Larry Phillips on sun 27 aug 00
Chris I Townsend wrote:
>
> The link to the site with the glaze geyser information is
>
> http://wwwputprod.demon.co.uk/pump.htm
That should be: http://www.putprod.demon.co.uk/pump.htm
--
Hukt on fonix werkt fer me!
http://cr347197-a.surrey1.bc.wave.home.com/larry/
kelty-huber on sun 27 aug 00
the address is missing a period after the www
>http://www.putprod.demon.co.uk/pump.htm
tom
At 08:23 PM 8/27/00 +0100, you wrote:
>The link to the site with the glaze geyser information is
>
>http://wwwputprod.demon.co.uk/pump.htm
>
>(not pitprod as given earlier)
>
>___________________________________________________________________________
___
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
Louis Katz on sun 27 aug 00
Needs a "." after the www
http://www.putprod.demon.co.uk/pump.htm
It is always a good idea to go to a site copy the URL and paste it into a page.
Cuts down on typo's
Thanks for posting the images, I am gonna go look at them.
Louis
Chris I Townsend wrote:
> The link to the site with the glaze geyser information is
>
> http://wwwputprod.demon.co.uk/pump.htm
>
> (not pitprod as given earlier)
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
WHC228@AOL.COM on sun 27 aug 00
Chris Townsend has helped us by putting all of the information where it is
easier to open.
Use http://wwwpitprod.demon.co.uk/pump Hopefully there is enough information
there for you to understand how to make the geyser.
There are W.W. Grainger catalogue numbers for the pump on the drawing. Anyone
not familiar with that catalogue can look up that information in the Yellow
Pages or on the web.
Chris I Townsend on sun 27 aug 00
The link to the site with the glaze geyser information is
http://wwwputprod.demon.co.uk/pump.htm
(not pitprod as given earlier)
Christopher Anton on sun 27 aug 00
Can you double check the URL? I was unable to connect to a site by clicking
on it. Got the old "page not accessible" message on several tries.
- Chris
----- Original Message -----
From:
To:
Sent: Sunday, August 27, 2000 10:58 AM
Subject: Glaze geyser URL
> Chris Townsend has helped us by putting all of the information where it is
> easier to open.
> Use http://wwwpitprod.demon.co.uk/pump Hopefully there is enough
information
> there for you to understand how to make the geyser.
> There are W.W. Grainger catalogue numbers for the pump on the drawing.
Anyone
> not familiar with that catalogue can look up that information in the
Yellow
> Pages or on the web.
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
WHC228@AOL.COM on mon 28 aug 00
CHRIS TOWNSEND Has corrected his URL it is putprod.demon.co.uk/pump Not
pitprod
Bill
| |
|
