Jonathan Kaplan on fri 26 jun 98
We use adhesive backed sanding disks, available in a variety of grit sizes
for this process. Take some spare bats, designate them for 2 sizes of
grits, and use your wheel and sand away. We use a 60 grit with does a fine
smoothing job,and sometimes finish up with an 80 grit.
These are available form most home supply stores or industrial suppliers
such as WW Graingers or McMaster Carr.
Jonathan
Jonathan Kaplan, president jonathan@csn.net
http://www.sni.net/ceramicdesign/
Ceramic Design Group Ltd./Production Services
PO Box 775112
Steamboat Springs CO 80477
(USPS deliveries only)
Plant Location
1280 13th Street Unit 13
Steamboat Springs CO 80487
( UPS, courier, and common carrier deliveries)
(970) 879-9139*voice and fax
http://www.sni.net/ceramicdesign/
http://digitalfire.com/education/clay/kaplan1.htm
Bob Hanlin on sat 27 jun 98
I've followed this thread and have yet failed to see the solution I use.
Bob Briscoe turned me on to this one. Get a "flap wheel" for your bench
grinder (little strips of sandpaper or emery cloth on a gizmo that will fit
on your arbor, mine must have 50-60 little strips) you can use it like a
buffer to take off the rough bottoms.
Works like a charm.
At 01:29 PM 6/26/98 EDT, you wrote:
>----------------------------Original message----------------------------
>We use adhesive backed sanding disks, available in a variety of grit sizes
>for this process. Take some spare bats, designate them for 2 sizes of
>grits, and use your wheel and sand away. We use a 60 grit with does a fine
>smoothing job,and sometimes finish up with an 80 grit.
>
>These are available form most home supply stores or industrial suppliers
>such as WW Graingers or McMaster Carr.
>
>Jonathan
>
>
>
>Jonathan Kaplan, president jonathan@csn.net
>http://www.sni.net/ceramicdesign/
>Ceramic Design Group Ltd./Production Services
>PO Box 775112
>Steamboat Springs CO 80477
>(USPS deliveries only)
>
>Plant Location
>1280 13th Street Unit 13
>Steamboat Springs CO 80487
>( UPS, courier, and common carrier deliveries)
>
>(970) 879-9139*voice and fax
>
>http://www.sni.net/ceramicdesign/
>http://digitalfire.com/education/clay/kaplan1.htm
>
>
Bob Hanlin
bhanlin@ionet.net
Oklahoma City, OK
| |
|
