Barbara Francis on mon 30 apr 07
I am thinking of buying a Jenkin kiln for $150 including an exhaust system. It's pretty small, about hip height on the stand. The bricks inside look good, there are a couple of slightly bulging elements. What do you think? Do any of you have any experience with the jenkins brand? Thanks for the input.
Barbara Francis
Michelle wrote:
Randy, Thank you for the extruder stand picture, I like it; does anyone else
have any ideas. My home studio is my front living room we never used. So, I
am a little tight on space and still trying to keep it looking somewhat like
a living room.
Michelle DuGuay Landers
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Randy McCall
Sent: Saturday, April 28, 2007 6:01 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: Extruder Stand Picture
Here is a picture of the stand at this site.
http://members.tripod.com/~McCallJ/Stand.jpg
Randy
South Carolina
Pottery Web site
http://members.tripod.com/~McCallJ/index.html
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
______________________________________________________________________________
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.
Cheryl Fisher on mon 30 apr 07
The company should be Jen-Ken Kilns
3615 Ventura Drive West, Lakeland, FL 33811
(863) 648-0585
They used to be located in Sarasota where I live but moved to Lakeland
many years ago.
I used the kilns when I was teaching. When I went to my second school
in 1973 we had those kilns. I think I had the first kiln for 20 years
and then replaced it with another one. This was before exhaust systems.
It served me well.
Summit Kilns & Repair
4922 Addessi Loop, Land O Lakes, FL 33602
813) 996-2575
phone: (352) 684-0600
The above business advertises as repairing "Jenkins" kilns.
Cheryl Fisher
Sarasota, Florida USA
potterytalk@verizon.net
Arnold Howard on mon 30 apr 07
The current owners of Jen-Ken kilns offer excellent customer
service. I've known them for years.
Sincerely,
Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA
ahoward@paragonweb.com / www.paragonweb.com
| |
|
