Tony Ferguson on wed 3 jul 02
Hello,
I've given my website a facelifting. Consider taking a look and there is
new Anagama woodfired work.
Thank you.
Tony Ferguson
Woodfired Stoneware & Porcelain, Raku
www.aquariusartgallery.com
218-727-6339
315 N. Lake Ave
Apt 312
Duluth, MN 55806
----- Original Message -----
From: "mel jacobson"
To:
Sent: Tuesday, July 02, 2002 8:58 AM
Subject: IMPORTANT..READ/SAVE
> From Mel:
> Read, Save..Think.\>
> There have been some major changes at AcerS.
> We will be on our own with clayart for a bit so:
>
> Read and understand the instructions for clayart.
> Follow instructions to the letter.
> If you do not unsubscribe...you will get
> 100's of posts from clayart.
> We cannot help you.
> so:
>
> Read the instructions:
>
> IF YOU WANT TO DELETE A POST THAT YOU HAVE SENT TO ME:
> PLEASE USE MELPOTS@PCLINK.COM.
> i read that mail first. a note to clayart will always follow the
> post you want to delete.
> mel
>
> THE DELETE BUTTON IS YOUR BEST FRIEND ON CLAYART.
> USE IT. THERE IS NO LAW THAT ALL POSTS MUST BE READ
>
> *
> *** Welcome to CLAYART (Ceramic Arts Discussion Group) ***
> ** PLEASE READ & SAVE THIS GUIDE for future reference! **
>
> CLAYART is a forum for discussion of issues relating to clay and
> ceramics. CLAYART is a computer conference that serves as a means of
> communication for those interested in the ceramic arts. CLAYART is
> open to anyone wishing to participate, but will be particularly useful
> for those in ceramic-related areas of academia, private studios,
> galleries, etc.
> WHAT TYPE OF MESSAGES ARE APPROPRIATE FOR CLAYART?
> Appropriate postings may include such topics as:
> * aesthetic issues
> * technical problems and solutions
> * exhibition opportunities
> * workshops/seminars
> * conference information
> * job announcements
> * grant information
> * book, video & exhibition reviews
> Purely PRIVATE messages should be avoided on CLAYART. CLAYART is a
> public forum for discussion. You are highly encouraged to keep ALL other
> appropriate discussions public, but private messages should be sent
> directly to their intended receiver.
> HOW TO SEND A MESSAGE TO CLAYART...
> Messages for CLAYART are forwarded directly to list members. Send all
> discussion to this e-mail address: clayart@lsv.ceramics.org
> Please do not submit messages longer than 200 lines. Long messages
> should be broken up into shorter sections and sent as separate
> messages. Please include an appropriate subject line on your message.
> SUBSCRIBING, STARTING & STOPPING MAIL, & SIGNING OFF...
> - a guide to using the listserv commands
> **** IMPORTANT ****
> -DO NOT SEND LISTSERV COMMANDS TO CLAYART!
> -SEND ALL COMMANDS for subscription and setting mail options to:
> listserv@lsv.ceramics.org
> ****All commands to the LISTSERV must be in the body of the message. ****
> Any text in the SUBJECT line of the email message will be ignored. You
must
> NOT
> include ANY other text (signature file, etc) in the message.
> Listserv commands are received by a computer, and are automatically
> implemented. If you include a note or a signature file or even an extra
> punctuation mark in addition to the actual command, the computer will not
> recognize your command. The command will not be carried out.
> If your email address changes and you're still getting ClayArt mail, but
> you can no longer send commands to the listserv@lsv.ceramics.org, please
> contact the listowners (at the end of this message).
> SUBSCRIBING -
> In subscribing to ClayArt you MUST include BOTH your actual first name
> and your last name in the format below. You must subscribe from your
> regular e-mail account.
> To join (subscribe to) CLAYART, send the following e-mail message to the
> listserv@lsv.ceramics.org:
> SUBSCRIBE CLAYART YourFirstName YourLastName
> Remember: write this command, and only this command, in the BODY of the
> message.
> UNSUBSCRIBING -
> To sign off CLAYART permanently, send the following e-mail message to
> the listserv@lsv.ceramics.org :
> SIGNOFF CLAYART
> Remember: write this command, and only this command, in the BODY of the
> message.
> To stop CLAYART mail temporarily, send the following e-mail message to
> listserv@lsv.ceramics.org
> SET CLAYART NOMAIL
> Remember: write this command, and only this command, in the BODY of the
> message.
> To reinstate CLAYART mail delivery, send the following e-mail message to
> the listserv@lsv.ceramics.org
> SET CLAYART MAIL
> Remember: write this command, and only this command, in the BODY of the
> message.
> If you are using a commercial service you may want to set your CLAYART
> subscription to DIGEST, which sends all the mail for one day as a single
> e-mail message. To do this send the following message to
> listserv@lsv.ceramics.org :
> SET CLAYART DIGEST
> Remember: write this command, and only this command, in the BODY of the
> message.
> NOTE: You can reset CLAYART to single mail messages by sending the SET
> CLAYART MAIL command described above.
> Some members of clayart have commented that the headers are longer since
> the list is being moderated. There is a listserv option that may provide
> some relief for some of you. You may specify a short header by sending
> the following message to listserv@lsv.ceramics.org :
> SET CLAYART SHORTHDR
> Remember: write this command, and only this command, in the BODY of the
> message.
> If you decide you don't like the results of this change, sending
> SET CLAYART FULLHDR
> to listserv@lsv.ceramics.org will set it back.
> Remember: write this command, and only this command, in the BODY of the
> message.
> To determine what your CLAYART distribution settings are, send the
> following message to listserv@lsv.ceramics.org:
> QUERY CLAYART
> Remember: write this command, and only this command, in the BODY of the
> message.
> You may want to try the QUERY command if you stop receiving CLAYART
> mail. If there are problems with your e-mail account, the list moderator
> will
> set your CLAYART mail to NOMAIL.
>
> *** REMEMBER *********
> To send a message to CLAYART, send your e-mail message
> to:clayart@lsv.ceramics.org
> To send a COMMAND to the LISTSERV (subscriptions, mail settings, info,
> list
> of subscribers, etc), send your e-mail message to:
> listserv@lsv.ceramics.org
> ************ SPECIAL NOTE FOR AOL USERS ! *******************************
> Please take extra care to keep your mailboxes from overflowing by
> downloading and/or deleting ClayArt mail regularly. Also, please
> sign off from ClayArt BEFORE changing your nickname on AOL or otherwise
> creating a situation where your mail from ClayArt will bounce!
> If you do not adhere to the above, ALL mail to AOL accounts may stop!
> AOL has done this before, and they may do it again.
> Thanks - your clayart listowners.
> ************************************************************************
> *** SPECIAL NOTE OF FREE EMAIL ACCOUNTS WITH SIZE LIMITS! ***
> Please take extra care to keep your mailboxes from overflowing by
> downloading and/or deleting ClayArt mail regularly. If you do not adhere
> to the above, ALL mail to your account will stop!
> Thanks - your clayart listowners.
> ************************************************************************
> ************* ALL CLAYART USERS *******************************
> Listserv has a feature that will delete your account if mail cannot be
> delivered to your account for 3 days or 200 messages have been returned.
> Thanks - your clayart listowners.
> *************************************************************************
>
> ************************************************************************
> If you have problems with your CLAYART subscription, you may contact the
> list moderator directly.
> ************************************************************************
> * CLAYART MODERATOR
> *
> clayart mail
> melpots2@pclink.com
> From:
> Minnetonka, Minnesota, U.S.A.web site: http://www.pclink.com/melpots
>
> clayart mail
> melpots2@pclink.com
>
> From:
> Minnetonka, Minnesota, U.S.A.
> web site: http://www.pclink.com/melpots
>
>
>
> clayart mail
> melpots2@pclink.com
>
>
> From:
> Minnetonka, Minnesota, U.S.A.
> web site: http://www.pclink.com/melpots
>
>
____________________________________________________________________________
__
> Send postings to clayart@lsv.ceramics.org
>
> You may look at the archives for the list or change your subscription
> settings from http://www.ceramics.org/clayart/
>
> Moderator of the list is Mel Jacobson who may be reached at
melpots@pclink.com.
>
| |
|
