William & Susan Schran User on thu 1 may 08
I am posting this again as I am unsure whether the first got through.
I have an 18" x 18" kiln shelf available for a Clayart person that uses &
needs this size shelf. Shhhh, don't tell anybody, it's an Advancer!
You will only pay for shipping.
Please contact me, Bill
--
William "Bill" Schran
wschran@cox.net
wschran@nvcc.edu
http://www.creativecreekartisans.com
Jim Bob Salazar on thu 1 may 08
hey there bill,
where did you get the shelf?
i am looking for a set of them for an olson 36 kiln and can't find them.
i e-m the company twice and have not heard back from them.
thanks in advance,
jim bob
Jim Bob Salazar
Associate Professor of Art - Ceramics
Sul Ross State University
P.O. Box C - 43
Alpine, Texas 79832
432.837.8405 office
432.837.8280 studio
www.cone10potter.com
"No hurry - no worry" - Otto Heino
----- Original Message -----
From: "William & Susan Schran User"
To:
Sent: Thursday, May 01, 2008 9:36 AM
Subject: 18" x 18" kiln shelf
>I am posting this again as I am unsure whether the first got through.
>
> I have an 18" x 18" kiln shelf available for a Clayart person that uses &
> needs this size shelf. Shhhh, don't tell anybody, it's an Advancer!
>
> You will only pay for shipping.
>
> Please contact me, Bill
>
> --
> William "Bill" Schran
> wschran@cox.net
> wschran@nvcc.edu
> http://www.creativecreekartisans.com
>
> ______________________________________________________________________________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, change your
> subscription settings or unsubscribe/leave the list here:
> http://www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots2@visi.com
jonathan byler on thu 1 may 08
bill,
I sent you a message off list RE: this kiln shelf.
-jon
jon byler
3-D Building Coordinator
Art Department
Auburn University, AL 36849
On May 1, 2008, at 9:36 AM, William & Susan Schran User wrote:
> I am posting this again as I am unsure whether the first got through.
>
> I have an 18" x 18" kiln shelf available for a Clayart person that
> uses &
> needs this size shelf. Shhhh, don't tell anybody, it's an Advancer!
>
> You will only pay for shipping.
>
> Please contact me, Bill
>
> --
> William "Bill" Schran
> wschran@cox.net
> wschran@nvcc.edu
> http://www.creativecreekartisans.com
>
> ______________________________________________________________________
> ________
> Clayart members may send postings to: clayart@lsv.ceramics.org
>
> You may look at the archives for the list, post messages, change your
> subscription settings or unsubscribe/leave the list here: http://
> www.acers.org/cic/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots2@visi.com
William & Susan Schran User on thu 1 may 08
On 5/1/08 1:17 PM, "Jim Bob Salazar" wrote:
> where did you get the shelf?
> i am looking for a set of them for an olson 36 kiln and can't find them.
> i e-m the company twice and have not heard back from them.
Got it from Saint Gobains.
Contact Dona or Marshall at Smith-Sharpe:
http://www.kilnshelf.com/
Bill
| |
|
