Candise Flippin on wed 27 jun 01
Now that the Dragon is a huge success, I am selling old faithful. In
combination, this setup fired consistently, bisque to 05, high to 2150 F,
and glaze to 04.
Crusader Model 274S, Cone 10, 42amp, 240V, Single Phase, Serial #A938
It has 6 Switches with settings Lo 1 thru 7 Hi and a Model LT3 KilnSitter
with Hours of Estimated Firing Time. 10 Sided, 23" wide x 27" high. I bought
this kiln used in April, 1987. It has never failed me. $200.
Skutt Kilnmaster Controller - Ramp/Hold programps with up to 8 segments,
Encapsulated Type K thermocoupler. Recently upgraded. $500
Skutt Envirovent - downdraft sits neatly under the kiln. Like new. $300
These are located in Vista. Call me at 760 945-7568 if interested.
Candise Flippin
Also, my Mom has a Paragon Model A-88B that was used to fired decals onto
mugs the elements were replaced by my Dad and the top switch will not work
on high. I ask Arnold Howard at Paragon about it and his best guess is that
the wires are crossed. My parents have all the manuals and it's in great
shape otherwise. Arnold said in mint condition it should be worth $125.
They are asking $50 as is. It has been fired many times, but all at low
fire, and my parents take very good care of things. This is a very good
deal. The kiln is in Santee, (that's East County San Diego). Call Mary Coley
at 619 449-2532 if you are interested.
Thanks again, Candise
Wayne Matthews on thu 12 jul 01
Do you still have this kiln?
on 6/27/01 4:56 PM, Candise Flippin at candise@FINEARTSCULPTURE.COM wrote:
> Now that the Dragon is a huge success, I am selling old faithful. In
> combination, this setup fired consistently, bisque to 05, high to 2150 F,
> and glaze to 04.
>
> Crusader Model 274S, Cone 10, 42amp, 240V, Single Phase, Serial #A938
> It has 6 Switches with settings Lo 1 thru 7 Hi and a Model LT3 KilnSitter
> with Hours of Estimated Firing Time. 10 Sided, 23" wide x 27" high. I bought
> this kiln used in April, 1987. It has never failed me. $200.
>
> Skutt Kilnmaster Controller - Ramp/Hold programps with up to 8 segments,
> Encapsulated Type K thermocoupler. Recently upgraded. $500
>
> Skutt Envirovent - downdraft sits neatly under the kiln. Like new. $300
>
> These are located in Vista. Call me at 760 945-7568 if interested.
>
> Candise Flippin
>
> Also, my Mom has a Paragon Model A-88B that was used to fired decals onto
> mugs the elements were replaced by my Dad and the top switch will not work
> on high. I ask Arnold Howard at Paragon about it and his best guess is that
> the wires are crossed. My parents have all the manuals and it's in great
> shape otherwise. Arnold said in mint condition it should be worth $125.
> They are asking $50 as is. It has been fired many times, but all at low
> fire, and my parents take very good care of things. This is a very good
> deal. The kiln is in Santee, (that's East County San Diego). Call Mary Coley
> at 619 449-2532 if you are interested.
>
> Thanks again, Candise
>
> ______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
| |
|
