Joanne Van Bezooyen on sat 22 sep 01
Happy Saturday to all.
I am working on an order that requires a glaze that will look like the =
foam on the water's edge of an ocean wave as it runs up the beach. I =
use a cone 5 porcelain clay for these tiles as they will go underwater. =
Do any of you have suggestions?
Joanne L. Van Bezooyen
Art Gecko Designs
11220 E. Via Madre
Tucson, AZ 85749
Studio:(520) 760-1584 voice or fax
Home: (520) 749--1685
http://artgeckotile.com
Ababi on sat 22 sep 01
Please enter to my site, watch my stoneware as well as glaze test carefully.
if the is anything you like right me on line or off line and I shall offer
you.
Ababa Sharon
http://members4.clubphoto.com/ababi306910/
----- Original Message -----
From: "Joanne Van Bezooyen"
To:
Sent: Saturday, September 22, 2001 06:55
Subject: foam glaze ^5/6
Happy Saturday to all.
I am working on an order that requires a glaze that will look like the foam
on the water's edge of an ocean wave as it runs up the beach. I use a cone
5 porcelain clay for these tiles as they will go underwater.
Do any of you have suggestions?
Joanne L. Van Bezooyen
Art Gecko Designs
11220 E. Via Madre
Tucson, AZ 85749
Studio:(520) 760-1584 voice or fax
Home: (520) 749--1685
http://artgeckotile.com
____________________________________________________________________________
__
Send postings to clayart@lsv.ceramics.org
You may look at the archives for the list or change your subscription
settings from http://www.ceramics.org/clayart/
Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Jocelyn McAuley on sat 22 sep 01
Hi Joanne
What a great challenge to throw out to us! I love glazes with such
concrete descriptions.
In testing my macrocrystalline glazes I found that adding 5% silicon
carbide yields a bubbly, foamy look. With 1% iron, I had a campfire
marshmallow test tile, big and puffy- beofre it falls off your stick. I
believe what I had stumbled on is a step in making crater glazes.
So, maybe run a test series adding 2%-7% silicon carbide to your favorite
clear.
Good Luck
--
Jocelyn McAuley ><<'> jocie@worlddomination.net
Eugene, Oregon
Alisa og Claus Clausen on mon 24 sep 01
Hi Joanne,
Also what I learned from Ababi,
Take your favorite glaze and add 10,20,30% up to 50% Magnesium oxide.
I found with the 30% plus, the glazes got bubbly and crawled, not too much
balled.
In the archives look up
Crawl and Ball glazes. There are several types there. Otherwise, write to
me off list, and I will
send you the recipes I have tested for that texture.
Best regards,
Alisa in DenmakrAt 16:00 22-09-01 -0700, you wrote:
>Hi Joanne
>
>What a great challenge to throw out to us! I love glazes with such
>concrete descriptions.
>
>In testing my macrocrystalline glazes I found that adding 5% silicon
>carbide yields a bubbly, foamy look. With 1% iron, I had a campfire
>marshmallow test tile, big and puffy- beofre it falls off your stick. I
>believe what I had stumbled on is a step in making crater glazes.
>
>So, maybe run a test series adding 2%-7% silicon carbide to your favorite
>clear.
>
>
>Good Luck
>
>
>--
>Jocelyn McAuley ><<'> jocie@worlddomination.net
>Eugene, Oregon
>
>______________________________________________________________________________
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.
| |
|
