Talbott on thu 16 jul 98
Craig.. contact Axner Pottery.. They have a toll free phone # and e-mail
address but don't have 'em now. Anyway they have a video on the Jolly
Jigger which shows you a lot about the process.. Hope you get better
soon..
Marshall
http://www.PotteryInfo.com
>----------------------------Original message----------------------------
>Hi:
>
>As some of you know, I'm laid up with a broken wrist. I may get the cast
>off in about a week, but maybe not until Aug 25th. Anyway, I work alone and
>I've always been a wheel person and a bit of a handbuilder and when I'm not
>able to make pots, I don't have an income. Luckily, I did really well at a
>show in May and have some cash in the cooler.
>
>I think I need to look at alternative methods of making, in case this
>happens again, or my ability to throw has been changed by my injury. So I'm
>wondering if any of you could tell me about jiggering units that you've used
>and liked. I do a lot of bowls, dinnerware, large platters, and some other
>stuff that I could jigger. I could actually run a jigger unit now even with
>the cast on but I can't possibly throw anything. Bummer!!
>
>Direct e-mails are fine if any of you care to respond.
>
>Thanx, Craig Martell-Oregon
http://www.PotteryInfo.com
101 CLAYART MUGS (Summer 1998)
2ND ANNUAL CLAYARTERS' GALLERY - NAPLES, MAINE (Summer 1998)
E-MAIL ME FOR APPLICATIONS
Celia & Marshall Talbott, Pottery By Celia, Route 114, P O Box 4116,
Naples, Maine 04055-4116,(207)693-6100 voice and fax,(call first)
---------------------------------------------------------------------
Clyde Tullis on fri 17 jul 98
I set up a jigger that has worked for years. Mold making system and all.
Third world tech. You will need a pug mill and a supplier that will make
you soooffft clay. My friend, Mic, calls it mush.
Clyde Tullis
c/o Raven Hill, Inc and MUDLARK POTTERY
0111 County Road 45
Howard, CO 81233
719-942-4772
FAX 719-942-3211
mudlark@ris.net
| |
|
