Bryan Hannis on wed 19 nov 08
Hi
I cut my grates out of silicone carbide shelves and also out
of english made cone 10 shelves. Both shelves cut readily with a
cheap 7" diamond blade mounted in a 7.5" skill saw and water and
stand up to wood fire cone 10/12 and cone 10 wood soda. After 8 years
of use none have failed.
Bryan Hannis
Valemount,BC
William Perrine on thu 20 nov 08
Hey Bryan, thanks for your reply.? How wide did you make the strips for the grate?? I too know the strength for materials on edge. I' ve cut them with the same saw/ blade set up with ease when modifying shelf length for the upper part of my caternary arch of my kiln.
Bill Perrine
Homer, NY
-----Original Message-----
From: Bryan Hannis
To: CLAYART@LSV.CERAMICS.ORG
Sent: Thu, 20 Nov 2008 1:38 am
Subject: grates for wood kilns
Hi?
?
I cut my grates out of silicone carbide shelves and also out?
of english made cone 10 shelves. Both shelves cut readily with a?
cheap 7" diamond blade mounted in a 7.5" skill saw and water and?
stand up to wood fire cone 10/12 and cone 10 wood soda. After 8 years?
of use none have failed.?
?
Bryan Hannis?
Valemount,BC?
| |
|
