Tony Ferguson on wed 16 may 01
Hi,
I'm experimenting with some single fired porcelain
clay bodies. Does anyone have a good single fired
(either bone dry or leather hard glaze state)
porcelain clay body? I mainly use shinos and still
looking for a good oribe green and tenmoku. Thank
you.
Tony Duluth, MN
=====
--Tony Ferguson, fergyart@yahoo.com315 N. Lake Ave. Apt 401Duluth, MN 55806(218) 727-6339Looking to see, buy or barter artwork go to:http://acad.uwsuper.edu/www/aferguso/fergyart.htm
jcullen on wed 16 may 01
I've been single firing MCS from Tucker's Pottery Supplies, Inc. in Ontario,
Canada. I fire to Cone 6 but I they have Cone 10 Porcelain 10-86, 10-85,
10-80, H.H.P and Cone 8 CSP and Porc 5. The Cone 6 Porcelains are MCS, Mid
Porc 5, and 6-50.
Good Luck.
----- Original Message -----
From: "Tony Ferguson"
To:
Sent: Wednesday, May 16, 2001 3:55 PM
Subject: single fired porcelain cone 10+ needed
> Hi,
>
> I'm experimenting with some single fired porcelain
> clay bodies. Does anyone have a good single fired
> (either bone dry or leather hard glaze state)
> porcelain clay body? I mainly use shinos and still
> looking for a good oribe green and tenmoku. Thank
> you.
>
> Tony Duluth, MN
>
> =====
> --Tony Ferguson, fergyart@yahoo.com315 N. Lake Ave. Apt 401Duluth, MN
55806(218) 727-6339Looking to see, buy or barter artwork go
to:http://acad.uwsuper.edu/www/aferguso/fergyart.htm
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Wayne Matthews on thu 17 may 01
Tony,
I've used this one successfully for years with small
to large pots:
#6 Tile - 50
Kaopaque 20- 25
F-4 spar - 40
Neph Sy - 20
Flint 200 - 20
Molocite - 5
Bentonite - 5
Also a variation with
Kaopaque 20 - 10
Tenn #1 - 15
I've also used Standard Ceramics Porcelain 130 with
good results. You can use Kyanite in place of the
Molocite, though it's not as white.
Molocite is a white grog, made from porcelain.
Enjoy!
--- Tony Ferguson wrote:
> Hi,
>
> I'm experimenting with some single fired porcelain
> clay bodies. Does anyone have a good single fired
> (either bone dry or leather hard glaze state)
> porcelain clay body? I mainly use shinos and still
> looking for a good oribe green and tenmoku. Thank
> you.
>
> Tony Duluth, MN
>
> =====
> --Tony Ferguson, fergyart@yahoo.com315 N. Lake Ave.
> Apt 401Duluth, MN 55806(218) 727-6339Looking to see,
> buy or barter artwork go
> to:http://acad.uwsuper.edu/www/aferguso/fergyart.htm
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
=====
Wayne Matthews
Innvironments, Potter and Sulptor
Ojai, California
Prostate Cancer Initiate
innvironments@yahoo.com
wayne@innfusion.com
www.innfusion.com
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
Brian Molanphy on thu 17 may 01
tony wrote:
> > Hi,
> >
> > I'm experimenting with some single fired porcelain
> > clay bodies. Does anyone have a good single fired
> > (either bone dry or leather hard glaze state)
> > porcelain clay body? I mainly use shinos and still
> > looking for a good oribe green and tenmoku. Thank
> > you.
>
>
a student here at colorado college has used an orange-flashing porcelain
from archie bray. he sez bray just started making it and it didn't have a
name when he bought it. it has a lovely color (unglazed) in the soda kiln.
anybody know why? alberta slip, maybe? if you don't have a contact for bray,
contact me off-list and i will find a phone # for you.
Tony Ferguson on thu 17 may 01
Hey Wayne,
Thanks! Do you glaze leather or bone dry with this
body?
--- Wayne Matthews wrote:
> Tony,
>
> I've used this one successfully for years with small
> to large pots:
>
> #6 Tile - 50
> Kaopaque 20- 25
> F-4 spar - 40
> Neph Sy - 20
> Flint 200 - 20
> Molocite - 5
> Bentonite - 5
>
> Also a variation with
> Kaopaque 20 - 10
> Tenn #1 - 15
>
> I've also used Standard Ceramics Porcelain 130 with
> good results. You can use Kyanite in place of the
> Molocite, though it's not as white.
>
> Molocite is a white grog, made from porcelain.
>
> Enjoy!
>
>
> --- Tony Ferguson wrote:
> > Hi,
> >
> > I'm experimenting with some single fired porcelain
> > clay bodies. Does anyone have a good single fired
> > (either bone dry or leather hard glaze state)
> > porcelain clay body? I mainly use shinos and
> still
> > looking for a good oribe green and tenmoku. Thank
> > you.
> >
> > Tony Duluth, MN
> >
> > =====
> > --Tony Ferguson, fergyart@yahoo.com315 N. Lake
> Ave.
> > Apt 401Duluth, MN 55806(218) 727-6339Looking to
> see,
> > buy or barter artwork go
> >
> to:http://acad.uwsuper.edu/www/aferguso/fergyart.htm
> >
> >
>
______________________________________________________________________________
> > Send postings to clayart@lsv.ceramics.org
> >
> > You may look at the archives for the list or
> change
> > your subscription
> > settings from http://www.ceramics.org/clayart/
> >
> > Moderator of the list is Mel Jacobson who may be
> > reached at melpots@pclink.com.
>
>
> =====
> Wayne Matthews
> Innvironments, Potter and Sulptor
> Ojai, California
> Prostate Cancer Initiate
> innvironments@yahoo.com
> wayne@innfusion.com
> www.innfusion.com
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - buy the things you want at great
> prices
> http://auctions.yahoo.com/
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
=====
--Tony Ferguson, fergyart@yahoo.com315 N. Lake Ave. Apt 401Duluth, MN 55806(218) 727-6339Looking to see, buy or barter artwork go to:http://acad.uwsuper.edu/www/aferguso/fergyart.htm
Wayne Matthews on mon 21 may 01
Bone Dry.
--- Tony Ferguson wrote:
> Hey Wayne,
>
> Thanks! Do you glaze leather or bone dry with this
> body?
>
>
> --- Wayne Matthews wrote:
> > Tony,
> >
> > I've used this one successfully for years with
> small
> > to large pots:
> >
> > #6 Tile - 50
> > Kaopaque 20- 25
> > F-4 spar - 40
> > Neph Sy - 20
> > Flint 200 - 20
> > Molocite - 5
> > Bentonite - 5
> >
> > Also a variation with
> > Kaopaque 20 - 10
> > Tenn #1 - 15
> >
> > I've also used Standard Ceramics Porcelain 130
> with
> > good results. You can use Kyanite in place of the
> > Molocite, though it's not as white.
> >
> > Molocite is a white grog, made from porcelain.
> >
> > Enjoy!
> >
> >
> > --- Tony Ferguson wrote:
> > > Hi,
> > >
> > > I'm experimenting with some single fired
> porcelain
> > > clay bodies. Does anyone have a good single
> fired
> > > (either bone dry or leather hard glaze state)
> > > porcelain clay body? I mainly use shinos and
> > still
> > > looking for a good oribe green and tenmoku.
> Thank
> > > you.
> > >
> > > Tony Duluth, MN
> > >
> > > =====
> > > --Tony Ferguson, fergyart@yahoo.com315 N. Lake
> > Ave.
> > > Apt 401Duluth, MN 55806(218) 727-6339Looking to
> > see,
> > > buy or barter artwork go
> > >
> >
> to:http://acad.uwsuper.edu/www/aferguso/fergyart.htm
> > >
> > >
> >
>
______________________________________________________________________________
> > > Send postings to clayart@lsv.ceramics.org
> > >
> > > You may look at the archives for the list or
> > change
> > > your subscription
> > > settings from http://www.ceramics.org/clayart/
> > >
> > > Moderator of the list is Mel Jacobson who may be
> > > reached at melpots@pclink.com.
> >
> >
> > =====
> > Wayne Matthews
> > Innvironments, Potter and Sulptor
> > Ojai, California
> > Prostate Cancer Initiate
> > innvironments@yahoo.com
> > wayne@innfusion.com
> > www.innfusion.com
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Auctions - buy the things you want at great
> > prices
> > http://auctions.yahoo.com/
> >
> >
>
______________________________________________________________________________
> > Send postings to clayart@lsv.ceramics.org
> >
> > You may look at the archives for the list or
> change
> > your subscription
> > settings from http://www.ceramics.org/clayart/
> >
> > Moderator of the list is Mel Jacobson who may be
> > reached at melpots@pclink.com.
>
>
> =====
> --Tony Ferguson, fergyart@yahoo.com315 N. Lake Ave.
> Apt 401Duluth, MN 55806(218) 727-6339Looking to see,
> buy or barter artwork go
> to:http://acad.uwsuper.edu/www/aferguso/fergyart.htm
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
=====
Wayne Matthews
Innvironments, Potter and Sculptor
Ojai, California
Prostate Cancer Initiate
innvironments@yahoo.com
wayne@innfusion.com
www.innfusion.com
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
| |
|
