Antoinette Badenhorst on mon 27 jun 11
Hi guys, for those of you that requested information about my workshops: I =
=3D
will do a demonstration, followed by a hands -on workshop at Pinon Hill pot=
=3D
tery in Colorado in July. You can find=3DC2=3DA0some details here: http://w=
ww.p=3D
inonhillpottery.com/Site_3/Workshops_.html=3D20
A little more about my workshop practices:=3D20
I will explain how porcelain clay=3DC2=3DA0differs or does not differ from =
othe=3D
r claybodies.=3D20
I will show how I throw and trim porcelain; the practices can apply to any =
=3D
claybody, but particularly if you=3DC2=3DA0throw smooth claybodies . I=3DC2=
=3DA0 ha=3D
ve a huge success rate to help those that struggle with centering to overco=
=3D
me it. ( have you heard about my "wave" technique?)=3D20
I will also=3DC2=3DA0 adjust the wheel thrown pieces and show some=3DC2=3DA=
0 decora=3D
ting techniques.=3D20
My pressmold techniques=3DC2=3DA0 applies to=3DC2=3DA0any claybody; I will =
work wit=3D
h porcelain. I will show how I do it and =3DC2=3DA0present ideas that will =
prov=3D
oke fresh ideas.=3D20
If you have questions. Let me know or else I will see you in La Veta Colora=
=3D
do!=3D20
Thanks.=3D20
Antoinette Badenhorst=3D20
www.porcelainbyAntoinette.com=3D20
May Luk on tue 28 jun 11
Hello Antoinette;
The pitch to your workshop is very elegant and effective. If I were in
Colorado, I would sign up right away!
Best regards
May
On Mon, Jun 27, 2011 at 10:30 AM, Antoinette Badenhorst
wrote:
> Hi guys, for those of you that requested information about my workshops: =
=3D
I will do a demonstration, followed by a hands -on workshop at Pinon Hill p=
=3D
ottery in Colorado in July. You can find=3DA0some details here: http://www.=
pi=3D
nonhillpottery.com/Site_3/Workshops_.html
>
>
>
> A little more about my workshop practices:
>
>
>
> I will explain how porcelain clay=3DA0differs or does not differ from oth=
er=3D
claybodies.
>
>
>
> I will show how I throw and trim porcelain; the practices can apply to an=
=3D
y claybody, but particularly if you=3DA0throw smooth claybodies . I=3DA0 ha=
ve a=3D
huge success rate to help those that struggle with centering to overcome i=
=3D
t. ( have you heard about my "wave" technique?)
>
> I will also=3DA0 adjust the wheel thrown pieces and show some=3DA0 decora=
ting=3D
techniques.
>
>
>
> My pressmold techniques=3DA0 applies to=3DA0any claybody; I will work wit=
h po=3D
rcelain. I will show how I do it and =3DA0present ideas that will provoke f=
re=3D
sh ideas.
>
>
>
> If you have questions. Let me know or else I will see you in La Veta Colo=
=3D
rado!
>
>
> Thanks.
>
>
> Antoinette Badenhorst
> www.porcelainbyAntoinette.com
>
--=3D20
http://twitter.com/MayLuk
http://www.ceramicsbrooklyn.com/
| |
|
