Neil Edgson on fri 15 may 98
My college tutor has asked me to see if I can get some chun glaze
recipes as those he has available aren't satisfactory.
Any help would be much appreciated.
--
Neil Edgson
John & Anne Worner on sat 16 may 98
Hi Neil,
The following chun recipe is one that I have modified from one that my
previous teacher also had modified and so on. I think this has travelled
quite a bit. It works well in both oxidation and reduction, has a lot of
visual texture. Let me know if it works out for you.
Anne Worner
Spring, TX
Worner Chun Blue ^8-10 RX or OX
==================================================
22.12 WOLLASTONITE
29.72 CUSTER FELDSPAR
23.16 EPK KAOLIN
21.28 FLINT
3.73 MAGNESIUM CARBONATE
10 ULTROX
5 RUTILE
*1 Cobalt Oxide
*1 Red Iron Oxide
CaO 0.69* 10.47%
MgO 0.14* 1.54%
K2O 0.11* 2.88%
Na2O 0.05* 0.81%
SrO 0.00* 0.01%
TiO2 0.22 4.62%
ZrO2 0.18 6.01%
Al2O3 0.47 12.99%
P2O5 0.00 0.05%
SiO2 3.73 60.30%
Fe2O3 0.01 0.31%
MnO 0.00* 0.02%
Cost/kg 0.92
Si:Al 7.88
SiB:Al 7.88
Expan 6.61
Neil Edgson wrote:
> ----------------------------Original message----------------------------
> My college tutor has asked me to see if I can get some chun glaze
> recipes as those he has available aren't satisfactory.
>
> Any help would be much appreciated.
> --
> Neil Edgson
Dana Henson on sat 16 may 98
Hello,
What about these Chun glazes makes them unsatisfactory? Just wondering.
Dana Henson
G_Henson@venus.twu.edu near Denton, TX
hal mc whinnie on sun 17 may 98
try following simple formula
custer spar 40
silica 30
whiting 20
epk 10
add iron oxide for color 1%
-----Original Message-----
From: Neil Edgson
To: Multiple recipients of list CLAYART
Date: Friday, May 15, 1998 2:55 PM
Subject: CHUN recipe request
----------------------------Original message----------------------------
My college tutor has asked me to see if I can get some chun glaze
recipes as those he has available aren't satisfactory.
Any help would be much appreciated.
--
Neil Edgson
Marley Wolhud on mon 18 may 98
What does this get fired at? I am also looking for a nice Chun glaze
that I can fire ^6
Thanks
hal mc whinnie on wed 20 may 98
to adjust a cone 8-10 glaze for cone 6 yhou can try to substitute neph syn
for the feldspar
-----Original Message-----
From: Marley Wolhud
To: Multiple recipients of list CLAYART
Date: Monday, May 18, 1998 2:42 PM
Subject: Re: CHUN recipe request
>----------------------------Original message----------------------------
>What does this get fired at? I am also looking for a nice Chun glaze
>that I can fire ^6
>
>Thanks
| |
|
