Pat Lindemann on sat 26 may 07
So does anyone know whether a person can purchase grog from any other type
of business besides pottery supply places? Masonry places? Lumber yards?
Brickyards? Ideas anyone?
any info would be appreciated!
thank you!!
Pat
Craig Clark on sat 26 may 07
Pat, if you are looking for a comprehensive listing of most things
that have any type of industrial application then the Thomas Register is
always a good place to start. I have included the link at the end of
this post. If it doesn't link, then just google Thomas Register and the
first listing is to their web sight. Once you get there just do a search
using grog refractories, and you will pull up quite a few sources across
the country. Make sure you get the whole string if it isn't hyperlinked.
Here's the link:
http://www.thomasnet.com/index.html?INCP=1&WT.mc_t=PPC&WT.mc_n=gaw&WT.srch=1
Hope this helps
Craig Dunn CLark
619 East 11 1/2 St
Houston, Texas 77008
(713)861-2083
mudman@hal-pc.org
http://mudman00.blogspot.com/
Pat Lindemann wrote:
> So does anyone know whether a person can purchase grog from any other
> type
> of business besides pottery supply places? Masonry places? Lumber
> yards?
> Brickyards? Ideas anyone?
> any info would be appreciated!
> thank you!!
>
> Pat
>
> ______________________________________________________________________________
>
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
David Berg on sun 27 may 07
Its pretty easy to make your own grog out of wheel trimming scraps.
Let the
trimmings dry to bone dry. Spread them out on a hard surface and crush
them up to the desired size with a rolling pin, mix and crush more if
necessary. Bisque fire in a bowl. After bisque, you may wash away the
dust if you want.
David
On May 26, 2007, at 3:19 PM, Pat Lindemann wrote:
> So does anyone know whether a person can purchase grog from any
> other type
> of business besides pottery supply places? Masonry places? Lumber
> yards?
> Brickyards? Ideas anyone?
> any info would be appreciated!
> thank you!!
>
> Pat
>
> ______________________________________________________________________
> ________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
David Berg
dberg2@comcast.net
http://bergstoneware.com/
sacredclay on mon 28 may 07
Grog is just fired clay that's grounded up. You can make your own by
grinding up the dried clay and fire it to maturity. Add to your clay
body. but alas, this isn't the answer to your question, as I don't
know where else. Good luck! Kathryn in NC -- In
clayart@yahoogroups.com, Pat Lindemann wrote:
>
> So does anyone know whether a person can purchase grog from any
other type
> of business besides pottery supply places? Masonry places? Lumber
yards?
> Brickyards? Ideas anyone?
> any info would be appreciated!
> thank you!!
>
> Pat
>
>
______________________________________________________________________
________
> Send postings to clayart@...
>
> You may look at the archives for the list or change your
subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@...
>
| |
|
