Maggie Jones on fri 21 sep 07
Hi Meg,
Years ago the cones were packed in vermiculite and in those days the
numbers were on the flat side indicating direction of bend.
Nowdays, they are packed in the foam and the numbers are on the side. The
direction of bend would be to the left with the number facing you.
have a good day,
maggie
http://TurtleIslandPottery.com
Maggie and Freeman Jones
828.669.2713
.........next OPEN Sept 29th spread the word!
On Thu, 20 Sep 2007 19:37:25 EDT Clayart SCtag
writes:
> Ok,all of you mention I do but if you have the catch basin ''my
> word''
> facing left as you look at the pack,which side f the cone, flat or
> point faces
> into the ''basin''? Facing this way, are the numbers facing you or
> the opposite
> side? Where do you face the ''shiny side''? I have made cone packs
> for
> decades, but was away from it and a young fellow at his university
> told me I had
> made them facing the incorrect direction, Angle I knew, and I use
> vermiculite in the clay making them but newboxes of cones don;t
> seem to have it. I am
> checking with the ''peanut gallery'' to get a read and attempt to
> see if I've
> had a ''senior moment'',lol.I did know the a
>
> Many thanks to those who bothered to answer,and yes I did check
> archives.
>
> Meg
>
>
>
> ************************************** See what's new at
> http://www.aol.com
>
>
_________________________________________________________________________
_____
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your
> subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots2@visi.com
>
>
| |
|
