search  current discussion  categories  kilns & firing - gas 

new propane valves (pulseing flame...)

updated thu 4 apr 02

 

Philip Poburka on wed 3 apr 02


Curious!

I do not have an idea to account for it...

Hmmmm...

Phil

----- Original Message -----
From: "Snail Scott"
To:
Sent: Wednesday, April 03, 2002 7:59 AM
Subject: Re: New propane valves


> At 06:09 PM 4/2/02 -0800, Phil wrote:
> ...liquid Propane or similar similar sloshes and contacts the sides of the
> >Tank in a rythmic way, and in general is agitated...
>
> >Was the person moveing the Tank around while they did their chores?
>
>
> Nope.
>
> The guy who was using it was physically handicapped,
> and couldn't have moved the tank at all even if he'd
> tried. And I'm the one that picked up the tank from the
> swap station, and carried the tank out to the dock
> where the guy was working, and it felt full to me. I
> was watching him work; the tank was never moved at all.
> (The torch worked fine on the previous tank before the
> swap, and it worked fine the next day, too, when it had
> been emptied somewhat by the previous day's efforts.)
>
> -Snail
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.