Barrie Paine on tue 28 may 02
Hi Folks, can any one help with a reliable matt black glaze to cone 4 or =
6 electric fired.
Thanks Barrie Paine=20
John Hesselberth on tue 28 may 02
on 5/28/02 4:50 AM, Barrie Paine at Barrie@BARRIEPAINE.CO.NZ wrote:
> Hi Folks, can any one help with a reliable matt black glaze to cone 4 or 6
> electric fired.
> Thanks Barrie Paine
Hi Matt,
The Charcoal Satin I have posted on my web site at
http://www.frogpondpottery.com/glazestability/glaze0021.html
will get you to charcoal. A little more black stain might let you approach
black--you'll have to test and see. This is a glaze a lot of people have
told me they have had good luck with. You can see a picture of it in the
September 2000 Ceramics Monthly in an article Ron Roy and I wrote.
Regards,
John
web sites: http://www.masteringglazes.com and http://www.frogpondpottery.com
EMail: john@frogpondpottery.com
"It is, perhaps, still necessary to say that the very best glazes cannot
conceal badly shaped pots..." David Green, Pottery Glazes
| |
|
