Jeremy/Bonnie Hellman on thu 2 may 96
Howdy Clayarters!
I'm looking for a reasonably priced source for the hollow externally
threaded rod used in lamps to hold the light socket (which screws into this
rod). It is 3/8" in diameter and 36" long. I'm looking to purchase about a
dozen of these rods (more or less), not a warehouse full.
Also, those of you who make and sell lamps, do you put lamp shades where
appropriate on the lamps or do you have a sample shade and sell the lamps
without shades? If you are buying shades, I'd appreciate the name of a good
source.
TIA for all responses.
Bonnie in Pittsburgh, PA
Jonathan Kaplan on fri 3 may 96
>----------------------------Original message----------------------------
>Howdy Clayarters!
>
>I'm looking for a reasonably priced source for the hollow externally
>threaded rod used in lamps to hold the light socket (which screws into this
>rod). It is 3/8" in diameter and 36" long. I'm looking to purchase about a
>dozen of these rods (more or less), not a warehouse full.
>
>Also, those of you who make and sell lamps, do you put lamp shades where
>appropriate on the lamps or do you have a sample shade and sell the lamps
>without shades? If you are buying shades, I'd appreciate the name of a good
>source.
>
>TIA for all responses.
>
>Bonnie in Pittsburgh, PA
There are many sources of lamp products. For incandescent stuff, and a
small amount of halogen stuff, the quintessential source is WN DeSherbinin,
Hawleyville, Ct.
The source for all your halogen needs, lots of imported cool high tech
European components is Glucksman Lighting Products, Garden City, NY.
Jonathan
Jonathan Kaplan
http://www.craftweb.com/org/jkaplan/cdg.shtml
(aka "Scooter)
jonathan@csn.net
Ceramic Design Group/Production Services Voice:
970-879-9139 POB 775112
FAXmodem: same
Steamboat Springs, Colorado 80477, USA CALL before faxing
"No matter where you go, there you are!"
Kurt Unterschuetz on sat 4 may 96
Jeremy/Bonnie Hellman wrote:
> I'm looking for a reasonably priced source for the hollow externally
> threaded rod used in lamps to hold the light socket.
Hi Guys :) I use Angelo Brothers Company located in Philadelphia, PA. The
number is 800-999-2226
> Also, those of you who make and sell lamps, I'd appreciate the name of a
> good source.
Try Shades by Sheila in Kosciusko, MS, 800-634-8229. I just started selling
lamps and I display and sell the shade with the lamp. Good Luck :)
Kurt Unterschuetz
SchatziBoyz Pottery
Marengo, IL USA
http://www.mc.net/schatzi
| |
|
