Maxine Cohn. on wed 2 dec 98
The Shimpo RK-10 is a cone drive wheel like the old Shimpo RK-2 only you do
not see the cones which are enclosed in an RX assembly.
Motors for current and earlier wheels are readily available through your local
Shimpo dealer. The motor for the RK-2 is easy to install. The motor for the
RK-10 is part of an RX assembly and is more difficult to install. This motor
is available but it is recommended the entire RX assembly be replaced which
can be done by removing only 4 screws.
The 2-piece pan with tray fits the RK-10 and Master wheel. The one-piece
large and small pans fit the RK-2, RK-10 and Master wheel. The large optional
table fits with the one-piece splash pans.
If you have any further questions, please do not hesitate to contact us at
630-671-2137/2138.
Thank you.
Laura
| |
|
