Leslie Wright on fri 27 nov 98
------------------
It was quite a while ago that I had to change the bearing in my Shimpo, but =
it
was extremely simple, that's for sure, because I'm mechanically challenged.
As a friend of mine says, =22don't panic, but be prepared to panic=22. The =
type
of bearing used in the Shimpo is not rare, nor is it expensive. Simply
extract the bearing and take it to any machine shop type location, I'm sure
nine out of ten will have the sealed bearing you require. This is not an
expensive item, maybe twenty bucks, tops-although it was a long time ago. =
I'm
so bloody old=21
Yours
Les
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F==
5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5=
F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
More than just email--Get your FREE Netscape WebMail account today at
http://home.netscape.com/netcenter/mail
| |
|
