marci Boskie's Mama =3D^..^=3D on thu 10 may 12
in ?
Hey guys,
been reading the discussion about Lee's SIKW and it sounds like a
plan ! But will it work with cone 6 porcelain without plucking? I
know a lot of things out there , including the Advancer shelves ,
will make porcelain stick just enough to muck things up and rather
than shell out the bucks to find out that this is the same deal , I
thought I d see if any of you are using it with porcelain clay and if
youre having any issues.. ( I am using Laguna Frost ^6 , I raw glaze
and right now , am sprinkling dry Alumina hydrate on the shelf which
is a PIA! )
Thanks.
marci the chinapainter
PS. Dont forget that Paul Lewing's and my NCECA co-lecture on china
painting is on the PPIO forum , complete with the slides used.
www.PPIOforum.com , scroll down to NCECA thread .
Kim Hohlmayer on wed 16 may 12
in ?
=3DA0=3D0AI always use fine sand on the shelf to fire any porcelain from ^6=
to =3D
^10.=3DA0 Nothing sticks or drags.=3DA0 Porcelain doll crafters have used t=
his =3D
trick for ever.=3DA0 -Kim H.=3D0A =3D0A=3D0A_______________________________=
_=3D0A Fro=3D
m: marci Boskie's Mama =3D3D^..^=3D3D =3D0ATo: Clayart@LSV.=
CERAMI=3D
CS.ORG =3D0ASent: Thursday, May 10, 2012 9:46 AM=3D0ASubject: Re: Lee's Sup=
er I=3D
ncredible Kiln Wash ... will it work with porcelain ?=3D0A =3D0AHey guys,=
=3D0Abe=3D
en reading the discussion about Lee's SIKW and it sounds like a=3D0Aplan ! =
Bu=3D
t will it work with cone 6 porcelain without plucking?=3DA0 I=3D0Aknow a lo=
t of=3D
things out there , including=3DA0 the=3DA0 Advancer shelves ,=3D0Awill mak=
e porc=3D
elain stick just enough to muck things up and rather=3D0Athan shell out the=
b=3D
ucks to find out that this is the same deal , I=3D0Athought I d see if any =
of=3D
you are using it with porcelain clay and if=3D0Ayoure having any issues.. =
( =3D
I am using Laguna Frost ^6 , I raw glaze=3D0Aand right now , am sprinkling =
dr=3D
y Alumina hydrate on the shelf which=3D0Ais a PIA! )=3D0AThanks.=3D0Amarci =
the ch=3D
inapainter=3D0APS. Dont forget that Paul Lewing's and my NCECA co-lecture o=
n =3D
china=3D0Apainting is on the PPIO forum , complete with the slides used.=3D=
0Aww=3D
w.PPIOforum.com , scroll down to NCECA=3DA0 thread .
| |
|
