Olympia Techie on mon 16 jul 12
Hi there!
I have recently purchased a used kiln and was surprised to find out that
someone has altered the wiring inside of it. In order to put the wires ba=
=3D
ck
the way they should be, I need a schematic for it. I tried calling Olympi=
=3D
c
Kilns and they said my model was too old to carry any schematics for it. =
=3D
So
I am calling out to all of you in the hopes I could get some information =
=3D
on
where to find this model's schematic. Google has failed me so far, but I
hope you will give me the answers I need.
SPECS:
Manufacturer: Olympic Kiln
Model Number: HD5432E
Voltage: 400 volts
SERIAL: PO663
Amps: 48
Watts: 28,800
3 phase
Maximum temp: 2350
Cycles: 60 Hz
Firing cone: #10
Please let me know if you find any info!
Rob Haugen on tue 17 jul 12
I have e-mailed you a schematic for your kiln.
Rob Haugen
Olympic Kilns
-----Original Message-----
From: Clayart [mailto:Clayart@LSV.CERAMICS.ORG] On Behalf Of Olympia Techie
Sent: Monday, July 16, 2012 5:49 PM
To: Clayart@LSV.CERAMICS.ORG
Subject: Need Schematics for an old Olympic Kiln
Hi there!
I have recently purchased a used kiln and was surprised to find out that
someone has altered the wiring inside of it. In order to put the wires back
the way they should be, I need a schematic for it. I tried calling Olympic
Kilns and they said my model was too old to carry any schematics for it. So
I am calling out to all of you in the hopes I could get some information on
where to find this model's schematic. Google has failed me so far, but I
hope you will give me the answers I need.
SPECS:
Manufacturer: Olympic Kiln
Model Number: HD5432E
Voltage: 400 volts
SERIAL: PO663
Amps: 48
Watts: 28,800
3 phase
Maximum temp: 2350
Cycles: 60 Hz
Firing cone: #10
Please let me know if you find any info!
| |
|
