David Turner on wed 2 apr 08
Had the opportunity to do some post fire reduction for a crystal glaze
muddobber friend of mine in a small jerry rigged test kiln. Took it up to
cone 016 and introduced some combustion. Got good results.The last firing
had a pot of mine that had a ash glaze over a cone 6 copper red.The copper
developed a flash of bright penny copper like a raku copper.The reduction
continued till the chamber was dark red. Got that from Rhodes..Clay and
Glazes for the Potter.
Post reduction's not just for raku anymore....
Flame on
David T.
Jesse Hull at Wiseman Ceramics on wed 2 apr 08
Hey David,
Lo! -and the day will come when we can post pictures to this well serving,
but archaic beast of a forum. :)
Do you perhaps have a link to these colors of which you speak?
And from where I'm standing --it's been a good while since post-fire was
only about Raku...
http://jessehull.com/new-work/crystalline-bottles/
http://jessehull.com/new-work/lidded-finial-jars/
http://jessehull.com/2007/09/01/post-fired-reduction-method/
Earth Nouveau on wed 2 apr 08
hey Jesse...don't have any yet..soon..Phil has some here.
http://www.puttgarden.com/crystal/2007/Page.html sorry about the "orange
juice's not just for breakfast anymore" line which surely dates this old
potter.It just never occurred to me to post reduce my stoneware cone 7
pots...But then again this new test kiln kicks it up to 1500 and back down
so quick, about an hour and a half of stoking takes it to dark where lots of
luster magic can happen.It's a kick.
David T.
>
John Britt on wed 2 apr 08
If you want copper lusters try it with Oribe's!
John Britt
www.johnbrittpottery.com
Earth Nouveau on mon 7 apr 08
hi jesse.... here's the copper flash
http://www.puttgarden.com/crystal/2008/4-6-08/DSC01090.jpg
the pot on the other side is my next cone 7 copper red too reduced piece
that's going to take a ride to post reductionville.It caught a bad case of
livery colored copper which hopefully will be cured by a short road trip. Do
you post reduce non crystal pots? or not....
David T.
On Wed, Apr 2, 2008 at 1:14 PM, Jesse Hull at Wiseman Ceramics <
wisemanceramics@yahoo.com> wrote:
> Hey David,
>
> Lo! -and the day will come when we can post pictures to this well serving,
> but archaic beast of a forum. :)
> Do you perhaps have a link to these colors of which you speak?
>
> And from where I'm standing --it's been a good while since post-fire was
> only about Raku...
> http://jessehull.com/new-work/crystalline-bottles/
>
> http://jessehull.com/new-work/lidded-finial-jars/
>
> http://jessehull.com/2007/09/01/post-fired-reduction-method/
>
>
> ______________________________________________________________________________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, change your
> subscription settings or unsubscribe/leave the list here:
> http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots2@visi.com
>
Earth Nouveau on wed 9 apr 08
hi jesse.... here's the copper flash
http://www.puttgarden.com/crystal/2008/4-6-08/DSC01090.jpg
the pot on the other side is my next cone 7 copper red too reduced piece
that's going to take a ride to post reductionville.It caught a bad case of
livery colored copper which hopefully will be cured by a short road trip. Do
you post reduce non crystal pots? or not....
David T.- Show quoted text -
On Wed, Apr 2, 2008 at 1:14 PM, Jesse Hull at Wiseman Ceramics <
wisemanceramics@yahoo.com> wrote:
> Hey David,
>
> Lo! -and the day will come when we can post pictures to this well serving,
> but archaic beast of a forum. :)
> Do you perhaps have a link to these colors of which you speak?
>
> And from where I'm standing --it's been a good while since post-fire was
> only about Raku...
> http://jessehull.com/new-work/crystalline-bottles/
>
> http://jessehull.com/new-work/lidded-finial-jars/
>
> http://jessehull.com/2007/09/01/post-fired-reduction-method/
>
>
> ______________________________________________________________________________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, change your
> subscription settings or unsubscribe/leave the list here:
> http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots2@visi.com
>
| |
|
