Tony Ferguson on tue 29 jan 02
If people are interested, I thought it would be neat (it's our favorite work
in Minnesota!) to have pictures of everyone's kilns that they have built in
one place so that anyone who is thinking of building a kiln can easily look
in one place to see many designs. So, if you are interested, send pics of
the kiln, plans, whatever and I will create a page on my website.
Tony Ferguson
www.aquariusartgallery.com
----- Original Message -----
From: Diane Woloshyn
To:
Sent: Sunday, January 27, 2002 11:44 AM
Subject: Re: Glaze test for Falls Creek Shino and cooling rate
> Marianne,
>
> I meant the glaze getting old in the glaze bucket, not after the pieces
are
> fired. Have used this glaze on a lot of outdoor pieces (lights and
fountains)
> and have seen no evidence of deterioration.
>
> My cooling rate on this glaze has been very fast, just shut the kiln off.
> Since it has only 2 1/2 " soft brick, it cools very fast. Am going to try
> ramp down cooling and see if it makes any difference. Will post the
results.
>
> Diane Florida Bird Lady
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
Maid O'Mud on tue 29 jan 02
I tried your e-mail, but rec'd the "permanent fatal errors" message. Please
go to the link below, and follow to "woodkiln pics".
Thank you
Sam - Maid O'Mud Pottery
Melbourne, Ontario CANADA
"First, the clay told me what to do.
Then, I told the clay what to do.
Now, we co-operate."
sam 1994
http://www.ody.ca/~scuttell/
If people are interested, I thought it would be neat (it's our favorite work
in Minnesota!) to have pictures of everyone's kilns that they have built in
one place so that anyone who is thinking of building a kiln can easily look
in one place to see many designs. So, if you are interested, send pics of
the kiln, plans, whatever and I will create a page on my website.
Tony Ferguson
lisa kzr on tue 29 jan 02
HI Folks!
This is where I will jumb in! I guess it's about time
that iI do! I'm new to this list and I am full of
questions! Before too long you all will probably want
me to shut up!
I hope that this website site goes over well because I
would love to see it! I am interested in getting
involved in ceramics once again. I have been out of it
for many, many years. But I have never lost or
wandered far from the love of it! But I am very wet
behind the ears and will want plus need to take a
refresher class in it. Right now I lack having any of
the equipmenrt and was wanderinghow to go about it
all. Like a kiln and a wheel.
This is all for now!
Thanks!
Lisa
--- Tony Ferguson wrote:
> If people are interested, I thought it would be neat
> (it's our favorite work
> in Minnesota!) to have pictures of everyone's kilns
> that they have built in
> one place so that anyone who is thinking of building
> a kiln can easily look
> in one place to see many designs. So, if you are
> interested, send pics of
> the kiln, plans, whatever and I will create a page
> on my website.
>
> Tony Ferguson
> www.aquariusartgallery.com
>
>
> ----- Original Message -----
> From: Diane Woloshyn
> To:
> Sent: Sunday, January 27, 2002 11:44 AM
> Subject: Re: Glaze test for Falls Creek Shino and
> cooling rate
>
>
> > Marianne,
> >
> > I meant the glaze getting old in the glaze bucket,
> not after the pieces
> are
> > fired. Have used this glaze on a lot of outdoor
> pieces (lights and
> fountains)
> > and have seen no evidence of deterioration.
> >
> > My cooling rate on this glaze has been very fast,
> just shut the kiln off.
> > Since it has only 2 1/2 " soft brick, it cools
> very fast. Am going to try
> > ramp down cooling and see if it makes any
> difference. Will post the
> results.
> >
> > Diane Florida Bird Lady
> >
> >
>
____________________________________________________________________________
> __
> > Send postings to clayart@lsv.ceramics.org
> >
> > You may look at the archives for the list or
> change your subscription
> > settings from http://www.ceramics.org/clayart/
> >
> > Moderator of the list is Mel Jacobson who may be
> reached at
> melpots@pclink.com.
>
>
______________________________________________________________________________
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change
> your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be
> reached at melpots@pclink.com.
__________________________________________________
Do You Yahoo!?
Great stuff seeking new owners in Yahoo! Auctions!
http://auctions.yahoo.com
| |
|
