Annabelle on wed 14 oct 09
We need to add some additional venting in the kiln room. Currently there=
=3D
is a=3D20
wall mounted double vent system. We need an exhaust fan for the room=3D20
itself, one not attached to any of the kilns. There is only one exhaust =
=3D
point=3D20
through the concrete exterior wall; currently it=3D92s a 4=3D92 galvanized =
du=3D
ct=3D20
connected to the existing vent. I've been told that if we tie in anothe=
=3D
r vent=3D20
to the existing ducting (even ten feet above the blower, close to the exh=
=3D
aust=3D20
point) it will create some sort of affect on the venting of the kilns. =
=3D
Room size=3D20
is about 10 x 10 with 8 high ceiling., the current ducting has a straight=
=3D
run=3D20
through the ceiling, up about eight more feet and exits through the concr=
=3D
ete=3D20
wall. We can put more holes through the ceiling of the kiln room, but no=
=3D
t=3D20
through the exterior concrete wall. Does anyone know how we can do this?=
=3D
Thanks,
Annabelle in Naples Fl
| |
|
