John Post on mon 10 mar 08
Hi Casey,
Get a new limit timer motor. Yours is broken. They are inexpensive
and easy to install.
Just remove the screws from the box that attaches the electric
switches to the kiln. (make sure it is unplugged when you do this).
Find the limit timer motor. Remove the screws holding it in place,
then put your new one in. The little knob you turn to set the limit
timer is usually held on with a recessed screw. You will need to
remove this before you can change the limit timer motor. It's harder
to explain this than it is to do it. Just take it apart and have a
good look at it and you will see what needs to be done.
John Post
Sterling Heights, Michigan
http://www.johnpost.us :: cone 6 glaze website ::
http://www.wemakeart.org :: elementary art website ::
On Mar 10, 2008, at 4:44 PM, Casey Burmester wrote:
> Hi I'm Casey. I just bought a used Cress Kiln FX1414P. My timer
> keeps turning off prematurely. I've
> set it anywhere from 1-6 hours and it turns off within minutes. The
> dial spins as it should, what
> should I do?
> Any help is much appreciated. Thanks,
> Casey
> caseyburm@hotmail.com
>
> ______________________________________________________________________________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, change your
> subscription settings or unsubscribe/leave the list here: http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots2@visi.com
>
Casey Burmester on mon 10 mar 08
Hi I'm Casey. I just bought a used Cress Kiln FX1414P. My timer keeps turning off prematurely. I've
set it anywhere from 1-6 hours and it turns off within minutes. The dial spins as it should, what
should I do?
Any help is much appreciated. Thanks,
Casey
caseyburm@hotmail.com
Casey Burmester on wed 12 mar 08
Thank you so much. I tried to get in touch with the manufacturer but they =
were very short in their answers and really no help. I appreciate yours. =
=20
Thanks,=20
Casey
----------------------------------------
> Date: Mon, 10 Mar 2008 20:32:12 -0400
> From: johnpost@WIDEOPENWEST.COM
> Subject: Re: cress kiln timer
> To: CLAYART@LSV.CERAMICS.ORG
>=20
> Hi Casey,
> Get a new limit timer motor. Yours is broken. They are inexpensive
> and easy to install.
>=20
> Just remove the screws from the box that attaches the electric
> switches to the kiln. (make sure it is unplugged when you do this).
> Find the limit timer motor. Remove the screws holding it in place,
> then put your new one in. The little knob you turn to set the limit
> timer is usually held on with a recessed screw. You will need to
> remove this before you can change the limit timer motor. It's harder
> to explain this than it is to do it. Just take it apart and have a
> good look at it and you will see what needs to be done.
>=20
> John Post
> Sterling Heights, Michigan
> http://www.johnpost.us :: cone 6 glaze website ::
> http://www.wemakeart.org :: elementary art website ::
>=20
>=20
>=20
>=20
> On Mar 10, 2008, at 4:44 PM, Casey Burmester wrote:
>=20
>> Hi I'm Casey. I just bought a used Cress Kiln FX1414P. My timer
>> keeps turning off prematurely. I've
>> set it anywhere from 1-6 hours and it turns off within minutes. The
>> dial spins as it should, what
>> should I do?
>> Any help is much appreciated. Thanks,
>> Casey
>> caseyburm@hotmail.com
>>
>> ________________________________________________________________________=
______
>> Clayart members may send postings to: clayart@lsv.ceramics.org
>>
>> You may look at the archives for the list, post messages, change your
>> subscription settings or unsubscribe/leave the list here: http://www.ac=
ers.org/cic/clayart/
>>
>> Moderator of the list is Mel Jacobson who may be reached at melpots2@vis=
i.com
>>
>=20
> _________________________________________________________________________=
_____
> Clayart members may send postings to: clayart@lsv.ceramics.org
>=20
> You may look at the archives for the list, post messages, change your
> subscription settings or unsubscribe/leave the list here: http://www.ace=
rs.org/cic/clayart/
>=20
> Moderator of the list is Mel Jacobson who may be reached at melpots2@visi=
.com
_________________________________________________________________
Climb to the top of the charts!=A0Play the word scramble challenge with sta=
r power.
http://club.live.com/star_shuffle.aspx?icid=3Dstarshuffle_wlmailtextlink_ja=
n=
| |
|
