keramik on sun 9 sep 01
Hello everybody,
just thought I would run this past Clayart members in the hope somebody =
might be able to help.
Finally, after years of getting up in the middle of the night, to mind =
the kiln,
I have been able to get hold of a 'Cambridge Process Controls 401',
electronic kiln controllers, which I bought off a local school,=20
can anybody tell me how to set the thing or give me a contact address =
where I can get hold of instructions.=20
I have no experience with electronic controls at all.
looking forward to the wonderful world of technology which hopefully =
will let me have a lay-in soon.
Angela
Essex, UK
Avril Farley on sun 9 sep 01
Try the following contact at Cambridge
lisa@valeader.co.uk
Avril in the Forest of Dean, UK
----- Original Message -----
From: "keramik"
To:
Sent: Sunday, September 09, 2001 12:03 PM
Subject: cambridge controls
Hello everybody,
just thought I would run this past Clayart members in the hope somebody
might be able to help.
Finally, after years of getting up in the middle of the night, to mind the
kiln,
I have been able to get hold of a 'Cambridge Process Controls 401',
electronic kiln controllers, which I bought off a local school,
can anybody tell me how to set the thing or give me a contact address where
I can get hold of instructions.
I have no experience with electronic controls at all.
looking forward to the wonderful world of technology which hopefully will
let me have a lay-in soon.
Angela
Essex, UK
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
David Coggins on mon 10 sep 01
Re Cambridge Controllers.
My web page has links to many sites about kilns and controllers, including
Cambridge.
Try http://www.valeader.co.uk/page11.html
Regards
Dave
David & Elaine Coggins
dcoggins@bigpond.com
http://www.users.bigpond.com/dcoggins
> -----Original Message-----
> From: Ceramic Arts Discussion List [mailto:CLAYART@LSV.CERAMICS.ORG]On
> Behalf Of keramik
> Sent: Sunday, 9 September 2001 9:04
> To: CLAYART@LSV.CERAMICS.ORG
> Subject: cambridge controls
>
>
> Hello everybody,
>
> just thought I would run this past Clayart members in the hope
> somebody might be able to help.
>
> Finally, after years of getting up in the middle of the night, to
> mind the kiln,
> I have been able to get hold of a 'Cambridge Process Controls 401',
> electronic kiln controllers, which I bought off a local school,
> can anybody tell me how to set the thing or give me a contact
> address where I can get hold of instructions.
> I have no experience with electronic controls at all.
>
> looking forward to the wonderful world of technology which
> hopefully will let me have a lay-in soon.
>
> Angela
> Essex, UK
>
> __________________________________________________________________
> ____________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
> melpots@pclink.com.
>
| |
|
