Sherry Lutz on tue 11 aug 98
Hi All,
I attended a workshop given by Don Holloway on crystalline glazing in July =
and
am in the market for a kiln with a kiln controller (my electric kilns won't =
go
up to Cone 10).I would could really use some input on the different brands =
of
kilns and controllers out there. During the workshop we used a Skutt with a
controller and a
Crusader with a Kilntronics Controller ( I understand that they are no =
longer
available) Any crystalline glaze potters out there? What are you using?
Sherry Lutz
smud10=40communique.net
The Kiln Gods on wed 12 aug 98
Hi,
Why not just convert your kilns so that they can reach cone 10?
Chris @
Euclid's Kilns and Elements
1-800-296-5456
Web Site: http://www.euclids.com
E-Mail: mail@euclids.com
Sherry Lutz on fri 14 aug 98
I've been told that the bricks in my kilns (Blue Diamond Kilns) wouldn't
make it to Cone 10. It would be a lot more than just replacing elements.
Thanks for the suggestion. I should probably confirm that with the
manufacturer.
-----Original Message-----
From: The Kiln Gods
To: CLAYART@LSV.UKY.EDU
Date: Wednesday, August 12, 1998 7:34 AM
Subject: Re: elec. kilns and kiln controllers
>----------------------------Original message----------------------------
>Hi,
>Why not just convert your kilns so that they can reach cone 10?
>Chris @
> Euclid's Kilns and Elements
> 1-800-296-5456
>Web Site: http://www.euclids.com
>E-Mail: mail@euclids.com
| |
|
