mruth1@MAINE.RR.COM on wed 11 aug 10
Hi All,
I am interested in a clear glaze recipe that works well at cone 2 or 3. Do =
you have a suggestion?
Thanks,
Meryl Ruth, Porcelain Grace
http://www.merylruth.com
John Post on wed 18 aug 10
Hi Meryl,
I have 3 majolica glaze variations on my website that I fire regularly
to cone 1-3. Take the superpax out of them for clear. I use Rovin's
RO-82 terra cotta clay body. When I used the glazes over tiles bisque
fired to cone 04, the glaze was milky and had some bubbles in it. By
chance, I tried glazing a tile that I had fired to cone 1, and it came
out crystal clear. So I started bisque firing kiln loads of tiles at
cone 1, then dipping them into glaze and refiring to cone 1 and I
ended up with a very nice clear. You can find the recipes on this
page...
http://www.johnpost.us/pages/glaze-recipes-cone-6.html
most of the recipes on this page are for cone 6, but the majolica
glazes are for cone 1-3.
John Post
Sterling Heights, Michigan
http://www.johnpost.us
On Aug 11, 2010, at 5:25 PM, mruth1@maine.rr.com wrote:
> Hi All,
> I am interested in a clear glaze recipe that works well at cone 2 or
> 3. Do you have a suggestion?
>
> Thanks,
> Meryl Ruth, Porcelain Grace
> http://www.merylruth.com
| |
|
