Alisha Clarke on thu 13 mar 08
Aftosa currently carries them, but their website says they're
discontinuing them. I'd like to know if there is an alternative source
also (preferably at a lower price than the $5+ at Aftosa).
Alisha
On Thu, Mar 13, 2008 at 10:10 AM, Michael McIntyre wrote:
> Does anyone know where I can find metal pumps (w/ collars) for soap/
> lotion dispensers?
>
> mike
>
> ______________________________________________________________________________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, change your
> subscription settings or unsubscribe/leave the list here: http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots2@visi.com
>
--
~~~~~~~~~~~~~~~~~~~~~~~~~
Alisha Clarke
Pottery by Leesh: www.alishaclarke.com
Pottery Basics: www.potterybasics.com
Michael McIntyre on thu 13 mar 08
Does anyone know where I can find metal pumps (w/ collars) for soap/
lotion dispensers?
mike
David Hendley on thu 13 mar 08
Aftosa http://www.aftosa.com has "metal" pumps
(they are actually plastic, covered with metal), in 3
slightly different styles.
They do not come with collars, but they fit their
standard collars, which you can buy separately.
These things are expensive! A standard plastic pump
is about 45 cents and these are 10 times the price.
Also, be aware, they are bigger and more substantial-
looking than plastic pumps - they will dwarf a small
dispenser bottle and not look right.
If you make an appropriately sized lotion pot it will
look very good with one of these, which makes them
worth the substantial extra cost.
David Hendley
Maydelle, Texas
david(at)farmpots(dot)com
http://www.farmpots.com
----- Original Message -----
> Does anyone know where I can find metal pumps (w/ collars) for soap/
> lotion dispensers?
Jason Hooper on fri 14 mar 08
There are some cheaper ones here:
http://www.ezpots.com/Lotionpump.html
I've had a few of these (the SP-2 type) in heavy use at a salon, and
they are not as robust as they look. The innards are still plastic, and
they only last as long as the plastic ones, despite looking better.
I'm still on the lookout for more robust plastic ones, but all the
suppliers I can find seem to stock the same type as Aftosa.
Jason Hooper
http://www.jjhooper.com
--
Michael McIntyre wrote:
> Does anyone know where I can find metal pumps (w/ collars) for soap/
> lotion dispensers?
terri on fri 14 mar 08
Hi
I believe you can order them from Tuckers.
----- Original Message -----
From: "Alisha Clarke"
To:
Sent: Thursday, March 13, 2008 11:00 PM
Subject: Re: metal pumps
> Aftosa currently carries them, but their website says they're
> discontinuing them. I'd like to know if there is an alternative source
> also (preferably at a lower price than the $5+ at Aftosa).
> Alisha
>
> On Thu, Mar 13, 2008 at 10:10 AM, Michael McIntyre
> wrote:
>> Does anyone know where I can find metal pumps (w/ collars) for soap/
>> lotion dispensers?
>>
>> mike
>>
>> ______________________________________________________________________________
>> Clayart members may send postings to: clayart@lsv.ceramics.org
>>
>> You may look at the archives for the list, post messages, change your
>> subscription settings or unsubscribe/leave the list here:
>> http://www.acers.org/cic/clayart/
>>
>> Moderator of the list is Mel Jacobson who may be reached at
>> melpots2@visi.com
>>
>
>
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~~
> Alisha Clarke
> Pottery by Leesh: www.alishaclarke.com
> Pottery Basics: www.potterybasics.com
>
> ______________________________________________________________________________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, change your
> subscription settings or unsubscribe/leave the list here:
> http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots2@visi.com
>
>
| |
|
