Victoria E. Hamilton on thu 22 nov 07
240,000 BTU, Cone 10
Nathan -
Can you say where you are located?
Vicki Hamilton
Seattle, WA
-----Original Message-----
From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Nathan Gartz
Sent: Wednesday, November 21, 2007 8:11 PM
To: CLAYART@LSV.CERAMICS.ORG
Subject: [CLAYART] FOR SALE: Olympic Torchbearer Gas Kiln 7.0 cu ft, 240,000
BTU, Cone 10
I have only used this kiln once to bisque . I built myself a custom Raku
kiln and I no longer need this guy. I wish I had room for it around the
studio, but space is limited so it must go. It is the model 2327G. It looks
like a regular electric kiln (a bit taller though because of the burners and
the blank ring) but is indeed a gas kiln. It also has the Ignition Ring (to
keep the burners lit in case the blow out and Thermo-couple Shutoff. I also
bought a blank ring to give the kiln an extra 4.5 inches in height (+$150)
as well as a furniture kit (+$339). With shipping and all the other goodies,
I paid well over $2200 for this wonderful kiln.
Contact me for pictures or any other questions, or if you want to buy it!
Looking for $1500 OBO
Nathan Gartz
email: nathan.gartz@gmail.com
web: nathangartz.com
____________________________________________________________________________
__
Clayart members may send postings to: clayart@lsv.ceramics.org
You may look at the archives for the list, post messages, or change your
subscription settings here: http://www.acers.org/cic/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots2@visi.com
| |
|
