DIRTYBIRD5@aol.com on fri 26 apr 96
I've become aware of a used 24" Northstar Slab Roller for sale in the
Washington, D.C. area. It comes with table, never been used, $550.00.
If you're interested e-mail me directly and I'll send you the phone number to
contact.
Julie
Manassas, VA
.....still looking for a used pugmill....
Sam Cuttell on sat 27 apr 96
At 04:37 PM 4/26/96 EDT, you wrote:
>----------------------------Original message----------------------------
>I've become aware of a used 24" Northstar Slab Roller for sale in the
>Washington, D.C. area. It comes with table, never been used, $550.00.
>
>If you're interested e-mail me directly and I'll send you the phone number to
>contact.
>
>Julie
>Manassas, VA
>....still looking for a used pugmill....
>
Thanks, Julie....
BUT DC is about 800-1000 miles from here (I'm close to Detroit).
Anyone out there know of a slabroller a *bit* closer to home? :)
sam - alias the cat lady
scrounging and searching for good used stuff
taracady@mindspring.com on tue 30 jun 98
I would like to buy a Brent 20" slab roller. Anyone know of a good source
for a used one?
Andi Cody on thu 28 oct 99
I am interested in getting a slab roller. If anyone in the Southern
California area has a used slab roller for sale, please contact me.
Thanks,
Andi in San Diego
Kurt M Vernikos on thu 27 apr 00
-------------------
I'm in the market for a used slab roller, new models are kind =
of
pricey. Do not have preference in make or model, only that slabs must be no
smaller than 24=22x 18=22. Will take care of shipping cost.
Thanks,
Kurt Vernikos
Tim Skeen on tue 25 jul 00
>Hi, claybuds--
>I'm looking for a used slab roller.
>Thanks,
>Sandy
Hi Sandy
If you can't find one, Greg Lamont (I think it was him) sent me plans to
make a slab roller. My husband built it and it works great. I have a
studio that I teach beginners and have open studio for other potters so it
gets a workout. It makes some groaning noise when we roll with it but it
sure makes even and wonderful slabs. We had a welding shop make the roller
and handle for us, that was before I took a welding class. If you have a
wood and metal shop at the art center your in business. I don't have the
plans anymore but you could check the archives. Good Luck!
Best Wishes,
Audrey
mailto:t.askeen@att.net
http://t.askeen.home.att.net
Best Wishes,
Audrey
mailto:t.askeen@att.net
http://t.askeen.home.att.net
marshko@JUNO.COM on mon 20 aug 01
Hi,
My name is Marsha Koenig.
I roll alot of slabs by hand & it's starting to effect my wrists. I
am interested in buying a good used 18" or 24" slab roller - mechanism &
canvas only - I have no room for the table.
It was suggested that I might be able to find one through your
organization. I'd appreciate any help you can offer.
Thank you very much.
Marsh
http://www.marshpottery.com.
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
| |
|
