Llewellyn Kouba on wed 19 dec 07
I would like to know how I
can lower the firing temperature on a cone 10 glazes to cone 6. I am
sure it would require a lot of testing etc. Lets assume they are one
gal of pre-mixed commercial glazes.
I would imagine it might be some frit or other but not sure where to
start here?
Thanks much
Llewellyn Kouba
Abbey Pottery
lena buch on thu 20 dec 07
You can try adding 3 tp 10% frits, trying different
types to fit with your glaaze. Also you can substitute
neph-sy for part of you spar.
Lee
--- Llewellyn Kouba
wrote:
---------------------------------
I would like to know how Ican lower the firing
temperature on a cone 10 glazes to cone 6. I amsure it
would require a lot of testing etc. Lets assume they
are onegal of pre-mixed commercial glazes.
I would imagine it might be some frit or other but not
sure where tostart here?
Thanks much
Llewellyn Kouba
Abbey Pottery
______________________________________________________________________________Clayart
members may send postings to:
clayart@lsv.ceramics.orgYou may look at the archives
for the list, post messages, or change
yoursubscription settings here:
http://www.acers.org/cic/clayart/Moderator of the list
is Mel Jacobson who may be reached at
melpots2@visi.com
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
| |
|
