search  current discussion  categories  wanted/for sale - for sale 

for sale: olympic torchbearer gas kiln 7.0 cu ft, 240,000 btu,

updated fri 4 jan 08

 

Nathan Gartz on thu 3 jan 08

Cone 10

Sorry about that, I forgot to add that. I am located in Milwaukee,
Wisconsin. I currently have a offer on the table but need it gone asap as a
new kiln is arriving today!

Feel free to email me at: nathan.gartz@gmail.com


Thanks!

Nathan






On Thu, 22 Nov 2007 12:03:45 -0800, Victoria E. Hamilton
wrote:

>Nathan -
>
>Can you say where you are located?
>
>Vicki Hamilton
>Seattle, WA
>
>-----Original Message-----
>From: Clayart [mailto:CLAYART@LSV.CERAMICS.ORG] On Behalf Of Nathan Gartz
>Sent: Wednesday, November 21, 2007 8:11 PM
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: [CLAYART] FOR SALE: Olympic Torchbearer Gas Kiln 7.0 cu ft, 240,000
>BTU, Cone 10
>
>I have only used this kiln once to bisque . I built myself a custom Raku
>kiln and I no longer need this guy. I wish I had room for it around the
>studio, but space is limited so it must go. It is the model 2327G. It looks
>like a regular electric kiln (a bit taller though because of the burners and
>the blank ring) but is indeed a gas kiln. It also has the Ignition Ring (to
>keep the burners lit in case the blow out and Thermo-couple Shutoff. I also
>bought a blank ring to give the kiln an extra 4.5 inches in height (+$150)
>as well as a furniture kit (+$339). With shipping and all the other goodies,
>I paid well over $2200 for this wonderful kiln.
>
>Contact me for pictures or any other questions, or if you want to buy it!
>
>Looking for $1500 OBO
>
>
>Nathan Gartz
>email: nathan.gartz@gmail.com
>web: nathangartz.com
>
>____________________________________________________________________________
>__
>Clayart members may send postings to: clayart@lsv.ceramics.org
>
>You may look at the archives for the list, post messages, or change your
>subscription settings here: http://www.acers.org/cic/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots2@visi.com
>
>______________________________________________________________________________
>Clayart members may send postings to: clayart@lsv.ceramics.org
>
>You may look at the archives for the list, post messages, or change your
>subscription settings here: http://www.acers.org/cic/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at melpots2@visi.com