Carol Tripp on sat 20 apr 02
I have a nice glaze, ^6 ox, that's yellow.
BUTTER SATIN GLOSS
36 custer feldspar
20 Frit 3124
16 Talc
20 EPK: I calcine half of this so it's 10 regular and 8.6 calcined
8 Wollastonite
3% Tin Oxide
5% rutile (if you want a lighter yellow, use 3%)
I also tried it with 3%tin, 5% rutile and 2% RIO and got a dark honey but I
prefer the Butter. Used as a liner in a mug with iron red on the outside,
the yellow looks like the sun is inside the mug.
Best regards,
Carol
>From: Chris and Nissa
>Reply-To: Ceramic Arts Discussion List
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: Re: Iron Yellow
>Date: Sat, 20 Apr 2002 07:20:16 -0500
>
>I've used Iron oxide and rutile to get a yellow at cone 6
>oxidation...unfortunately added it to an unknown mix of matt white base so
>have no way of knowing how to reproduce. (Didn't have any use for matt
>white and was given some unknown premix)-added 7%rutile and 3%red iron
>oxide
>to spice it up and got a great light yellow..not tan at all.
>
>I've tried over ten matt whites from the archives with same percentages of
>oxides and got mostly browns and tans or uglies. I, too, would like to
>make
>another iron yellow like I did years ago at cone 10..but am now working at
>cone 6 (and food Safe).
>
>Chris
>
>
>-----Original Message-----
>From: Ceramic Arts Discussion List [mailto:CLAYART@LSV.CERAMICS.ORG]On
>Behalf Of Hank Murrow
>Sent: Friday, April 19, 2002 10:52 PM
>To: CLAYART@LSV.CERAMICS.ORG
>Subject: Re: Iron Yellow
>
>
> >I keep finding references to using iron oxide to produce straw yellow
>glaze
> >colors, but all my tests of RIO produce tan at lower amounts and browns
>at
> >higher amounts. Is there a trick to getting the yellow color? If so,
>would
> >one of you wonderful people share it with me. Thanks,
> >Wanda
>
>
>Dear Wanda;
>
>At what temperature and atmosphere are you firing? And in what sort
>of kiln? I would like to help you.
>
>Best, Hank
>
>___________________________________________________________________________
_
>__
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.
>
>___________________________________________________________________________
___
>Send postings to clayart@lsv.ceramics.org
>
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.
_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com
Ababi on sat 20 apr 02
Try it with 5 rutile and 10 titanium or even 7-10 rutile and 15-20
titanium I made once a lovely mistake, doubling the amounts
---------- Original Message ----------
>I have a nice glaze, ^6 ox, that's yellow.
>BUTTER SATIN GLOSS
>36 custer feldspar
>20 Frit 3124
>16 Talc
>20 EPK: I calcine half of this so it's 10 regular and 8.6 calcined
>8 Wollastonite
>3% Tin Oxide
>5% rutile (if you want a lighter yellow, use 3%)
>I also tried it with 3%tin, 5% rutile and 2% RIO and got a dark honey
>but I
>prefer the Butter. Used as a liner in a mug with iron red on the
>outside,
>the yellow looks like the sun is inside the mug.
>Best regards,
>Carol
>>From: Chris and Nissa
>>Reply-To: Ceramic Arts Discussion List
>>To: CLAYART@LSV.CERAMICS.ORG
>>Subject: Re: Iron Yellow
>>Date: Sat, 20 Apr 2002 07:20:16 -0500
>>
>>I've used Iron oxide and rutile to get a yellow at cone 6
>>oxidation...unfortunately added it to an unknown mix of matt white
>base so
>>have no way of knowing how to reproduce. (Didn't have any use for matt
>>white and was given some unknown premix)-added 7%rutile and 3%red iron
>>oxide
>>to spice it up and got a great light yellow..not tan at all.
>>
>>I've tried over ten matt whites from the archives with same
>percentages of
>>oxides and got mostly browns and tans or uglies. I, too, would like to
>>make
>>another iron yellow like I did years ago at cone 10..but am now
>working at
>>cone 6 (and food Safe).
>>
>>Chris
>>
>>
>>-----Original Message-----
>>From: Ceramic Arts Discussion List [mailto:CLAYART@LSV.CERAMICS.ORG]On
>>Behalf Of Hank Murrow
>>Sent: Friday, April 19, 2002 10:52 PM
>>To: CLAYART@LSV.CERAMICS.ORG
>>Subject: Re: Iron Yellow
>>
>>
>> >I keep finding references to using iron oxide to produce straw yellow
>>glaze
>> >colors, but all my tests of RIO produce tan at lower amounts and
>browns
>>at
>> >higher amounts. Is there a trick to getting the yellow color? If
>so,
>>would
>> >one of you wonderful people share it with me. Thanks,
>> >Wanda
>>
>>
>>Dear Wanda;
>>
>>At what temperature and atmosphere are you firing? And in what sort
>>of kiln? I would like to help you.
>>
>>Best, Hank
>>
>>_______________________________________________________________________
>_____
>>__
>>Send postings to clayart@lsv.ceramics.org
>>
>>You may look at the archives for the list or change your subscription
>>settings from http://www.ceramics.org/clayart/
>>
>>Moderator of the list is Mel Jacobson who may be reached at
>>melpots@pclink.com.
>>
>>_______________________________________________________________________
>_______
>>Send postings to clayart@lsv.ceramics.org
>>
>>You may look at the archives for the list or change your subscription
>>settings from http://www.ceramics.org/clayart/
>>
>>Moderator of the list is Mel Jacobson who may be reached at
>>melpots@pclink.com.
>_________________________________________________________________
>Join the world=92s largest e-mail service with MSN Hotmail.
>http://www.hotmail.com
>________________________________________________________________________
>______
>Send postings to clayart@lsv.ceramics.org
>You may look at the archives for the list or change your subscription
>settings from http://www.ceramics.org/clayart/
>Moderator of the list is Mel Jacobson who may be reached at
>melpots@pclink.com.
| |
|
