vince pitelka on sun 19 nov 00
Sometimes our workshop presenters will mix up a dynamite glaze, and leave it
here without leaving the recipe. Someone last summer left a rich black
satin cone 10 reduction glaze called Satin Doll, and my students love it.
It seems to be very reliable, and looks good with a lot of our other glazes.
It is obviously loaded with oxides, so we do not use it on food contact
surfaces, especially since I do not have a recipe. But we just ran out, so
if any of you have a recipe for a glaze called satin doll I would appreciate
it if you would post it on the list.
Thanks and best wishes -
- Vince
Vince Pitelka
Home - vpitelka@dekalb.net
615/597-5376
Work - wpitelka@tntech.edu
615/597-6801 ext. 111, fax 615/597-6803
Appalachian Center for Crafts
Tennessee Technological University
1560 Craft Center Drive, Smithville TN 37166
http://www.craftcenter.tntech.edu/
Linfield College on mon 20 nov 00
on 11/19/00 9:38 PM, vince pitelka at vpitelka@DEKALB.NET wrote:
> Sometimes our workshop presenters will mix up a dynamite glaze, and leave it
> here without leaving the recipe. Someone last summer left a rich black
> satin cone 10 reduction glaze called Satin Doll, and my students love it.
> It seems to be very reliable, and looks good with a lot of our other glazes.
> It is obviously loaded with oxides, so we do not use it on food contact
> surfaces, especially since I do not have a recipe. But we just ran out, so
> if any of you have a recipe for a glaze called satin doll
SATIN DOLL is a Val Cushing glaze - he's a jazz lover, note the name . This
is the revised version:
Satin Doll Cone 10 Reduction Opaque
40 Red Art
15 Nepheline Syenite
10 Barium Carbonate
15 Talc
10 Whiting
10 Flint (silica)
Add:
chrome oxide 1%
red iron 2%
Manganese Dioxide 2%
Cobalt Carbonate 2%
If you use granular manganese rather than the powder form, you will get
little crystalline flecks on the surface. Most attractive. NOT, obviously,
a liner glaze, though the glaze HAS been tested.
regards
Dannon Rhudy
John Palmquist on mon 20 nov 00
This glaze is used at Wesleyan Potters and is a wonderful satin black
glaze. It is from Val Cushing's Handbook-enjoy!
Diane
V.C. Satin Doll Black-Rev.
Red Art Clay 40
Neph. Sye. 15
Barium Carb. 10
Talc 15
Whiting 10
Flint 10
--------------
Total 100
Also Add:
Chrome Ox. 1
red Iron Ox. 2
Manganese Dioxide 2
Cobalt Carb. 2
Needs 9.5 or cone 10 for best satin smooth results
-----Original Message-----
From: vince pitelka
To: CLAYART@LSV.CERAMICS.ORG
Date: Monday, November 20, 2000 11:36 AM
Subject: Seeking Satin Doll
>Sometimes our workshop presenters will mix up a dynamite glaze, and leave
it
>here without leaving the recipe. Someone last summer left a rich black
>satin cone 10 reduction glaze called Satin Doll, and my students love it.
>It seems to be very reliable, and looks good with a lot of our other
glazes.
>It is obviously loaded with oxides, so we do not use it on food contact
>surfaces, especially since I do not have a recipe. But we just ran out,
so
>if any of you have a recipe for a glaze called satin doll I would
appreciate
>it if you would post it on the list.
>Thanks and best wishes -
>- Vince
>
>Vince Pitelka
>Home - vpitelka@dekalb.net
>615/597-5376
>Work - wpitelka@tntech.edu
>615/597-6801 ext. 111, fax 615/597-6803
>Appalachian Center for Crafts
>Tennessee Technological University
>1560 Craft Center Drive, Smithville TN 37166
>http://www.craftcenter.tntech.edu/
>
>___________________________________________________________________________
___
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
>
Helllll@AOL.COM on tue 21 nov 00
Hello Vince and others...
I've waited to see if any one was going to reply to this... I haven't seen
any, unless I missed something... Satin Doll glaze is in the GLAZEBASE data
bank ... there is also a revision ... for those of you who don't know what
GLAZEBASE is, it is a searchable glaze data bank ... there is also CLAYART
glaze data bank ... to find out more go to this really useful web site
http://art.sdsu.edu/ceramicsweb/
Pete in Oklahoma...
ILENE MAHLER on tue 21 nov 00
Here goes...Kona f-4 spa..20...Custer Spa.20..Dolomite
..15..Talc..13..Whitning.2..Ball clay.10..Flint.20...Chrome
oxide..1..Riox#..Mang diox.2.Cobalt ox.3 I'm glad you liked the glaze I
do use it for food the trays with cantolopue and prosuto are a picture
all food with color look great on a black presentation..Ilene in Conn
who is still looking for a roomate and a driving buddy to Charlotte....
vince pitelka wrote:
>
> Sometimes our workshop presenters will mix up a dynamite glaze, and leave it
> here without leaving the recipe. Someone last summer left a rich black
> satin cone 10 reduction glaze called Satin Doll, and my students love it.
> It seems to be very reliable, and looks good with a lot of our other glazes.
> It is obviously loaded with oxides, so we do not use it on food contact
> surfaces, especially since I do not have a recipe. But we just ran out, so
> if any of you have a recipe for a glaze called satin doll I would appreciate
> it if you would post it on the list.
> Thanks and best wishes -
> - Vince
>
> Vince Pitelka
> Home - vpitelka@dekalb.net
> 615/597-5376
> Work - wpitelka@tntech.edu
> 615/597-6801 ext. 111, fax 615/597-6803
> Appalachian Center for Crafts
> Tennessee Technological University
> 1560 Craft Center Drive, Smithville TN 37166
> http://www.craftcenter.tntech.edu/
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at melpots@pclink.com.
Ron Roy on tue 21 nov 00
No - not a liner glaze - it's low in both alumina and silica and will leach
Barium among other things.
Here is a revision with Strontium - I'll bet you will not be able to see
any difference - and the expansion is a bit lower.
Red Art - 41.0
Neph Sy - 15.0
Strontium Carb - 8.0
Talc - 15.0
Whiting - 10.0
Silica - 11.0
Total 100.0
It's still not a durable glaze for cone 10 and may change colour when in
contact with some foods given enough time.
RR
>Satin Doll Cone 10 Reduction Opaque
>
>40 Red Art
>15 Nepheline Syenite
>10 Barium Carbonate
>15 Talc
>10 Whiting
>10 Flint (silica)
>
>Add:
>
>chrome oxide 1%
>red iron 2%
>Manganese Dioxide 2%
>Cobalt Carbonate 2%
>
>If you use granular manganese rather than the powder form, you will get
>little crystalline flecks on the surface. Most attractive. NOT, obviously,
>a liner glaze, though the glaze HAS been tested.
Ron Roy
93 Pegasus Trail
Scarborough
Ontario, Canada
M1G 3N8
Evenings 416-439-2621
Fax 416-438-7849
| |
|
