Craig Martell on mon 15 may 00
Hi:
I'm trying to locate a rubber puck driver for a spinning tiger
wheel. These little hobby wheels have been out of production for a while
but a friend is trying to put one back in operation and needs one o' these
lil puck drivers. They are hard rubber and about an inch and a half or so
in diameter. They contact the inner side of the wheel head and drive the
wheel so you can make pots.
thanks, Craig Martell in Oregon
Barbara G. Mann on tue 16 may 00
Craig Martell wrote:
I'm trying to locate a rubber puck driver for a spinning tiger wheel.
Craig,
I have an Estrin wheel that also uses a "rubber puck driver." I believe I got one
once from Amaco at Brickyard Ceramics (800) 677-3289. Would you please let me know
your results as my driver is wearing and I should replace it soon.
Barbara Mann
Chester, VA
Earl Brunner on tue 16 may 00
You guys, I found this in the archives by subject. It's a
possible replacement.
http://www.potters.org/subject12031.htm
"Barbara G. Mann" wrote:
>
> Craig Martell wrote:
> I'm trying to locate a rubber puck driver for a spinning tiger wheel.
>
> Craig,
> I have an Estrin wheel that also uses a "rubber puck driver." I believe I got one
> once from Amaco at Brickyard Ceramics (800) 677-3289. Would you please let me know
> your results as my driver is wearing and I should replace it soon.
> Barbara Mann
> Chester, VA
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
--
Earl Brunner
http://coyote.accessnv.com/bruec
mailto:bruec@anv.net
Craig Fulladosa on wed 17 may 00
My friend and local clay supplier owns Botega Industries. He sells parts for Spinning
Tigers. Check out his web site.
http://www.botega.net/
This page refers to the spinning tiger.
http://www.botega.net/kilns.html
Earl Brunner wrote:
> You guys, I found this in the archives by subject. It's a
> possible replacement.
> http://www.potters.org/subject12031.htm
>
> "Barbara G. Mann" wrote:
> >
> > Craig Martell wrote:
> > I'm trying to locate a rubber puck driver for a spinning tiger wheel.
> >
> > Craig,
> > I have an Estrin wheel that also uses a "rubber puck driver." I believe I got one
> > once from Amaco at Brickyard Ceramics (800) 677-3289. Would you please let me know
> > your results as my driver is wearing and I should replace it soon.
> > Barbara Mann
> > Chester, VA
> >
> > ______________________________________________________________________________
> > Send postings to clayart@lsv.ceramics.org
> >
> > You may look at the archives for the list or change your subscription
> > settings from http://www.ceramics.org/clayart/
> >
> > Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
>
> --
> Earl Brunner
> http://coyote.accessnv.com/bruec
> mailto:bruec@anv.net
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
--
Craig
The Clayman
http://home.earthlink.net/~craigfull
| |
|
