Pat's Pottery on sat 17 nov 07
Two people suggested replacing the Custer with Nepheline Syenite.
on the question I asked below. Would I replace it in the same quantity? I
think I saw a post from someone from ClayTimes on this list. Would there be
anyway to contact Tim Eberhardt and ask him what he used at cone 6?
************************************
Pat Parker's Stoneware Pottery
Web Site: http://www.stonewarepottery.net/
Email address: Pat@stonewarepottery.net
***********************************
> --- Pat's Pottery wrote:
There is an article in the new Nov issue of Clay Times giving a recipe for a
"Salvation Glaze" by Tim Eberhardt. He does not give any contact info. It
is for a cone 10 but he says it will also work for cone 6 with the addition
of a few ingredients to drop the melting point. I would love to try this
glaze, but fire at cone 5/6. Can anyone help me with the added ingredients?
Salvation Glaze cone 10 oxidation or reduction
custer feldspar 27%
gerstley borate 12%
dolomite 8.8%
talc 19%
om4 7.5%
silica 25.2 %
************************************
Pat Parker's Stoneware Pottery
Web Site: http://www.stonewarepottery.net/
Email address: Pat@stonewarepottery.net
*********************************** >
Maggie Jones on sun 18 nov 07
I guess my post didn show up.
replace any feldspar in a glaze, same quantity, with NS and it should
bring the maturation point down.
www.newartpottery.com
tell Tim I toldya,... he's a generous guy.
Maggie
http://TurtleIslandPottery.com
Maggie and Freeman Jones
On Sat, 17 Nov 2007 23:54:14 -0500 Pat's Pottery
writes:
> Two people suggested replacing the Custer with Nepheline Syenite.
> on the question I asked below. Would I replace it in the same
> quantity? I
> think I saw a post from someone from ClayTimes on this list. Would
> there be
> anyway to contact Tim Eberhardt and ask him what he used at cone 6?
> ************************************
> Pat Parker's Stoneware Pottery
> Web Site: http://www.stonewarepottery.net/
> Email address: Pat@stonewarepottery.net
> ***********************************
> > --- Pat's Pottery wrote:
> There is an article in the new Nov issue of Clay Times giving a
> recipe for a
> "Salvation Glaze" by Tim Eberhardt. He does not give any contact
> info. It
> is for a cone 10 but he says it will also work for cone 6 with the
> addition
> of a few ingredients to drop the melting point. I would love to try
> this
> glaze, but fire at cone 5/6. Can anyone help me with the added
> ingredients?
>
> Salvation Glaze cone 10 oxidation or reduction
> custer feldspar 27%
> gerstley borate 12%
> dolomite 8.8%
> talc 19%
> om4 7.5%
> silica 25.2 %
> ************************************
> Pat Parker's Stoneware Pottery
> Web Site: http://www.stonewarepottery.net/
> Email address: Pat@stonewarepottery.net
> *********************************** >
>
>
_________________________________________________________________________
_____
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, or change
> your
> subscription settings here: http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots2@visi.com
>
>
| |
|
