Norm Straker on sun 22 nov 98
Hey folks,
I am wondering if anyone who owns a Brent CXC would let me know what the
Amp and Watt pull on it is. Need to know if I have sufficient power on
my breaker in my studio for one. Currently I am using a kick wheel. (no
amps needed) :)
Thanks in advance! Norm! 8^o
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
Bruce Girrell on mon 23 nov 98
Norm Straker wrote:
> I am wondering if anyone who owns a Brent CXC would let me know what
> the
> Amp and Watt pull on it is.
The plate on our CXC says 10 amps. It also says 1 HP, which would be
about 750 watts. Because the 10 amps is the greater of these, use that
number. A 15 amp breaker should be fine.
Bruce & Lynne Girrell
Vince Pitelka on mon 23 nov 98
>I am wondering if anyone who owns a Brent CXC would let me know what the
>Amp and Watt pull on it is. Need to know if I have sufficient power on
>my breaker in my studio for one. Currently I am using a kick wheel. (no
>amps needed) :)
Norm -
Someone else will no doubt post the actual amperage draw, but you do not
have to worry. These machines really do not draw much amperage at all. I
would not recommend to anyone else that they try this, but when I was
teaching at North Dakota State University in Fargo, I arranged the thirteen
Brent wheels in an oval in the center of one end of the room. I ran a
single heavy-duty extension cord from a single outlet, and dropped it down
overhead, and plugges ALL the wheels into it via several plug strips. I
figured the worst that could happen would be to blow the breaker. It was
still like this three years later when I left ND, with never a problem at all.
- Vince
Vince Pitelka - vpitelka@DeKalb.net
Home 615/597-5376, work 615/597-6801, fax 615/597-6803
Appalachian Center for Crafts
Tennessee Technological University
1560 Craft Center Drive, Smithville TN 37166
Judith Enright on tue 24 nov 98
>----------------------------Original message----------------------------
>Hey folks,
>
>I am wondering if anyone who owns a Brent CXC would let me know what the
>Amp and Watt pull on it is. Need to know if I have sufficient power on
>my breaker in my studio for one. Currently I am using a kick wheel. (no
>amps needed) :)
>
>Thanks in advance! Norm! 8^o
>___________________________________________________________________
>You don't need to buy Internet access to use free Internet e-mail.
>Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
>or call Juno at (800) 654-JUNO [654-5866]
My CXC uses a 3-prong (grounded) 110 volt AC outlet, regular household current.
In looking over the Brent product material from various distributors
(including Brent's itself), I can find nothing about amps and wattage.
Judith @ Black Leopard Clayware
| |
|