michael wendt on mon 16 oct 00
Earl raised the point he wants repairs. I do repairs. I have a full =
machine shop including lathe, end mill, drill press, arbor press, keyway =
broaches, welder, plasma arc torch and oxy-propane torch. I work =
extensively in stainless with the aid of a local fabrication shop that =
has the larger ironworking tools like shears, rolls and pinch presses.
Michael Wendt=20
call me at 1-800-554-3724 or email me at wendtpot@lewiston.com
.. To see my machines visit http://users.lewiston.com/wendtpot
Earl Brunner on tue 17 oct 00
Just a minor correction, I wasn't needing the repairs, I was
just participating in the thread. The original post was by
Jim Brooks at JIMV062@AOL.COM
michael wendt wrote:
>
> Earl raised the point he wants repairs. I do repairs. I have a full machine shop including lathe, end mill, drill press, arbor press, keyway broaches, welder, plasma arc torch and oxy-propane torch. I work extensively in stainless with the aid of a local fabrication shop that has the larger ironworking tools like shears, rolls and pinch presses.
> Michael Wendt
> call me at 1-800-554-3724 or email me at wendtpot@lewiston.com
> . To see my machines visit http://users.lewiston.com/wendtpot
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
--
Earl Brunner
http://coyote.accessnv.com/bruec
mailto:bruec@anv.net
| |
|
