Karen on sun 12 mar 00
-------------------
Do you know of any one that has used potters wheels for sale?
Thank you
Karen
Rosielee Crenshaw on thu 2 mar 06
I live in Oklahoma and I am trying to find a used potters wheel (for a
reasonable price) I Sculpt but what to work on a wheel. I have called
everywhere I can think of. Does anyone have suggestions for a "wanna-be"
haha.
Thanks!
JOYCE LEE on thu 2 mar 06
ok
----- Original Message -----
From: "Rosielee Crenshaw"
To:
Sent: Thursday, March 02, 2006 5:36 AM
Subject: Used Potters Wheel
> I live in Oklahoma and I am trying to find a used potters wheel (for a
> reasonable price) I Sculpt but what to work on a wheel. I have called
> everywhere I can think of. Does anyone have suggestions for a "wanna-be"
> haha.
> Thanks!
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
leta troppmann on thu 2 mar 06
www.Craigslist.com is the way to go on this one! I recently purchased a GT400 for $375.00! A wonderful deal and it works wonderfully! It is a simular site to that of Ebay.
Good Luck!
Leta Medina
threereeds1 on thu 2 mar 06
Rosielee, You may have to drive. I picked up a good
Amaco 15 in Austin and a good Brent EJ in Ft. Worth.
Both were on Ebay. Check L&R Specialties in Nixa, Mo.
They have a buy and sell page on their website called
the Slurry bucket. Just listings. Scored two used bisque kilns
and some insulating fire brick through that source.
www.claydogs.com Also check on school system auctions
in your area and municipal clay studios. I am located in Tulsa
and reasonably priced goods can be found but proximity to
a larger population helps. Good Luck.
Tom
----- Original Message -----
From: "Rosielee Crenshaw"
To:
Sent: Thursday, March 02, 2006 7:36 AM
Subject: Used Potters Wheel
>I live in Oklahoma and I am trying to find a used potters wheel (for a
> reasonable price) I Sculpt but what to work on a wheel. I have called
> everywhere I can think of. Does anyone have suggestions for a "wanna-be"
> haha.
> Thanks!
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
| |
|
