Ken L Russell on wed 4 dec 96
A while back, someone left a web address for a great place to get used
gas kilns. I went there once and forgot to bookmark it. If that person
could please post the address again, I'd sure appreciate it. TIA
Ken Russell
The Arlington Pottery
gone2pot@juno.com
afrancis on fri 10 jan 97
Hello all,
I teach/tech at The Interlaken School of Art in western Mass
(berkshires) I have many people ask me if there are any used equipment
dealers or dealers that have used equipment in New England or eastern
New York (wheels/kilns/puggers/mixers...) Any suggestions? We're also
interested in brick seconds. We could go anywhere in New York/PA or all
of New England for a donation or ? TIA
Andrew in the Berkshires
Jim Duffy on tue 1 jul 97
I'm new to the list. Is it fair (or against the rules) to solicit
amongst the readers for used equipment?
If so, I'm looking for a Slab Roller.
John McCain on wed 2 jul 97
Clayartists:
Jim Duffy asked about used equipment recently. Some of you including
Jim may not be aware of the Craft Equipment Exchange Newsletter at
http://www.sonic.net/ceen/
This newsletter has a section for ceramics; however, they seem to have
only a few items listed when I check. Maybe we should support them a
bit more?
Regards,
John McCain
Palo Pinto Pottery
Cynthia Reynolds on tue 23 sep 97
i have recently returned to louisville after getting my mfa in ceramics and
am trying to set up a studio. if anyone has suggestions about where i might
look for a used electric kiln, i'd really appreciate it. thanks. you can
email me directly at SpinCSR@aol.com with the info.
Alan Hathaway on tue 24 feb 98
------------------
2/23/98 9:15 AM
Used Equipment
There is an newer Art Center in Fond du Lac, WI, looking for used pottery
equipment. Does anyone have any used equiment for sale in Wisconsin or the
surrounding states? Or does anyone know who I could contact to find some =
used
equipment. Wheels, kilns, bricks, mixers, puggers. We would be interested in
looking at just about anything at this time.
Thanks for any tips.
Alan Hathaway
Laura FREEDMAN on tue 3 mar 98
I am looking for used equipment: slab roller, wheel, deair pug mill. Am
in southcentral PA but would be willing to travel a bit out of the area.
Thanks. lauras@epix. net
taracady@mindspring.com on sat 4 jul 98
Several days ago I posted interest in a used Brent slab roller. No luck.
I also saw a reference by someone who mentioned Pacific Ceramics, who
deals in used equipment. Does anyone know where Pacific Ceramics is? Or
other dealers in used equipment? or a web site for used ceramic supply
classifieds? I can do my own research if someone can point me in the
right direction. I have done general WWW searches to no avail. Thanks.
Linda Stauffer on sun 5 jul 98
A great site for used equipment is
Chris Giorgetti on mon 6 jul 98
Pacific Ceramics is at http://www.pacceram.com/. They're in Stockton, Californi
Chris Giorgetti
Lotsa Pots!
-----Original Message-----
From: taracady@mindspring.com [SMTP:taracady@mindspring.com]
Sent: Saturday, July 04, 1998 6:28 AM
To: Multiple recipients of list CLAYART
Subject: Used Equipment
----------------------------Original message----------------------------
Several days ago I posted interest in a used Brent slab roller. No luck.
I also saw a reference by someone who mentioned Pacific Ceramics, who
deals in used equipment. Does anyone know where Pacific Ceramics is? Or
other dealers in used equipment? or a web site for used ceramic supply
classifieds? I can do my own research if someone can point me in the
right direction. I have done general WWW searches to no avail. Thanks.
Jim Cullen on mon 6 jul 98
Pacific Ceramics is at WWW.PACCERAM.COM
They sell to the pottery industry, a lot of their equipment is industrial in
size. I was there recently and didn't see any slab rollers, you can e-mail
them with your request (I didn't). I put a request out for a slab roller about
4 months ago and didn't get any responses. I guess slab rollers are in demand.
I'm in the process of building my own. Not the preferred method but I can't
afford a new one. Good luck in your search.
bIlL BuCkNeR on mon 6 jul 98
This URL does not seem to point to an active server. Is there a typo? -Bill
At 01:04 PM 7/5/98 EDT, you wrote:
>----------------------------Original message----------------------------
>A great site for used equipment is
>
e-mail: billtom@mindspring.com
web: http://billtom.home.mindspring.com
Why do they put Braille on drive-through bank machines?
Ross Hartman on tue 7 jul 98
TWIMC;
The last info I have for Pacific Ceramic is:
Pacific Ceramic
Machinery and Equipment
P.O. Box 7842
Stockton, California 95207
209-462-3405
Mr. Ron Poelstra , pres.
They used to publish a newsprint newsletter that had equipment
inventories and advertisements from various manufacturers. Although I
believe they were geared more for industrial ceramics production they
did have some stuff that would be useful to potters. The last newletter
I got was in July 91, but I think they are still around.
HTH..
L8R/Ross
Jim Cullen on tue 7 jul 98
The URL is www.kilnray.com
Too bad when people give out incorrect information.
Linda Stauffer on tue 7 jul 98
Sorry there was a typo , it should be :
Some day I'll learn to type!!! Bifocals and computer screens just don't
work!
Joe Brecha on wed 26 jul 06
We just got in some used wheels. We went through them and made sure =
things were working. We have two of the Amaco shimpo copies, 1 Brent =
and one shimpo. All are 450.00 each. Joe Clay Art Center 1 800 952 =
8030
| |
|
