Linda Blossom on sat 28 oct 00
Hello all,
I have a problem with my skutt 1227, which has an electronic =
controller. When I start it, it starts, going on and off, shorter times =
between the on and off than usual, gets about four degrees (C) and then =
the temperature flashes but there is no error message. Can anyone tell =
me where to begin in figuring out what is wrong?=20
Thanks,=20
Linda
Ithaca, NY
Candise Flippin on sun 29 oct 00
Linda,
Call the technical support group at Skutt. They have always been able to
answer my questions.
Thanks, Candise in San Diego
Shirley Tschannen on sun 29 oct 00
Best to call Skutt..
Linda Blossom wrote:
> Hello all,
>
> I have a problem with my skutt 1227, which has an electronic controller. When I start it, it starts, going on and off, shorter times between the on and off than usual, gets about four degrees (C) and then the temperature flashes but there is no error message. Can anyone tell me where to begin in figuring out what is wrong?
>
> Thanks,
> Linda
> Ithaca, NY
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
Arnold Howard on mon 30 oct 00
Linda,
Is the temperature display dim? Does the controller fire normally? Did you
recently change the transformer?
Arnold Howard
Paragon
--- Linda Blossom wrote:
> Hello all,
>
> I have a problem with my skutt 1227, which has an electronic controller.
> When I start it, it starts, going on and off, shorter times between the on
> and off than usual, gets about four degrees (C) and then the temperature
> flashes but there is no error message. Can anyone tell me where to begin
> in figuring out what is wrong?
>
> Thanks,
> Linda
> Ithaca, NY
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
Linda Blossom on mon 30 oct 00
Arnold,
Thanks for answering. No the display is not dim. The controller tries =
to fire, cycling on and off, but the elements only get a little warm and =
then the display begins to flash. I did not change anything since the =
last firing. =20
Linda
----- Original Message -----=20
From: Arnold Howard=20
To: CLAYART@LSV.CERAMICS.ORG=20
Sent: Monday, October 30, 2000 3:15 PM
Subject: Re: skutt problem
Linda,
Is the temperature display dim? Does the controller fire normally? Did =
you
recently change the transformer?
Arnold Howard
Paragon
--- Linda Blossom wrote:
> Hello all,
>
> I have a problem with my skutt 1227, which has an electronic =
controller.
> When I start it, it starts, going on and off, shorter times between =
the on
> and off than usual, gets about four degrees (C) and then the =
temperature
> flashes but there is no error message. Can anyone tell me where to =
begin
> in figuring out what is wrong?
>
> Thanks,
> Linda
> Ithaca, NY
>
>
=
_________________________________________________________________________=
_____
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your =
subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
=
_________________________________________________________________________=
_____
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at =
melpots@pclink.com.
Arnold Howard on tue 31 oct 00
Hi Linda,
Do you hear the normal clicking noise? (The sound of the relays sending power
to the elements.)
When the display begins to flash, what message do you see?
I'm curious about your controller problem, because I don't think I've ever
heard of this type of problem before.
Arnold Howard
Paragon
--- Linda Blossom wrote:
> Arnold,
>
> Thanks for answering. No the display is not dim. The controller tries to
> fire, cycling on and off, but the elements only get a little warm and then
> the display begins to flash. I did not change anything since the last
> firing.
> Linda
> ----- Original Message -----
> From: Arnold Howard
> To: CLAYART@LSV.CERAMICS.ORG
> Sent: Monday, October 30, 2000 3:15 PM
> Subject: Re: skutt problem
>
>
> Linda,
>
> Is the temperature display dim? Does the controller fire normally? Did
> you
> recently change the transformer?
>
> Arnold Howard
> Paragon
>
> --- Linda Blossom wrote:
> > Hello all,
> >
> > I have a problem with my skutt 1227, which has an electronic
> controller.
> > When I start it, it starts, going on and off, shorter times between the
> on
> > and off than usual, gets about four degrees (C) and then the
> temperature
> > flashes but there is no error message. Can anyone tell me where to
> begin
> > in figuring out what is wrong?
> >
> > Thanks,
> > Linda
> > Ithaca, NY
> >
> >
>
>
______________________________________________________________________________
> > Send postings to clayart@lsv.ceramics.org
> >
> > You may look at the archives for the list or change your subscription
> > settings from http://www.ceramics.org/clayart/
> >
> > Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Messenger - Talk while you surf! It's FREE.
> http://im.yahoo.com/
>
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
b. lev on mon 7 nov 05
About your skutt, problem. The controller can provide readout in =
Centigrade as well as Fahrenheit. Could it be that a button on the =
controller was pressed and you're getting the converted to C read out? =
Check your manual for how to toggle between the two. Hopefully that is =
the problem, which not a serious one, otherwise i would call Skutt
good luck
Bev
| |
|
