Paul Taylor on sat 8 dec 01
Dear Bob
It Is probably as easy to phone you but I thought some other potters may
be as interested as I in the new plastic pipe.
How much pressure does it handle? Does it go all the way from tank to
burner ? Is it as self supporting as the galvanic pipe ? Does it bend ? Do
you thread it or do you use compression joints . More importantly can you
buy it or do you have to be an accredited fitter ?
-- Regards Paul .
http://www.anu.ie/westportpottery
> From: Rare - Earth - Design
> Reply-To: Ceramic Arts Discussion List
> Date: Fri, 7 Dec 2001 22:20:38 -0000
> To: CLAYART@LSV.CERAMICS.ORG
> Subject: Re: working with gas lines...
>
> Paul,
> I do all my own plumbing and electrical work, you probably know
> things
> are changing fast in the world of pipes. Just been into my local supplier
> and
> discovered that right from the bulk tank, to wherever you want it to end,
> is
> now done by one length of a new type of, I call it plastic, pipe. No more
> pipe
> threading, well very little and no worries about having to maybe dig up a
> whole
> pipeline to find a leaking pipe or join. Just like copper the stock of
> black iron
> pipes carried by suppliers has suddenly got very low, and some young
> plumbers will openly tell you they know nothing about running copper pipes.
> The job is getting easier and faster but the charges remain high.
> Regards,
> Bob Hollis
> ----- Original Message -----
> From: "Paul Taylor"
> To:
>
Ed Kraft on sun 9 dec 01
Paul,
I used a flexible 3/4" pipe from my 250 gal. propane tank to the pressure
regulator mounted on the side of my shop. Written on the side of the pipe is
the following. Ultratite (brand) Aflex 3/4" (type F) Sunlight Resistant.
Hope this helps. Ed
Earth Arrangements
2109 39th St
Bellingham, WA 98226
360 734- 6839
eartharr@msn.com
www.eartharrangements.com
----- Original Message -----
From: "Paul Taylor"
To:
Sent: Saturday, December 08, 2001 2:49 PM
Subject: Re: working with gas lines./.Bob.
> Dear Bob
>
> It Is probably as easy to phone you but I thought some other potters may
> be as interested as I in the new plastic pipe.
>
> How much pressure does it handle? Does it go all the way from tank to
> burner ? Is it as self supporting as the galvanic pipe ? Does it bend ? Do
> you thread it or do you use compression joints . More importantly can you
> buy it or do you have to be an accredited fitter ?
>
>
> -- Regards Paul .
>
> http://www.anu.ie/westportpottery
>
> > From: Rare - Earth - Design
> > Reply-To: Ceramic Arts Discussion List
> > Date: Fri, 7 Dec 2001 22:20:38 -0000
> > To: CLAYART@LSV.CERAMICS.ORG
> > Subject: Re: working with gas lines...
> >
> > Paul,
> > I do all my own plumbing and electrical work, you probably know
> > things
> > are changing fast in the world of pipes. Just been into my local
supplier
> > and
> > discovered that right from the bulk tank, to wherever you want it to
end,
> > is
> > now done by one length of a new type of, I call it plastic, pipe. No
more
> > pipe
> > threading, well very little and no worries about having to maybe dig up
a
> > whole
> > pipeline to find a leaking pipe or join. Just like copper the stock of
> > black iron
> > pipes carried by suppliers has suddenly got very low, and some young
> > plumbers will openly tell you they know nothing about running copper
pipes.
> > The job is getting easier and faster but the charges remain high.
> > Regards,
> > Bob Hollis
> > ----- Original Message -----
> > From: "Paul Taylor"
> > To:
> >
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
| |
|
