here =
in Medicine Hat, Alberta.=20
Dan Taylor
Dan Taylor Pottery
403-527-1002
If you don't have a pot to...visit www.dantaylorpottery.com :-}
Thought for the day:
" When you decide to play it safe in life you are deciding not to grow."
=20
Julie Ann Bouche'-Forbes on wed 30 oct 02
I have a beautiful Skutt KS-1027 kiln, with Envirovent (still in the box)
and box full of kiln furniture for sale. The kiln is three years old but
has never been fired. Actually, it's never even been plugged in. The first
year I had it, it sat in its crate until the kiln room was finished. Since
then its been sitting in the corner, covered with furniture moving
blankets. It is, as you can imagine, in perfect condition. My health
prompts this sale. New would cost $2,050. I'm asking $1,500. I'm located
near Salem, Oregon. Please e-mail me directly with any questions you might
have. Thanks.
=====
Julie Bouche'-Forbes
Dallas, Oregon
saltcreekart@yahoo.com
__________________________________________________
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/
Sheila Tarshis on thu 7 nov 02
Cress: Model FTX 28SP cone 10 Serial # 9105
240 volts 55 amps 10 cubic feet
Interior dimensions?: 28" wide x 27" deep
Firemate Kiln Sitter
New Elements/ New switches
Only fired low-fire, cone 03
NE Ohio
$1300.00 OBO
Julie Ann Bouche'-Forbes on wed 15 jan 03
Help, I still have my Skutt KS-1018 for sale. The Envirovent and kiln
furniture kit are still in their original boxes. It has a kilnsitter; no
electronic controller. Never fired, perfect condition. Health and changing
lifestyle forces sale. Asking $1,350, retails for over $1,870. I'm located
near Salem, Oregon. If you're not too far away, we can talk about
delivery. Contact me at saltcreekart@yahoo.com.
=====
Julie Bouche'-Forbes
Dallas, Oregon
saltcreekart@yahoo.com
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Lee Burningham (Box Elder High School) on thu 23 jan 03
Howdy,
A hobby potter here in town has decided to give up the hobby and move
south in search of warmer winters. We just bought the two kilns they
had. Sorry it didn't work out for the kiln you were/are selling. Good
luck,
Lee Burningham
Cindy Gatto on sat 25 jan 03
Hello All:
We have a 7 cubic foot L&L J230 kiln for sale. The kiln is in
excellent shape. We need to make room for the new oval. Anyone interested
please contact Cindy or Mark at The Mudpit either 718-218-9424.
Thank you:
Cindy & Mark
The Mudpit
228 Manhattan Ave
Brooklyn NY 11206
718-218-9424
mudpitnyc@aol.com
www.mudpitnyc.com
Marg on fri 14 feb 03
Hi Everyone,
Must sell my Euclid kiln R-85. It is 3 years old, has new elements and in
mint condition.
Volume is 3.3 cu.ft., octagonal, 17.5 in. wide, height 22.5 in.
Included is a Dawson LT-KR2 sitter. It has a delayed start-up feature
which enables one to take advantage of "off peak" electric rates.
Also included are shelves and posts.
This kiln is selling for $850. Canadian or U.S. $550.
Original cost over $1400.00
No shipping.
For more info please contact me off list at: mmw@sympatico .ca
I am located between Windsor and Toronto.
Marg
(519) 271-2504
Marsh Pottery on mon 28 apr 03
Hi Mel,
> > I no longer receive ClayArts e-mails - too many e's and not enough
> > time. But I still refer to it when I need answers. It's a great
> > service.
> > May I please list a kiln for sale on ClayArts?
> >
> > It is in good condition, but it is one kiln too mnay (I have 4).
> >
> > Paragon TNF-82 with Computerized Controller
> > 8 yrs old. In good condition
> > 17.5" w x 22 1/4 " d inside
> > 220V, 30 Amps, Cone 8
> > New elements and thermocouple
> > Some furniture, stand
> > $650 or best offer
> > Pick up only in east central Florida
> >
> > Please e-mail me at
> >
> > marshpots@juno.com
> >
> > Thank you.
> >
> > Marsha Koenig
> >
> > Come see what I do!
> > Marsh Pottery Studio
> > http://www.marshpottery.com
> >
> >
> >
Suzanne Conine on mon 5 may 03
Kiln for sale. Paragon, 240 volt, cone 10, three months old. Includes wall =
mount Touch n Fire kiln controller. The facility here at this school only =
has 208 volts so the kiln must be replaced. Great deal. Worth $2000 for =
sale for $1500. Salt Lake City Utah area. Email at =
suzanne.conine@waterfordschool.org.
*************************************
This e-mail may contain privileged or confidential material intended for =
the named recipient only.
If you are not the named recipient, delete this message and all =
attachments.
Unauthorized reviewing, copying, printing, disclosing, or otherwise using =
information in this e-mail is prohibited.
We reserve the right to monitor e-mail sent through our network.=20
*************************************
claystuff on mon 2 jun 03
I have a small electric kiln for sale in New Jersey, outside of
Philadelphia.
Inside measures 20" by 17".
I fire to Cone 06 but it can go to Cone 5. No known make or model number.
New wiring and switches. Asking $350.
Email off list to claystuff@comcast.net
Ingeborg Foco on mon 30 jun 03
A friend whose mother recently died is wanting to sell her kiln and has
asked me to post it to the list.
L & L Kiln
J series Manual with Dawson sitter & timer
Sectional Model 1X18
Model P
3 sections with stand.
Kiln comes with tools and clay asking $900
Please contact Brenda Vititoe
239 -481-4970 Fort Myers Florida
At this time I am NO MAIL so please contact Brenda Directly.
Ingeborg
the Potter's Workshop & Gallery
P.O. Box 510
3058 Stringfellow Road
St. James City, Florida 33956
239-283-2775
Fabienne Micheline Cassman on mon 28 jul 03
Skutt Electric Kiln
Model 818-240 1-Phase 26.7A
10 Total Firings
Includes Shelves and Posts
A friend who is not on the list ask me to post this. I am not sure if it has an extension ring or not; I'm having a hard time figuring out the note. You may contact me off-list for more information.
Fabienne (hibernating)
PS I check my e-mail twice a week lately, so don't be surprised if you do not ear back from me right away.
--
Fabienne Cassman http://www.milkywayceramics.com/
WARNING: I cannot be held responsible for the above
because my cats have apparently learned to type.
_,'| _.-''``-...___..--';)
/_ \'. __..-' , ,--...--'''
<\ .`--''' ` /'
`-';' ; ; ;
__...--'' ___...--_..' .;.'
(,__....----''' (,..--''
--
Bonnie Staffel on wed 13 aug 03
Dear Clayarters,
I am moving my studio closer to my home and need to sell my large Cone 10
L&L Kiln. I will be having chemicals for sale also a little later. The
kiln is easily moved but will have to be dismantled and picked up by the
purchaser. Remember, it has been "driven" by a little old lady and does not
have a lot of miles on it. It has served me well in firing my
production work as well as my big pieces. I love the ramping aspect of the
Controller. You can access the information by clicking on
http://pws.chartermi.net/~bstaffel/kiln.htm
I am taking offers and would love to see it go to a happy potter's studio to
continue producing great pottery. I live in the Charlevoix, MI area. Any
questions, please call or email me.
Regards, Bonnie Staffel
http://pws.chartermi.net/~bstaffel/
Bonnie Staffel on thu 21 aug 03
Dear Clayarters,
Posting to let you know that I have a very nice large kiln for sale suitable
for sculpture or production or large pots. It can be seen on the attached
URL. I am changing to new directions in my work, going into pit firing and
low fire copper reduction work. It is time to follow my dreams to
concentrate on new work in this territory. I am interested in receiving an
offer. Pick up is from Charlevoix, MI. The kiln is an L&L DaVinci with a
Dynatrol controller and kiln sitter/w/Timer. New elements just installed
and new board put in Dynatrol. Goes to Cone 9 in 8 hours. Any offer
considered. I would like to move from my old studio by the end of
September.
Thanks for looking and hope you can use this wonderful kiln.
Bonnie Staffel of Charlevoix, MI.
> http://pws.chartermi.net/~bstaffel/kiln.htm
>
>
Jami Deem on fri 17 oct 03
I have a J230 L&L kiln for sale. It's 7 cu ft, older, and needs some work. I bought it from a college and haven't been able to use it because it needed to be hardwired. Now, I am moving to Alaska and it needs to find a new home. It will need some replacement brick and, not having fired it up, may need some other work but all parts are available through L&L. It is all manual.
I am in Freeport, Ohio (near Salt Fork Lake / Cambridge), and it will need to be picked up at my home (my husband has our truck already in Alaska). I am asking $500 but will consider any reasonable offer as it gets closer to moving day.
E-mail @ lufnoops@hotmail.com
home #740-922-5736
cell #740-517-0736
Jami Teets
Cheer a special someone with a fun Halloween eCard from American Greetings!
Laura Efthim on sat 3 jan 04
I have a friend in Northern Virginia selling a Cress kiln, model LT-3K. Email
him at beadshoppe2@msn.com if you're interested. Thanks.
Norma Sherwood on wed 3 mar 04
Cress kiln for sale, model 328J. Interior 18 by 15 inches, exterior 23 =
by 24. Stand included. For further information, write =
beadshoppe2@msn.com
Marcia Welenson on fri 23 apr 04
Paragon A28B6, 58, 28" interior diameter X 27" deep. Includes shelves, =
supports, kiln setter, Bailey 2 kiln venting system and steel stand with =
castors. Located in Bucks county PA.
Marcia Welenson
215/579-4146
lela martens on sun 30 may 04
Hello Clayarters,
I have a cone 6 electric Cress kiln for sale. Model B 23 H, volts 240 AC, 25
amps.
Cone sitter type, 2 dials.
I am in southern Alberta. If anyone fairly close by is interested, please
e-mail me privately.
Best wishes from Lela, where we are grateful for the rain that seems to like
spending weekends.
Those of us not working on clay projects are
watching the Calgary Flames
versus
the Florida Lighting hockey games
anyway....and even some who are!
Clayslinger on thu 10 jun 04
I have an Evenheat kiln with kilnsitter that I bought a year or so ago and
have never used. I was intending to rewire it and replace the sitter probe
but never got around to it. Now I need the space and figured someone might
as well use it! It was second hand to me and all I've done it pull the guts
out.
I am in London Ontario and am asking $250 Canadian for it. I will not ship -
sorry.
If you are interested I can send photos.
e-mail me at penelopepots(at)rogers.com (replace the word at with the @
sign!)
p.s. I have already had one interested party contact me from potterbarter so
if that deal falls through you are next in line
=o) =o) =o) =o) =o) =o) =o)
Penni Stoddart
Education Assistant - Literacy
Potter
I want to die like my grandmother did.
Quietly in her sleep........
not screaming in fear like her passengers!
claystuff on sun 24 oct 04
small used electric kiln for sale in southern NJ
Contact me direct at=20
claystuff@comcast.net
Debby
Donna Nicosia on mon 25 oct 04
Hi Debbie, What kind of kiln is it? And whereabouts in southern
jersey? Donna
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of claystuff
Sent: Sunday, October 24, 2004 9:45 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: kiln for sale
small used electric kiln for sale in southern NJ
Contact me direct at
claystuff@comcast.net
Debby
________________________________________________________________________
______
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.773 / Virus Database: 520 - Release Date: 10/5/2004
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.773 / Virus Database: 520 - Release Date: 10/5/2004
Andrew Hoffer on mon 8 nov 04
It's an AIM Hi-Temp kiln. Don't know exactly how old. Model number is
2327; 23" wide and 27" deep; 240 volts, 48 amps. It says it fires to
cone 10 although I have never fired it to make sure. Has a Dawson Kiln
Sitter. The inside and outside both are in excellent shape with no
large chips in the brick. I live in Cambridge, OH and will drive
within reason to help deliver. I'm asking $250.
Deeclay@AOL.COM on tue 9 nov 04
Skutt KM1227 9.92 cubic feet. 33H X 34W for sale only used once or twice
but must sell.
Paid $2493 but will consider anything $1500 or best offer.
Kiln is in Ft. Lauderdale, FL. You will have to pick it up sorry can't ship.
Please call Blair home 954-961-2876 or cell 754-294-6939 and mention you
heard about kiln from BCC (Broward Community College)
Thanks.
Diane in Sunny Miami
Andrew Hoffer on sun 14 nov 04
AIM kiln has been sold.
Harry Peery on thu 2 dec 04
This is a reposting:
Skutt KM1227 9.92 cubic feet. 33H X 34W for sale only used once or =
twice
but must sell.
Paid $2493 but will consider anything $1500 or best offer.
Kiln is in Ft. Lauderdale, FL. You will have to pick it up sorry can't =
ship.
Please call Blair home 954-961-2876 or cell 754-294-6939=20
Sue Peery
Harry Peery on tue 21 dec 04
Mark,
I was posting the ad for Blair and I don't know if it's been sold or not.
Please contact Blair directly at home 954-961-2876 or cell 754-294-6939.
Thanks,
Sue
(snip)
Have you sold it yet?
Mark Potter
Potter, Mark on tue 21 dec 04
Have you sold it yet?
Mark Potter
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Harry Peery
Sent: Thursday, December 02, 2004 7:03 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: Kiln for sale
This is a reposting:
Skutt KM1227 9.92 cubic feet. 33H X 34W for sale only used once or
twice
but must sell.
Paid $2493 but will consider anything $1500 or best offer.
Kiln is in Ft. Lauderdale, FL. You will have to pick it up sorry can't
ship.
Please call Blair home 954-961-2876 or cell 754-294-6939=20
Sue Peery
________________________________________________________________________
______
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
gillian evison on sat 19 feb 05
Hi Everone,
I have an electric kiln for sale in Vancouver, B.C.. It is an Olympic 2327H
- a sectional kiln - 7 cu.ft., and has been fired about 8 times ( or less).
It comes with a kiln sitter and some shelves.
I asked about the price for used kilns at my local pottery supply store and
they sold a used one of these a couple of years ago for $2200, so I am
asking $2000 - but will look at offers. No tax of course.
Email me at jillevison@hotmail.com or phone 604-926-2892
Thanks, Jill
JEFF OSBORNE on mon 2 may 05
kiln for sale
L&L JD2927 used very little over last couple years. has power vent on
bottom, 3" brick on sides, industrial thermocouplers, elements in bottom
of floor, control panel with all manuals for kiln. elements and couplers
are in great shape and fire like a champ. paid over 4000.00 new selling
for 2500.00 obo. if pics needed email me. single phase 220v 69 amps, 16000
watts.
jeff osborne
Cameron Covert on thu 5 may 05
Bailey Downdraft gas kiln for sale 24/16 in excellent condition. Approx 10
yrs old. Need to move soon to make room for new kiln.
First $2,500, you move. Located one hour west of Atlanta. Profclay@aol.com
770-832-9228
M Pepper on wed 8 jun 05
Donna,
I have someone that may buy this kiln tomorrow.They
are suppose to come and see it..but if they do not buy
it I will be glad to send you photos and manual link
online. I will let you know tomorrow evening.. thanks
for your interest....Michael
--- DandJT4ever@AOL.COM wrote:
> What are the diminsions of this Kiln. Do you have a
> picture you could send
> if it is still available.
> Please let me know.
>
> Thank you
> Donna Turnage
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
>
DandJT4ever@AOL.COM on wed 8 jun 05
What are the diminsions of this Kiln. Do you have a picture you could send
if it is still available.
Please let me know.
Thank you
Donna Turnage
M Pepper on thu 9 jun 05
Donna,
We sold the kiln today.. Thank you for your interest
anyway....As I said we would let you know something
today..Michael
--- DandJT4ever@AOL.COM wrote:
> What are the diminsions of this Kiln. Do you have a
> picture you could send
> if it is still available.
> Please let me know.
>
> Thank you
> Donna Turnage
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
>
Rogier Donker on fri 10 jun 05
One refurbished Amaco EC 55 school kiln. Top temp 2000.degrees
Fahrenheit....see picture on the website! Come and get it....I will not
ship!
Rogier
See us on the web at http://www.donkerstudio.org
cheryl buell on thu 30 mar 06
I have a KM1027 Skutt kiln for sale for $200.00.
It is in good condition but needs elements.
I will not ship...you have to be willing to come get it.
Anyone interested?
Cheryl
Nanci Mansfield on fri 31 mar 06
You neglected to tell us where it is. I might go to South Carolina but not to California. Definitely. Location is important here.
Nanci
cheryl buell wrote:
I have a KM1027 Skutt kiln for sale for $200.00.
It is in good condition but needs elements.
I will not ship...you have to be willing to come get it.
Anyone interested?
Cheryl
______________________________________________________________________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
---------------------------------
New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.
Eric Suchman on fri 31 mar 06
Willing to come and get it where????
On Mar 30, 2006, at 4:57 PM, cheryl buell wrote:
> I have a KM1027 Skutt kiln for sale for $200.00.
> It is in good condition but needs elements.
> I will not ship...you have to be willing to come get it.
> Anyone interested?
> Cheryl
>
> ______________________________________________________________________
> ________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
Cindy Gatto on fri 31 mar 06
Hi Cheryl Where are you located.
Cindy Gatto & Mark Petrin
The Mudpit
228 Manhattan Ave
Brooklyn, NY 11206
718-218-9424
_www.mudpitnyc.com_ (http://www.mudpitnyc.com/)
mudpitnyc@aol.com
Earl Brunner on fri 31 mar 06
So Cheryl, take a GOOD look at your message. Do you
see the problem?
Where the heck are you?
Earl Brunner
Las Vegas, NV
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On
Behalf Of cheryl buell
Sent: Thursday, March 30, 2006 4:58 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: Kiln for sale
I have a KM1027 Skutt kiln for sale for $200.00.
It is in good condition but needs elements.
I will not ship...you have to be willing to come get
it.
Anyone interested?
Cheryl
_______________________________________________________
cheryl buell on sat 1 apr 06
My apologizes for not including that very important piece of
information.
Northwest Arkansas.
Cheryl
On Mar 31, 2006, at 7:08 PM, Eric Suchman wrote:
> Willing to come and get it where????
>
>
>
> On Mar 30, 2006, at 4:57 PM, cheryl buell wrote:
>
>> I have a KM1027 Skutt kiln for sale for $200.00.
>> It is in good condition but needs elements.
>> I will not ship...you have to be willing to come get it.
>> Anyone interested?
>> Cheryl
>>
>> ______________________________________________________________________
>> ________
>> Send postings to clayart@lsv.ceramics.org
>>
>> You may look at the archives for the list or change your subscription
>> settings from http://www.ceramics.org/clayart/
>>
>> Moderator of the list is Mel Jacobson who may be reached at
>> melpots@pclink.com.
>
> _______________________________________________________________________
> _______
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
cheryl buell on sat 1 apr 06
Of course location is important.
I apologize for my oversight.
Sincerely,
Cheryl
On Mar 31, 2006, at 6:50 PM, Nanci Mansfield wrote:
> You neglected to tell us where it is. I might go to South Carolina but
> not to California. Definitely. Location is important here.
> Nanci
>
> cheryl buell wrote:
> I have a KM1027 Skutt kiln for sale for $200.00.
> It is in good condition but needs elements.
> I will not ship...you have to be willing to come get it.
> Anyone interested?
> Cheryl
>
> _______________________________________________________________________
> _______
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
>
>
> ---------------------------------
> New Yahoo! Messenger with Voice. Call regular phones from your PC and
> save big.
>
> _______________________________________________________________________
> _______
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
cheryl buell on sat 1 apr 06
Yes, my apologizes to all who read my post.
Sincerely,
Cheryl
On Mar 31, 2006, at 3:08 PM, Earl Brunner wrote:
> So Cheryl, take a GOOD look at your message. Do you
> see the problem?
>
>
>
>
> Where the heck are you?
>
> Earl Brunner
> Las Vegas, NV
> -----Original Message-----
> From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On
> Behalf Of cheryl buell
> Sent: Thursday, March 30, 2006 4:58 PM
> To: CLAYART@LSV.CERAMICS.ORG
> Subject: Kiln for sale
>
> I have a KM1027 Skutt kiln for sale for $200.00.
> It is in good condition but needs elements.
> I will not ship...you have to be willing to come get
> it.
> Anyone interested?
> Cheryl
>
> _______________________________________________________
>
> _______________________________________________________________________
> _______
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
Cook, Ron on tue 9 may 06
Cheryl,
Do you still have the Skutt 1027. I would be interested in more
information.
Ron D. Cook
217.316.6333
caterbeth on sat 17 jun 06
Hi Everyone,
I'm in the market for a kiln so I've been watching Ebay etc faithfully of
late. Due to it's size, I thought I'd pass the following ad along to
interested Chicago area ClayArters. It doesn't have a reserve so it might
be worth the "looksee." Sounds like its ^14 forced draft gas. Probably 16
cu ft. Wish I were within 1000 miles of this or I'd go get it myself.
Maybe someone here needs it. Here's the item number on Ebay: 104752433770
Best,
Beth Eisenberg-Schapera
(PS. This is NOT my kiln for sale and unfortunately, I don't know anything
about it.)
Alpine Gas fired Industrial Production Kiln
Model HF-16
Serial #1776
Exterior dimensions: 63" x 57" x 36" deep (not including hood)
Interior dimensions: 42" x 36" x 23 1/2" - 26"
2 electric blowers
Due to sale of house this kiln, which cost several thousand dollars, will be
sold with no reserve to the high bidder who can remove it by July 30th, 2006
from Evanston, IL.
Kiln was purchased in the 1970's and used by a ceramic artist up until her
health failed recently. This is located in the basement of an Evanston
mansion and must be disassembled to be moved. Original owners manuals and
assembly instructions are included. Firebricks may be mortared and may need
to be disassembled to move. I know the bricks in the door stay put when
moving but I'm not sure about the sides and floor.
Earl Brunner on mon 19 jun 06
If this is like the Alpines we had at school in the
70's then there really isn't much point in
"disassembling" it. That steel frame is HEAVY DUTY.
If you can't get it out without disassembly, how did
they get it in? Build the mansion around it?
Earl Brunner
Las Vegas, NV
-----Original Message----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On
Behalf Of caterbeth
Sent: Saturday, June 17, 2006 7:53 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: Kiln For Sale
Hi Everyone,
I'm in the market for a kiln so I've been watching Ebay
etc faithfully of
late. Due to it's size, I thought I'd pass the
following ad along to
interested Chicago area ClayArters. It doesn't have a
reserve so it might
be worth the "looksee." Sounds like its ^14 forced
draft gas. Probably 16
cu ft. Wish I were within 1000 miles of this or I'd go
get it myself.
Maybe someone here needs it. Here's the item number on
Ebay: 104752433770
Best,
Beth Eisenberg-Schapera
(PS. This is NOT my kiln for sale and unfortunately, I
don't know anything
about it.)
Alpine Gas fired Industrial Production Kiln
Model HF-16
Serial #1776
Exterior dimensions: 63" x 57" x 36" deep (not
including hood)
Interior dimensions: 42" x 36" x 23 1/2" - 26"
2 electric blowers
Due to sale of house this kiln, which cost several
thousand dollars, will be
sold with no reserve to the high bidder who can remove
it by July 30th, 2006
from Evanston, IL.
Kiln was purchased in the 1970's and used by a ceramic
artist up until her
health failed recently. This is located in the basement
of an Evanston
mansion and must be disassembled to be moved. Original
owners manuals and
assembly instructions are included. Firebricks may be
mortared and may need
to be disassembled to move. I know the bricks in the
door stay put when
moving but I'm not sure about the sides and floor.
_______________________________________________________
_______________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change
your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be
reached at melpots@pclink.com.
Inua on fri 1 dec 06
I need to make some changes and find I have one kiln to many.
For Sale: Paragon SnF 24" - Cone 8, 240 Volt, with stand. Has LiteLid
system
Conpletely refurbished - Brand new elements, brand new switches, brand
new sychros timer motor, several new bricks. Bottom and lid in good
condition. Outside jacket in good condition. Fired to bisque twice
since refurbishing.
Location: Chelsea, AL on US 280 just southeast of Birmingham, AL about
10 miles.
Please send inquiries off list or call 205-862-2025
Thanks,
John Rodgers
Chelsea, AL
Beth Casey on sat 2 dec 06
Hi,
I have a Cress Electric Kiln with Kiln Sitter for Sale. It is about 16 yrs old and I have had it for about a year. The kiln is in good working order and I have fired it about 4 times.
It fires to cone 6. In addition I have kiln shelves and stilts to go with it if interested. The price I bought it for a year ago was $350 and about $150 in accessories. I am selling all of it for $300/ obo.
I cannot deliver it but I am located in Mountain View. I also have pics and can answer any questions you might have.
Thanks,
Beth Casey
650-969-3484
casey2663@hotmail.com
---------------------------------
Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
Johanna Chase on tue 9 jan 07
FOR SALE: New Bedford, MA
SKUTT 818-240, single phase
Model K, 240 V, 26.7 Amps
with 818-240 WR extension ring
manual controls, with shelves and stand
Excellent condition, seldom used. $100
Also available FREE
Olympic 2327H
240V 45 Amps
Old, needs elements, but works.
Have used only for c04 but with new
elements should reach c6+.
Don Whitehouse on thu 5 apr 07
We have an Olympic kiln for sale. It is an older kiln sitter model.
It is oval with outside dimensions of 47" L, 35" W, 32" D.
We have used it for bisque and cone 6 firing. It should be good to cone 8.
It is located in Melbourne, FL and must be picked up.
Asking $400.00/OBO.
Reply to offline.
Don
val on wed 2 may 07
I hope I am allowed to do this!! I have a Skutt Model
231-18 38.5 Amps kiln for sale....My friend bought it
used it twice and then decided she didn't want to do
clay anymore....LOL...so she sold it to me but it is
too large for me and I can't reach the bottom so it is
for sale....call it new and sells as you know for over
a grand....I want $750.00 for it.....
Val
val@tlaz.com
Val Mann ww
Thoughts Become Things (The Secret)
HYPERLINK "mailto:val@tlaz.com"val@tlaz.com
HYPERLINK
"http://www.yesterdayschild.ca/"www.yesterdayschild.ca
Distributor/Consultant
HYPERLINK "http://www.eexcel.net/"www.eexcel.net
Where Science Meets Traditon
eexcel@tlaz.com
Reel Productions
HYPERLINK
"mailto:val@reelproductions.ca"val@reelproductions.ca
Business and Tribute Movies
519.913.1585
London,Ont.Canada
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.6.2/782 -
Release Date: 01/05/2007 2:10 AM
Eric Mehl on sat 3 nov 07
I have a Paragon Snf 243 7 cubic foot electric kiln for sale. It is 23"X28"
high ID and 29"X 35"H. This kiln I only used for bisque firings, and there
is not a chip brick in the inside at all. I comes with a Dawson Kiln
sitter, stand and 3 ea 1/2 shelves. I have it stored in a dry place and it
is ready to be sold. Suffice to say that I am downsizing a bit. I am asking
$889.00 fob columbus,ohio.
you can email me at the above address or call my cell and leave a message
614-477-9930.
thanks,eric
Ducka on thu 13 dec 07
I have an older Paragon Kiln for sale. It is 7 Cu. ft. 23" X 27",
Kiln sitter. The Brick and body are in good shape. If you want Pics I
can email them to you. I am asking $550.
Thank you
ducka@earthlink.net
Ducka on thu 13 dec 07
I apologize for forgetting to mention the kiln I am selling is in
Pittsboro NC. I was incredibly rudely reminded of this by a clayart
reader.
Ducka
Clayart SCtag on thu 13 dec 07
In a message dated 12/13/2007 10:08:10 A.M. Eastern Standard Time,
ducka@EARTHLINK.NET writes:
I have an older Paragon Kiln for sale. It is 7 Cu. ft. 23" X 27",
Kiln sitter. The Brick and body are in good shape. If you want Pics I
can email them to you. I am asking $550.
Thank you
ducka@earthlink.net
you need to post your location and whether you can ship, or not
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
Jacqueline Stanford on mon 14 jan 08
KILN FOE SALE - DLB (brick) 12 GEIL KILN WITH STANDARD VENT PACKAGE (Draft
hood with mounting brackets, collar, vent, pipe, roof jack, storm collar
and cap). FIRED LESS THAN 30 TIMES - LIKE NEW - $8500 OR BEST OFFER. YOU
PICK UP - Franktown, Co. mail@jacquelinestanford.com or 818-713-0464
Lesley Alexander on sat 8 jan 11
Santa Barbara, CA. 12 cubic foot Olsen updraft, over 10 years old. Good
condition except for the front facade, which has cracked bricks and a
gap-tooth arch. (The interior supporting arch is fine.) Asking $2500 for
someone to come and take it. Email me at ljonesa@cox.net for details. Lesle=
y
Alexander
lesley alexander on sun 23 jan 11
Santa Barbara, CA.
12 cubic foot Olsen updraft kiln. About 12 years old, fired maybe 25 =3D
times. Good condition except for front facade, which has cracked bricks. =
=3D
Workable like that, however.=3D20
Selling for two thousand two fifty ($2250.00). Photos available.
Lesley Alexander
Lesley Alexander on wed 1 jun 11
KILN FOR SALE. 12 cubic foot Olsen updraft gas kiln, over 12 years old
but fired perhaps 2x a year. Photos available, email ljonesa@cox.net. Askin=
g
$1500, throwing in 10 12" x 24" shelves, some high aluminum, and posts.
Anita Evans on fri 1 jun 12
Model 18, Good Kiln Manufacturing Company, near Cleveland, Ohio. I am new
to list serve; would someone please confirm that you have received this
message?
Thanks, Anita
Ben Morrison on fri 1 jun 12
-Ben
________________________________=3D
Yep, we got it Anita.=3D0A=3D0A-Ben=3D0A=3D0A=3D0A=3D0A____________________=
____________=3D
=3D0A From: Anita Evans =3D0ATo: Clayart@LSV.CERAMICS.=
ORG =3D
=3D0ASent: Friday, June 1, 2012 10:57 AM=3D0ASubject: Kiln for Sale=3D0A =
=3D0AModel=3D
18, Good Kiln Manufacturing Company, near Cleveland, Ohio.=3DA0 I am new=
=3D0At=3D
o list serve; would someone please confirm that you have received this=3D0A=
me=3D
ssage?=3D0A=3D0AThanks, Anita
David Woof on sat 2 jun 12
Hi Anita=3D2C
=3D20
Welcome to the list. =3D20
=3D20
You could also sign up with the Potter Barter site to buy or sell pottery e=
=3D
quipmwnt etc.
=3D20
david
________________________________________________________________________
4a. Kiln for Sale
Posted by: "Anita Evans" aevans555@GMAIL.COM Date:=3D20
Fri Jun 1=3D2C 2012 1:59 pm ((PDT))=3D20
=3D20
Model 18=3D2C Good Kiln Manufacturing Company=3D2C near Cleveland=3D2C Ohio=
. I am=3D
newto list serve=3D3B would someone please confirm that you have received =
th=3D
ismessage?=3D20
Thanks=3D2C=3D20
Anita =3D
| |
|
