Craig Dunn Clark on mon 2 jul 01
Tommy, contact me off the thread. I'd like to come by the pottery for a
visit before the end of the summer.
Craig Dunn Clark
619 East 11 1/2 st
Houston, Texas 77008
----- Original Message -----
From: "Tommy Humphries"
Sent: Thursday, July 05, 2001 6:07 PM
Subject: Re: Raku Firing Problem
> Sounds like the glaze was too thin on the outside...did you pour the
> and brush the outside? I had the same results with a Raku firing once and
> that was the cause.
> ----- Original Message -----
> Sent: Thursday, July 05, 2001 5:22 AM
> Subject: Raku Firing Problem
> > I did a raku firing yesterday . Nice crackle on the inside,
> > but no crackle on the outside. I
> > have lots of black dots that I figure is pinholing and the blackened
> > is showing through. I'm puzzled as to why this is happening
> Send postings to email@example.com
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
> Moderator of the list is Mel Jacobson who may be reached at