the Gallaghers on fri 8 jan 99
Does anyone have a good shino recipe that I can use in an electric to cone
6, and still get the leathery orange look?
Thanks.
Michelle
Earl Brunner on sat 9 jan 99
I'm sure others will reply with more info, but I have a question, shino's are
caused by the chemistry of the glaze, and clay and reduction, are you reducing
in your electric?
Earl Brunner
the Gallaghers wrote:
> ----------------------------Original message----------------------------
> Does anyone have a good shino recipe that I can use in an electric to cone
> 6, and still get the leathery orange look?
>
> Thanks.
> Michelle
the Gallaghers on mon 11 jan 99
No, we are not attempting a reduction atmosphere in an electric kiln, just
want a glaze that has the same, or a close similar quality.
Am I asking for the moon??
Michelle
-----Original Message-----
From: Earl Brunner
To: CLAYART@LSV.UKY.EDU
Date: Saturday, January 09, 1999 12:49 PM
Subject: Re: electric cone 6 shino
>----------------------------Original message----------------------------
>I'm sure others will reply with more info, but I have a question, shino's
are
>caused by the chemistry of the glaze, and clay and reduction, are you
reducing
>in your electric?
>Earl Brunner
>
>
>the Gallaghers wrote:
>
>> ----------------------------Original message----------------------------
>> Does anyone have a good shino recipe that I can use in an electric to
cone
>> 6, and still get the leathery orange look?
>>
>> Thanks.
>> Michelle
Veena Raghavan on tue 19 jan 99
Was anyone ever able to come up with a Cone 6 shino, is that an
impossibility. If it was posted, and I missed it, I would appreciate it if
someone would post it again. Thanks in advance
Veena Raghavan
75124.2520@compuserve.com
the Gallaghers on thu 21 jan 99
The response appeared to establish that the shino color is a result of the
reduction process, not possible in oxidation.
Some faux shino effects might be accomplished through much experimentation
though.
Hmmmmm.....
Michelle
In Oregon
-----Original Message-----
From: Veena Raghavan <75124.2520@compuserve.com>
To: CLAYART@LSV.UKY.EDU
Date: Wednesday, January 20, 1999 5:22 AM
Subject: electric cone 6 shino
>----------------------------Original message----------------------------
>Was anyone ever able to come up with a Cone 6 shino, is that an
>impossibility. If it was posted, and I missed it, I would appreciate it if
>someone would post it again. Thanks in advance
>Veena Raghavan
>75124.2520@compuserve.com
J Conway on thu 21 jan 99
>----------------------------Original message----------------------------
>Was anyone ever able to come up with a Cone 6 shino, is that an
>impossibility. If it was posted, and I missed it, I would appreciate it if
>someone would post it again. Thanks in advance
>Veena Raghavan
>75124.2520@compuserve.com
I tested this glaze and liked it. The main colour is a dark cream going to
a red where it breaks. If applied to thin it's red. I tested it on
Plainsman 340, a creamy white body. Whether is looks like a true shino, I
don't know, as I've only seen them in books. I collected this recipe from
Clayart in Oct./96 sent in by Rafael Molina-Rodriguez and I think it's on
the Clayart Glazebase.
Glaze name: Fall's Creek Shino
Cone: 6
Color: Opaque Tan-breaking red
Testing: Tested
Surface texture: Shiny or Glossy
Firing: Oxidation
Glaze type:
Recipe: Percent Batch
Gerstley Borate 18.69 18.69
F-4 Feldspar 9.35 9.35
Alberta Slip 56.07 56.07
Lithium Carb 6.54 6.54
Silica 9.35 9.35
Totals: 100.00 % 100.00 gm
Also add:
Zircopax 9.35 9.35
Tin Oxide 4.67 4.67
Possible Health Hazards:
Silica: free silica-wear a NIOSH approved dust mask when handling dry material
Unity Formula for Fall's Creek Shino:
0.076 K2O 0.311 Al2O3 2.717 SiO2
0.105 Na2O 0.248 B2O3 0.019 TiO2
0.422 CaO 0.057 Fe2O3 8.7:1 Si:Al Ratio
0.117 MgO
0.279 Li2O
Percentage Analysis:
59.76 % SiO2
11.61 % Al2O3
6.30 % B2O3
2.64 % K2O
2.38 % Na2O
8.68 % CaO
1.72 % MgO
3.04 % Li2O
3.33 % Fe2O3
0.55 % TiO2
Enjoy it.
Jackie Conway
150 Mile House, B.C., Canada
jconway@stardate.bc.ca
| |
|
