pdp1@EARTHLINK.NET on sun 23 dec 07
Hi Jennifer,
I would enjoy dialoguing about this, and, in order for things to be kept
short and clear, and not too much at-once, may I begin by asking -
Once you realized something was not going right with the first Tool,
whatever your perceptions of that were at the time, why did you not contact
me in order to ask what is going on with it, or, to inquire about what you
were missing or needing to know, in order to use the Tool properly?
If you felt there was something 'wrong' with the Tool, why not contact me to
discuss it?
And, once you broke the first one, and went on then to breaking the second
one, I will guess in the same way? since it worked so well the first time?
Or? - I have to suppose you must have sensed something was not going as one
would hope?...so, whether you felt something was not right with the second
Tool too, or felt something was missing in your own understanding about how
to use them, why did you not contact me, to ask what was going on with it,
and or what you were missing, or needing to know, in order to be using them
correctly?
I am about as accessible as anyone on Earth could ever hope TO be.
I am 'here' on ClayArt frequently, you have internet access, my telephone
and e-mail are the first page or so of entrees on 'google' in case you did
not retain the Box or other source of my contact info, or you can ask anyone
who has my Tools how to get ahold of me, or ask the List here how to get
ahold of me, so...
What was your reason for not contacting me with your concerns or questions?
Lets start there, and we can see what all we may learn, discover, find out,
or as may be.
Once we settle that, we can proceed much better...
Best wishes,
Phil
Bison
Las Vegas
----- Original Message -----
From: "Jennifer Boyer"
> You're not alone Charles in terms of breaking Bisons. I've had 2
> break while I'm trimming: no dropping, just trimming. I gave up even
> though I loved the feel of them.
> I'm mourning the Dolans, but have about 4 left of my fave shape: the
> 555. I hope Dolan rises again! If anyone has any 555's in good shape
> that they don't use, I'm in the market.
>
> Jennifer
> On Dec 22, 2007, at 1:32 PM, Charles Hightower wrote:
>
>> It's sad. I can't find any Dolan's for sale. I'm far to clumsy for
>> a Bison.
>> Afraid I'd drop it walking to the table. That does happen. My flaw,
>> not the
>> tools. Anyways, I saw these on Axners site. I may buy one. My tools
>> are
>> getting mighty thin. The handles of these on Axner are ugly as H,
>> E, double
>> hockeystick but who cares I guess. Just thought I'd share the link for
>> those looking for good steel.
>>
>> http://www.axner.com/axner/tools/groovy-tools.php
>>
>> Charles Hightower
>> www.hightowerpottery.com
>> Evansville, IN
>>
>> ______________________________________________________________________
>> ________
>> Clayart members may send postings to: clayart@lsv.ceramics.org
>>
>> You may look at the archives for the list, post messages, or change
>> your
>> subscription settings here: http://www.acers.org/cic/clayart/
>>
>> Moderator of the list is Mel Jacobson who may be reached at
>> melpots2@visi.com
>
> *****************************
> Jennifer Boyer
> Thistle Hill Pottery
> Montpelier, VT
> http://thistlehillpottery.com
> *****************************
>
> ______________________________________________________________________________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, or change your
> subscription settings here: http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots2@visi.com
Bill Paxton on mon 24 dec 07
nice marketing and customer interface!
Pam Pulley on thu 27 dec 07
I read bits and pieces of this thread, so anyway... I had the same problem.
After paying for 2 of these great tools, I just can't come up with the
justification to get a 3rd one.
-pam
michigan
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
| |
|
